Liquid crystals are a promising candidate for development of active plasmonics due to their large birefringence, low driving threshold, and versatile driving methods. We review recent progress on the interdisciplinary research field of liquid crystal based plasmonics. The research scope of this field is to build the next generation of reconfigurable plasmonic devices by combining liquid crystals with plasmonic nanostructures. Various active plasmonic devices, such as switches, modulators, color filters, absorbers, have been demonstrated. This review is structured to cover active plasmonic devices from two aspects: functionalities and driven methods. We hope this review would provide basic knowledge for a new researcher to get familiar with the field, and serve as a reference for experienced researchers to keep up the current research trends.

We show the fabrication of well-aligned gold and silver nanopillars with various array parameters via interference lithography followed by ion beam milling and compare the etching rates of these two metallic materials. Silver is suitable for fabricating ultrafine arrays with ultrasmall separations due to high milling rates. The optical properties of the fabricated nanopillars are specifically characterized from both normal incidence and oblique incident angles. Tunable surface plasmon resonances are achieved with varying structural parameters. Strong coupling effects are enabled when the separation between adjacent nanopillars is dramatically reduced, leading to useful applications in sensing and waveguiding.

By combining different plasmonic nanostructures with conventional sensing configurations, chemical/biosensors with significantly enhanced device performance can be achieved. The fast development of plasmon‐assisted devices benefits from the advance of nanofabrication technology. In this review, we first briefly show the experimental configurations for testing plasmon enhanced sensing signals and then summarize the classic nanogeometries which are extensively used in sensing applications. By design, dramatic increment of optical signals can be obtained and further applied to gas, refractive index and liquid sensing.

We report maskless fabrication of high-aspect-ratio slanted annular aperture arrays (SAAAs) in gold films using focused ion beam lithography. By tilting the substrate, SAAAs with the desired tilting angle can be fabricated. Our experimental results demonstrate accurate control over aperture size, obliqueness, and reproducibility. We also show that the resulted plasmonic resonances of SAAAs can be effectively tuned via obliqueness control. This versatile approach may enable fabrication of more complicated plasmonic nanostructures. The demonstrated gold SAAAs could also find many potential applications in plasmon-assisted sensing and surface enhanced spectroscopy.