Single fuel cells with bilayer supported cathodes are manufactured and tested. The cathodes consist of a high-porous La0.6Sr0.4MnO3 support with the thickness of approximately 1 mm and a functional composite layer with the thickness of 13–15 μm made of La0.75Sr0.2MnO3 and 8YSZ. Voltammetric and power characteristics of single fuel cells with a supported cathode, thin-film YSZ electrolyte, and platinum cathode are determined. The conclusion as to the significant contribution into the polarization overpotential losses on the cathode is made on the basis of the measurements of electric fuel cell characteristics. It decreases significantly as a result of the supported cathode modification by praseodymium oxide. At 850°C and voltage of 0.81 V, electric power density of a fuel cell was 1.65 W/cm2.
12 September 2023 in Electrochemical Materials and Technologies
The idea of nuclear-hydrogen energy draws growing interest of power engineering specialists. One of the ways to implement such a direction of development is integration of nuclear power station and high temperature electrochemical devices, namely solid oxide electrolyzers (SOE) and fuel cells (SOFC). This paper reviews the principal features of the devices and their high efficiency of energy transformation. The electrical efficiency of the SOEs can exceed 100 % at the expense of high-grade potential heat energy consumed by the electrolyzer. The efficiency of the SOFCs amounts to 70 %. The state of the art of long-term tests of single cells of SOEs and SOFC stacks are presented.
30 December 2011 in Russian Journal of Electrochemistry
Single solid-oxide fuel cells (SOFCs) with a porous (36-41%) supporting Ni-cermet anode are manufactured and tested. The effect of the thickness of the supporting Ni-cermet anode on the electrochemical characteristics of single SOFCs is studied. It is shown that polarization losses on electrodes at the current density of 1.2 A/cm2 increase by about 2 times from 0.13 to 0.25 V at an increase in the thickness of the supporting Ni-cermet anode from 0.40 to 1.27 mm. The impedance spectroscopy method is used to identify relaxation processes responsible for the behavior of the fuel cell anode and cathode. It is found that a significant percentage of polarization losses on the anode is due to transport limitations in fuel supply to the three-phase nickel/electrolyte/gas phase interface and removal of the reaction products away from it.
1 July 2010 in Russian Journal of Electrochemistry
Electrical conduction of the oxide BaZr0.9Y0.1O3 − δis studied by electrochemical impedance spectroscopy as a function of temperature (300–600°C) and the oxygen partial pressure in gas phase...