A series of Mn1−xCdxS solid solutions with hexagonal wurtzite structure have been fabricated with the assistance of L-cystine as the S source and chelating reagent via a facile hydrothermal route at a lower temperature (130 °C). The as-synthesized products are characterized by XRD, TEM, HRTEM, EDS, XPS, ICP, FTIR, UV-vis and BET techniques, while the photocatalytic activities of the solid solutions for H2 evolution from water decomposition are evaluated in the presence of Na2S–Na2SO3 as sacrificial reagents under visible light illumination. The photocatalytic H2 evolution is found to be strongly dependent on the ratio of CdS to MnS as well as the band gap energies. Among all samples, the highest photocatalytic activity is observed on the Mn0.24Cd0.76S photocatalyst, with the rate of H2-production of 10.9 mmol h−1 g−1, corresponding to an apparent quantum yield as high as 9.5% at 420 nm even in the absence of co-catalysts, which far exceeds that of CdS. Moreover, Mn0.24Cd0.76S solid solution also displays good stability and anti-photocorrosion capability during the photocatalytic reduction of water to hydrogen under visible light. The excellent photoactivity of Mn0.24Cd0.76S solid solution is mainly related to the band-gap structure as well as large specific surface area and high crystallinity. The proposed hydrothermal method using L-cystine as the S source provides a simple, cost-effective and environmentally friendly approach to fabricate other multi-component chalcogenide solid solutions.
Chain-like MoS2 assemblies consisting of hexagonal MoS2 nanoparticles (20–60 nm) have been successfully synthesized in a Triton X-100/cyclohexane/hexanol/water W/O reverse microemulsion in the presence of (NH4)2MoS4 as the molybdenum source and NH2OH·HCl as the reducing agent. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and UV-vis diffuse reflectance absorption spectra. The influence of synthetic parameters such as acidity, water/oil ratio (ω0), aging time and annealing temperature on the formation of MoS2 assemblies was investigated. TEM analysis showed that these synthetic factors played important roles in controlling the size of MoS2 nanoparticles and the length of the chain-like MoS2 assemblies. XRD analysis indicated that the well-crystallized MoS2 nanoparticles could be obtained by annealing the precursors at 700°C for 2 h under a flow of N2 atmosphere. In addition, the as-prepared chain-like MoS2 nanoparticles exhibited excellent photocatalytic H2 activity in Ru(bpy) 32+ -MoS2-H2A three-component molecular systems under visible light irradiation.
1 November 2013 in Journal of Colloid and Interface Science