In this paper, we present the design of a novel 3-RUS/RRR redundantly actuated parallel mechanism for ankle rehabilitation based on the principle from the conceptual design. The proposed mechanism can actualize the rotational movements of the ankle in three directions while at the same time the mechanism center of rotations can match the ankle axes of rotations compared with other multi-degree-of-freedom devices, owing to the structural characteristics of the special constraint limb and platform. A new actuator redundancy scheme is used, which not only still maintains all inherent advantages from actuator redundancy but also possesses the kinematic partially decouple feature that improves the flexibility of the robotic system. Kinematic performances, such as dexterity, singularity and stiffness, are analyzed based on the computed Jacobian. Then simulation is performed. All the results show that the redundant robot has no singularity, better dexterity and stiffness within the prescribed workspace in comparison with the corresponding 3-RUS/RRR nonredundant robot, and is suitable for rehabilitation exercise.

A high-level perceptual model found in the human brain is essential to guide robotic control when facing perception-intensive interactive tasks. Soft robots with inherent softness may benefit from such mechanisms when interacting with their surroundings. Here, we propose an expected-actual perception-action loop and demonstrate the model on a sensorized soft continuum robot. By sensing and matching expected and actual shape (1.4% estimation error on average), at each perception loop, our robot system rapidly (detection within 0.4 s) and robustly detects contact and distinguishes deformation sources, whether external and internal actions are applied separately or simultaneously. We also show that our soft arm can accurately perceive contact direction in both static and dynamic configurations (error below 10°), even in interactive environments without vision. The potential of our method are demonstrated in two experimental scenarios: learning to autonomously navigate by touching the walls, and teaching and repeating desired configurations of position and force through interaction with human operators.

Kresling pattern origami-inspired structural design has been widely investigated using its bistable property and the single coupling degree of freedom (DOF). In order to obtain new properties or new origami-inspired structures, it needs to innovate the crease lines in the flat sheet of Kresling pattern origami. Here, we present a derivative of Kresling pattern origami—multi-triangles cylindrical origami (MTCO) with tristable property. The truss model is modified based on the switchable active crease lines during the folding motion of the MTCO. Using the energy landscape obtained from the modified truss model, the tristable property is validated and extended to Kresling pattern origami. Simultaneously, the high stiffness property of the third stable state and some special stable states are discussed. In addition, MTCO-inspired metamaterials with deployable property and tunable stiffness, and MTCO-inspired robotic arms with wide movement ranges and rich motion forms are created. These works promote research on Kresling pattern origami, and the design ideas of the metamaterials and robotic arms play a positive role in improving the stiffness of deployable structures and conceiving motion robots.

Continuum robots driven by rods have a wide range of applications, such as detection and maintenance tasks in unstructured environments. However, their inherent nature of flexibility also limits their function. Thus, variable stiffness mechanisms for continuum robots have consistently attracted the attention of researchers in recent years. In this letter, a winding-styled rope inspired by snakes’ behavior is first built into the constraint disk of a rod-driven continuum robot. Combined with shape memory alloy (SMA) spring, the winding ropes perform a variable stiffness or ‘lock’ function by adjusting the friction between the ropes and rods. A maximum static friction is up to 2 times the spring tension according to the test results. Based on the fitting relationship between SMA spring tension and friction, the established kinetostatics model can predict the manipulator configuration. Furthermore, comparative experiments proved that the stiffness change is mainly caused by the proposed mechanism. By controlling the temperature of SMA, the variable stiffness of the manipulator is achieved. The C-shape has a maximum stiffness of 0.03505 N/mm and that this shape has a maximum stiffness increase of 300%.

SUMMARY: In this paper, we present the design of two serial spherical mechanisms to substitute for a single spherical joint that is usually used to connect the platform with the base in three degrees of freedom parallel mechanisms. According to the principle derived from the conceptual design, through using the two serial spherical mechanisms as the constraint limb, several redundantly actuated parallel mechanisms are proposed for ankle rehabilitation. The proposed parallel mechanisms all can perform the rotational movements of the ankle in three directions while at the same time the mechanism center of rotations can match the ankle axes of rotations compared with other multi-degree-of-freedom devices, due to the structural characteristics of the special constraint limb and platform. Two special parallel mechanisms are selected to analyze their kinematical performances, such as workspace, dexterity, singularity, and stiffness, based on the computed Jacobian. The results show that the proposed scheme of actuator redundancy can guarantee that the redundantly actuated parallel mechanisms have no singularity, better dexterity, and stiffness within the prescribed workspace in comparison with the corresponding non-redundant parallel mechanisms. In addition, the proposed mechanisms possess certain reconfigurable capacity based on control strategies or rehabilitation modes to obtain sound performance for completing ankle rehabilitation exercise.