In recent years, the underwater wireless sensor network (UWSN) has received a significant interest among research communities for several applications, such as disaster management, water quality prediction, environmental observance, underwater navigation, etc. The UWSN comprises a massive number of sensors placed in rivers and oceans for observing the underwater environment. However, the underwater sensors are restricted to energy and it is tedious to recharge/replace batteries, resulting in energy efficiency being a major challenge. Clustering and multi-hop routing protocols are considered energy-efficient solutions for UWSN. However, the cluster-based routing protocols for traditional wireless networks could not be feasible for UWSN owing to the underwater current, low bandwidth, high water pressure, propagation delay, and error probability. To resolve these issues and achieve energy efficiency in UWSN, this study focuses on designing the metaheuristics-based clustering with a routing protocol for UWSN, named MCR-UWSN. The goal of the MCR-UWSN technique is to elect an efficient set of cluster heads (CHs) and route to destination. The MCR-UWSN technique involves the designing of cultural emperor penguin optimizer-based clustering (CEPOC) techniques to construct clusters. Besides, the multi-hop routing technique, alongside the grasshopper optimization (MHR-GOA) technique, is derived using multiple input parameters. The performance of the MCR-UWSN technique was validated, and the results are inspected in terms of different measures. The experimental results highlighted an enhanced performance of the MCR-UWSN technique over the recent state-of-art techniques.

A Flying Ad-hoc network constitutes many sensor nodes with limited processing speed and storage capacity as they institute a minor battery-driven device with a limited quantity of energy. One of the primary roles of the sensor node is to store and transmit the collected information to the base station (BS). Thus, the life span of the network is the main criterion for the efficient design of the FANETS Network, as sensor nodes always have limited resources. In this paper, we present a methodology of an energy-efficient clustering algorithm for collecting and transmitting data based on the Optimized Low-Energy Adaptive Clustering Hierarchy (LEACH) protocol. The selection of CH is grounded on the new optimized threshold function. In contrast, LEACH is a hierarchical routing protocol that randomly selects cluster head nodes in a loop and results in an increased cluster headcount, but also causes more rapid power consumption. Thus, we have to circumvent these limitations by improving the LEACH Protocol. Our proposed algorithm diminishes the energy usage for data transmission in the routing protocol, and the network’s lifetime is enhanced as it also maximizes the residual energy of nodes. The experimental results performed on MATLAB yield better performance than the existing LEACH and Centralized Low-Energy Adaptive Clustering Hierarchy Protocol in terms of energy efficiency per unit node and the packet delivery ratio with less energy utilization. In addition, the First Node Death (FND) is also meliorated when compared to the LEACH and LEACH-C protocols.

Mobile ad hoc networks (MANETs) are self-organizing nodes in a mobile network that collaborate to form dynamic network architecture to establish connections. In MANET, data must traverse several intermediary nodes before reaching its destination. There must be security in place to prevent hostile nodes from accessing this data. Multiple methods were suggested in literature for securing routing; these techniques tackle different aspects of security. In order to enhance fault tolerance, wireless network multipath routing is typically used instead of the original single path routing. The routing protocol Genetic Algorithm with Hill climbing (GAHC) described in this article shows a hybrid GA-Hill Climbing algorithm that picks the optimal route in multipath. Prior to this in the beginning, the Improved fuzzy C-means algorithm method was built on density peak, and cluster heads (CHs) were chosen in a predicted manner, based on recent, indirect, and direct trust. The computation is based worth nodes are at the trust threshold found in addition. Even CHs take part in the alternate paths, the blend of all the many paths from these Cluster Heads that chooses the optimal route, which is based on the predicted hybrid protocol, as well as the optimum route’s aggregate features such as throughput, latency, and connection. This suggested technique requires a minimum amount of energy of 0.10 m joules and a small amount of delay time of 0.004 msec, which also yields a maximum throughput of 0.85 bits per second, a maximum detection rate of 91 percent and maximum packet delivery ratio of 89percent. The suggested approach was put through the paces with the selective packet dropping attack.

