A novel glucose biosensor was constructed by using ferrocene-carbonyl-β-cyclodextrin (FcCD) inclusive complex as electron-transfer mediator and carbon nanotubes (CNTs) as electron-transfer promoter. FcCD inclusive complex and glucose oxidase (GOx) were covalently bonded to CNTs by poly-L-lysine (PLL) to fabricate a glucose biosensor. The electrocatalytic oxidation of glucose at the biosensor occurred at low potential below 200 mV, avoiding the interference of the main interfering substances in real samples containing a 5-times higher concentration of L-cysteine, ascorbic acid, and uric acid. The biosensor showed fast response for glucose. A broad linear range of glucose concentration from 1.0 × 10−5 to 2.90 × 10−3 M was obtained and the detection limit was 2.2 × 10−6 M.
A sensitive non-enzyme hydrogen peroxide (H2O2) sensor has been prepared based on Fe3O4/reduced graphene oxide (Fe3O4/RGO) nanocomposite material. The sensitivity of Fe3O4/RGO modified electrode toward the electrochemical reduction of H2O2 is higher than that of Fe3O4 or Fe3O4/GO modified electrodes. A linear range of H2O2 concentration is obtained from 5.0 × 10−7 to 3.0 × 10−3 M with a detection limit of 1.8 × 10−7 M (S/N=3). The Fe3O4/RGO modified electrode also exhibits high selectivity and stability in the detection of H2O2, which suggests that Fe3O4/RGO nanocomposite material provides a promising platform for the non-enzyme electrochemical sensor.
29 February 2008 in Electrochemistry Communications