With the recent advances in the Internet of Things (IoT), the significance of information technologies to modern industry is upgraded from purely providing surveillancecentric functions to building a comprehensive information framework of the industrial processes. Innovative techniques and concepts emerge under such circumstances, e.g., digital twin, which essentially involves data acquisition, human-machine-product interconnection, knowledge discovery and generation, and intelligent control, etc. Signal processing techniques are crucial to the aforementioned procedures but face unprecedented challenges when they are applied in the complex industrial environments. In this article, we survey the promising industrial applications of IoT technologies and discuss the challenges and recent advances in this area. We also share our early experience with Pavatar, a real-world industrial IoT system that enables comprehensive surveillance and remote diagnosis for ultrahigh-voltage converter station (UHVCS). Potential research challenges in building such a system are also categorized and discussed to illuminate the future directions.
3 October 2017 in IEEE/ACM Transactions on Networking
Even though indoor smoking ban is being put into practice in civilized countries, existing vision or sensor-based smoking detection methods cannot provide ubiquitous detection service. In this paper, we take the first attempt to build a ubiquitous passive smoking detection system, Smokey, which leverages the patterns smoking leaves on WiFi signal to identify the smoking activity even in the non-line-of-sight and through-wall environments. We study the behaviors of smokers and leverage the common features to recognize the series of motions during smoking, avoiding the target-dependent training set to achieve the high accuracy. We design a foreground detection-based motion acquisition method to extract the meaningful information from multiple noisy subcarriers even influenced by posture changes. Without the requirement of target’s compliance, we leverage the rhythmical patterns of smoking to detect the smoking activities. We also leverage the diversity of multiple antennas to enhance the robustness of Smokey. Due to the convenience of integrating new antennas, Smokey is scalable in practice for ubiquitous smoking detection. We prototype Smokey with the commodity WiFi infrastructure and evaluate its performance in real environments. Experimental results show Smokey is accurate and robust in various scenarios.
12 April 2017 in IEEE/ACM Transactions on Networking
Shopping behavior data is of great importance in understanding the effectiveness of marketing and merchandising campaigns. Online clothing stores are capable of capturing customer shopping behavior by analyzing the click streams and customer shopping carts. Retailers with physical clothing stores, however, still lack effective methods to comprehensively identify shopping behaviors. In this paper, we show that backscatter signals of passive RFID tags can be exploited to detect and record how customers browse stores, which garments they pay attention to, and which garments they usually pair up. The intuition is that the phase readings of tags attached to items will demonstrate distinct yet stable patterns in a time-series when customers look at, pick out, or turn over desired items. We design ShopMiner, a framework that harnesses these unique spatial-temporal correlations of time-series phase readings to detect comprehensive shopping behaviors. We have implemented a prototype of ShopMiner with a COTS RFID reader and four antennas, and tested its effectiveness in two typical indoor environments. Empirical studies from two-week shopping-like data show that ShopMiner is able to identify customer shopping behaviors with high accuracy and low overhead, and is robust to interference.
27 January 2020 in IEEE/ACM Transactions on Networking
Cross-technology communication (CTC) is a technique that enables direct communication among different wireless technologies. Recent works in this area have made substantial progress, but CTC from ZigBee to WiFi remains an open problem. In this paper, we propose ZigFi, a novel CTC framework that enables communication from ZigBee to WiFi. ZigFi carefully overlaps ZigBee packets with WiFi packets. Through experiments we show that Channel State Information (CSI) of the overlapped packets can be used to convey data from ZigBee to WiFi. Based on this finding, we propose a receiver-initiated protocol and translate the decoding problem into a problem of CSI classification with Support Vector Machine. We further build a generic model through experiments, which describes the relationship between the Signal to Interference and Noise Ratio (SINR) and the symbol error rate (SER). Moreover, we extend ZigFi to multiple-to-one concurrent transmissions. We implement ZigFi on commercial-off-the-shelf WiFi and ZigBee devices. We evaluate the performance of ZigFi under different experimental settings. The results demonstrate that ZigFi achieves a throughput of 215.9bps, which is 18X faster than the state of the arts.
28 October 2019 in IEEE Transactions on Mobile Computing
RFID tracking attracts a lot of research efforts in recent years. Most of the existing approaches, however, adopt an orientation-oblivious model. When tracking a target whose orientation changes, those approaches suffer from serious accuracy degradation. In order to achieve target tracking with pervasive applicability in various scenarios, we in this paper propose OmniTrack, an orientation-aware RFID tracking approach. Our study presents a generic model that discribes the linear relationship between the tag orientation and the phase change of the backscattered signals. Based on this finding, we propose an orientation-aware phase model to explicitly quantify the respective impact of the read-tag distance and the tag's orientation. OmniTrack addresses practical challenges in tracking the location and orientation of a mobile tag. Our experimental results demonstrate that OmniTrack achieves centimeter-level location accuracy and has significant advantages in tracking targets with varing orientations, compared to the state-of-the-art approaches.
The ever-developing Internet of Things (IoT) brings the prosperity of wireless sensing and control applications. In many scenarios, different wireless technologies coexist in the shared frequency medium as well as the physical space. Such wireless coexistence may lead to serious cross-technology interference (CTI) problems, e.g., channel competition, signal collision, and throughput degradation. Compared with traditional methods like interference avoidance, tolerance, and concurrency mechanism, direct and timely information exchange among heterogeneous devices is therefore a fundamental requirement to ensure the usability, inter-operability, and reliability of the IoT. Under this circumstance, Cross-Technology Communication (CTC) technique thus becomes a hot topic in both academic and industrial fields, which aims at directly exchanging data among heterogeneous devices that follow different standards. This paper comprehensively summarizes the CTC techniques and reveals that the key challenge for CTC lies in the heterogeneity of IoT devices, including the incompatibility of technical standards and the asymmetry of connection capability. Based on the above finding, we present a taxonomy of the existing CTC works (packet-level CTCs and physical-level CTCs) and compare the existing CTC techniques in terms of throughput, reliability, hardware modification, and concurrency.