The study and exploration of massive multiple-input multiple-output (MMIMO) and millimeter-wave wireless access technology has been spurred by a shortage of bandwidth in the wireless communication sector. Massive MIMO, which combines antennas at the transmitter and receiver, is a key enabler technology for next-generation networks to enable exceptional spectrum and energy efficiency with simple processing techniques. For massive MIMOs, the lower band microwave or millimeter-wave band and the antenna are impeccably combined with RF transceivers. As a result, the 5G wireless communication antenna differs from traditional antennas in many ways. A new concept of the MIMO tri-band hexagonal antenna array is being introduced for next-generation cellular networks. With a total scaling dimension of 150 × 75 mm², the structure consists of multiple hexagonal fractal antenna components at different corners of the patch. The radiating patch resonates at 2.55–2.75, 3.45–3.7, and 5.65–6.05 GHz (FR1 band) for better return loss (S11) of more than 15 dB in all three operating bands. The coplanar waveguide (CPW) feeding technique and defective ground structure in the ground plane have been employed for effective impedance matching. The deviation of the main lobe of the radiation pattern is achieved using a two-element microstrip Taylor antenna array with series feeding, which also boosts the antenna array’s bandwidth and minimizes sidelobe. The proposed antenna is designed, simulated, and tested in far-field radiating conditions and generates tri-band S-parameters with sufficient separation and high-quality double-polarized radiation. The fabrication and testing of MIMO antennas were completed, where the measurement results matched the simulation results. In addition, the 5G smartphone antenna system requires a new, lightweight phased microwave antenna (μ-wave) with wide bandwidth and a fire extender. Because of its decent performance and compact architectures, the proposed smartphone antenna array architecture is a better entrant for upcoming 5G cellular implementations.

Mobile ad hoc networks (MANET) are self-organizing, rapidly deployable wireless networks excellent for outdoor events, communications in places lacking radio infrastructure, disasters, and military activities. Because network topologies are flexible and dynamic, security may be the most vulnerable point in the network, open to attacks including eavesdropping, routing, and application changes. MANET has more security flaws than quality of service (QoS). It is thus recommended to use intrusion detection, which regulates system to detect further security problems. Monitoring for intrusions is crucial for prevention and additional security against unwanted access. The loss of a mobile node’s power source may affect the node’s ability to forward packets, which is reliant on the system’s overall life. In this paper, the Bacteria for Aging Optimization Algorithm (BFOA), which finds the ideal hops in advancing the routing, is utilized to offer a trust-based protected and energy-efficient navigation in MANETs using a trust-based protected and energy-efficient navigation algorithm. The fuzzy clustering algorithm is activated first, and the Cluster Heads (CHs) are selected depending on the value of indirect, direct, and recent trust that each CH has. In addition, value nodes were discovered based on trust levels. Moreover, the CHs are engaged in multi hop routing, and the selection of the ideal route is based on the projected protocol, which selects the best routes based on latency, throughput, and connection within the course’s boundaries. Even without an attack, compared to the exiting methods EA-DRP & EE-OHRA the proposed secure optimization routing (BFOA) algorithm produced a minimum energy of 0.10 m joules, a minimal latency of 0.0035 m sec, a maximum throughput of 0.70 bps, and an 83 percent detection rate, with enhanced results obtained by using a selective packet dropping attack

Underwater wireless sensor networks (UWSNs) comprise numerous underwater wireless sensor nodes dispersed in the marine environment, which find applicability in several areas like data collection, navigation, resource investigation, surveillance, and disaster prediction. Because of the usage of restricted battery capacity and the difficulty in replacing or charging the inbuilt batteries, energy efficiency becomes a challenging issue in the design of UWSN. Earlier studies reported that clustering and routing are considered effective ways of attaining energy efficacy in the UWSN. Clustering and routing processes can be treated as nondeterministic polynomial-time (NP) hard optimization problems, and they can be addressed by the use of metaheuristics. This study introduces an improved metaheuristics-based clustering with multihop routing protocol for underwater wireless sensor networks, named the IMCMR-UWSN technique. The major aim of the IMCMR-UWSN technique is to choose cluster heads (CHs) and optimal routes to a destination. The IMCMR-UWSN technique incorporates two major processes, namely the chaotic krill head algorithm (CKHA)-based clustering and self-adaptive glow worm swarm optimization algorithm (SA-GSO)-based multihop routing. The CKHA technique selects CHs and organizes clusters based on different parameters such as residual energy, intra-cluster distance, and inter-cluster distance. Similarly, the SA-GSO algorithm derives a fitness function involving four parameters, namely residual energy, delay, distance, and trust. Utilization of the IMCMR-UWSN technique helps to significantly boost the energy efficiency and lifetime of the UWSN. To ensure the improved performance of the IMCMR-UWSN technique, a series of simulations were carried out, and the comparative results reported the supremacy of the IMCMR-UWSN technique in terms of different measures.