Yangchuan Ke

Prof. Yangchuan Ke


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2019 in RSC Advances
Verified
Journal Article
Open access
PDF file
SLShichao Lu
Shichao Lu
XWXiaoyan Wang
Xiaoyan Wang
ZMZhaorui Meng
Zhaorui Meng
QDQingchun Deng
Qingchun Deng
FPFangfang Peng
Fangfang Peng
FQFengzhong Qi
Fengzhong Qi
High performance cement-based nanocomposites were successfully fabricated through the use of oil well cement filled with multiwalled carbon nanotubes (MWCNTs) as reinforcements. The dispersibilities of four dispersing agents for the MWCNTs were investigated and compared. The dispersed morphologies and structural characteristics of the MWCNTs were analyzed via TEM, FTIR and Raman spectroscopy studies. The effects of MWCNT addition on the rheological behavior and fluidity of oil well cement slurry were discussed. The mechanical properties of the cement-based nanocomposites with different MWCNT content values and different curing ages were explored and analyzed. Furthermore, the microstructures of the MWCNT reinforced cementitious nanocomposites were characterized via XRD, SEM, EDS, total porosity and pore size distribution studies. The results demonstrated that the 28 day compressive strength and 28 day flexural strength of the 0.05 wt% MWCNT cementitious nanocomposite increased by 37.50% and 45.79%, respectively, compared with a pure cement matrix. The elastic moduli of a 0.05 wt% MWCNT cementitious sample declined by 19.07% and 35.39% under uniaxial and triaxial stress, respectively. XRD and pore structure analysis indicated that the MWCNTs could accelerate the hydration process, increase the amount of hydration products and optimize the pore size distribution within the matrix. Additionally, crack bridging, pulling out, network filling and a calcium-silicate-hydrate (C–S–H) phase were exhibited by SEM images. Meanwhile, the reinforcing and toughening mechanism of MWCNTs was also discussed; these had a beneficial influence on the mechanical properties.

1 March 2013 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
SCSongzhe Chen
Songzhe Chen
RWRenling Wang
Renling Wang
PZPing Zhang
Ping Zhang
LWLaijun Wang
Laijun Wang
JXJingming Xu
Jingming Xu
YKYangchuan Ke
Yangchuan Ke

10 December 2019 in Materials Letters
Verified
Journal Article
Closed access
SLShichao Lu
Shichao Lu
YZYi Zhao
Yi Zhao
XHXu Hu
Xu Hu
YLYuan Lin
Yuan Lin
YKYangchuan Ke
Yangchuan Ke


10 April 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
SLShichao Lu
Shichao Lu
XWXiaoyan Wang
Xiaoyan Wang
YKYangchuan Ke
Yangchuan Ke
A series of nano-ZrO2 reinforced cementitious composites were prepared through mixing prepared nano-ZrO2 suspension with Class G oil well cement in rotary mixer. The rheological properties of cement slurry, the mechanical properties and microstructure of cementitious composites were studied. The results indicated that the addition of nano-ZrO2 below 1 wt% meet the requirements of cementing construction. The early compressive strength of cement stone for 1 day was about 35.6 MPa~41.8 MPa when the amount of nano-ZrO2 was 0.05 wt%~1 wt%. The elastic modulus of nano-ZrO2 cement stone was 8.14 GPa under uniaxial stress state. Microstructure analysis revealed that nano-ZrO2 could enhance the toughness of cement paste.