The electrification of the commuter aircraft is instrumental in the development of novel propulsion systems. The scope of this work aims to explore the design space of a parallel hybrid-electric configuration with an entry into service date of 2030 and beyond and determine the impact of other disciplines on conceptual design, such as components positioning, aircraft stability and structural integrity. Three levels of conceptual sizing are applied and linked with a parametric aircraft geometry tool, to generate the aircraft’s geometry and position the components. Subsequently, the structural optimisation of the wing box is performed, providing the centre of gravity of the components placed inside the wing, that minimise the induced stresses. Furthermore, the stability and trim analysis follow, with the former being highly affected by the positioning of components. Results are compared to a similar aircraft with entry into service technology of 2014 and it is indicated that in terms of block fuel reduction the total electrification benefit increases with the increase of degree of hybridisation, if aircraft mass is kept constant. On the other hand, if battery specific energy is kept constant, similar block fuel reduction is possible with lower hybridisation degrees. The potential for improvement in terms of carbon dioxide emissions and block fuel reduction ranges from 15.73% to 21.44% compared to the conventional aircraft, for levels of battery specific energy of 0.92 and 1.14 kWh/kg respectively. Finally, the component positioning evaluation indicates a maximum weight limitation of 240 kg for the addition of an aft boundary layer ingestion fan to a tube and wing aircraft configuration, without compromising the aircraft static stability.

When it comes to novel aircraft concepts, thermal management system (TMS) design is a ubiquitous task, even at the conceptual design phase. This is owing to its impact on the total weight of the ai...

This work is a feasibility study of a 19-passenger hybrid-electric aircraft, to serve the short-haul segment within the 200–600 nautical miles. Its ambition is to answer some dominating research questions, during the evaluation and design of aircraft based on alternative propulsion architectures. The potential entry into service (EIS) is foreseen beyond 2030. A literature review is performed to identify similar concepts under research and development. After the requirements' definition, the first level of conceptual design is employed. The objective of design selections is driven by the need to reduce CO₂ emissions and accommodate aircraft electrification with boundary layer ingestion engines. Based on a set of assumptions, a methodology for the sizing of the hybrid-electric aircraft is described to explore the basis of the design space, incorporating a parametric analysis for the consideration of boundary layer ingestion effects. Additionally, a methodology for the energy storage positioning is provided to highlight the multidisciplinary aspects between the sizing of an aircraft, the selected architecture (series/parallel partial hybrid), and the storage characteristics. The results show that it is not possible to fulfill the initial design requirements (600 nmi) with a fully-electric aircraft configuration, due to the far-fetched battery necessities. It is also highlighted that compliance with airworthiness standards is favored by switching to hybrid-electric aircraft configurations and relaxing the design requirements (targeted range, payload, battery technology). Finally, the lower degree of hybridization (40%) is observed to have a higher energy efficiency (−12% energy consumption) compared to the higher degree of hybridization (50%) and greater CO₂ reduction, with respect to the conventional configuration.

This work is concerned with the investigation of thermal energy storage (TES) in relation to gas turbine inlet air cooling. The utilization of such techniques in simple gas turbine or combined cycle plants leads to improvement of flexibility and overall performance. Its scope is to review the various methods used to provide gas turbine power augmentation through inlet cooling and focus on the rising opportunities when these are combined with thermal energy storage. The results show that there is great potential in such systems due to their capability to provide intake conditioning of the gas turbine, decoupled from the ambient conditions. Moreover, latent heat TES have the strongest potential (compared to sensible heat TES) towards integrated inlet conditioning systems, making them a comparable solution to the more conventional cooling methods and uniquely suitable for energy production applications where stabilization of GT air inlet temperature is a requisite. Considering the system’s thermophysical, environmental and economic characteristics, employing TES leads to more than 10% power augmentation.

Hybrid-electric propulsion is a promising alternative to sustainable aviation and is mainly considered for the commuter and regional aircraft class. However, the development of hybrid-electric propulsion variants is affected by the technology readiness level of electric components. The components’ technology will determine the electrification benefit, compared to a conventional aircraft, and will suggest which is the most beneficial variant and which has a closer entry into service date. Within this work, three different dates are explored, namely 2027, 2030 and 2040, to size three Parallel and three Series hybrid-electric architecture variants using an in-house aircraft sizing tool. All variants are compared to a conventional configuration sized using technological assumptions of 2014, with the main comparison metrics being the aircraft block fuel, energy consumption, direct operating cost and holistic environmental impact. On one hand, the Parallel configurations have reduced maximum take-off mass and mission energy consumption compared to the Series, however, the latter show a greater potential for block fuel reduction and require less onboard energy for the same mission. The annual operating cost evaluation indicates that the Parallel hybrid variant of 2030 has greater operational costs than the respective Series variant; however, it has reduced capital costs compared to the latter, making it more economical to operate considering both costs. Additionally, in the case of an energy recession, both hybrid variants of 2030 show a further cost reduction, with the Series having a total reduction of 10.4% excluding capital costs, compared to the reference aircraft. Moreover, the life cycle assessment shows that the Series variants have a lower environmental impact, both compared to the reference aircraft and the Parallel variants. The former could be up to 59.7% less detrimental to the environment than the reference aircraft, whereas the latter up to 23.9%, with the integration of renewable sources for electricity production. Finally, by the year 2040, the Series variant shows outstanding performance in all comparison metrics, compared to the Parallel and the reference aircraft.

This study deals with the optimization of performance for a hybrid-electric propulsion system. It focuses on the modeling and power management frameworks, while evaluation is done on a single flight basis. The main objective is to extract the maximum out of the novel powertrain archetype. Two hybridization factors are considered. The pair helps to describe the degree of hybridization at the power supply and power consumption levels. Their revised mathematical definition facilitates a unique method of hybrid-electric propulsion system modeling that maximizes the conveyed amount of information. An in-house computational tool is developed. It employs a genetic algorithm optimizer in the interest of managing power usage during flight. Energy consumption is set as the objective function. The operation of a 19-seater, commuter aircraft is investigated. Turbo-electric, series-hybrid, parallel-hybrid, and series-parallel variants are derived from a generic composition. An analysis on their optimized performance, with different technological readiness levels for 2020 and 2035, is aimed at identifying where each system performs best. Considering 2020 technology, it does not yield a viable hybrid-electric configuration, without suffering significant payload penalties. Architectures relying on mechanical propulsors show promise of 15% reduction to energy consumption, accounting for 2035 readiness levels. The concepts of Boundary Layer Ingestion and Distributed Propulsion display the potential to boost electrified propulsion. The series-hybrid and series-parallel configurations are the primary beneficiaries of these concepts, displaying up to 30% reduction in fuel and 20% reduction in energy consumption.