Water electrolysis is a promising approach to hydrogen production from renewable energy sources. Alkaline water electrolyzers allow using non-noble and low-cost materials. An analysis of common assumptions and experimental conditions (low concentrations, low temperature, low current densities, and short-term experiments) found in the literature is reported. The steps to estimate the reaction overpotentials for hydrogen and oxygen reactions are reported and discussed. The results of some of the most investigated electrocatalysts, namely from the iron group elements (iron, nickel, and cobalt) and chromium are reported. Past findings and recent progress in the development of efficient anode and cathode materials appropriate for large-scale water electrolysis are presented. The experimental work is done involving the direct-current electrolysis of highly concentrated potassium hydroxide solutions at temperatures between 30 and 100 °C, which are closer to industrial applications than what is usually found in literature. Stable cell components and a good performance was achieved using Raney nickel as a cathode and stainless steel 316L as an anode by means of a monopolar cell at 75 °C, which ran for one month at 300 mA cm−2. Finally, the proposed catalysts showed a total kinetic overpotential of about 550 mV at 75 °C and 1 A cm−2.
For wearable electronics, radial scalability is one of the key research areas for fibrous energy storage devices to be commercialized, but this field has been shelved for years due to the lack of effective methods and configuration arrangements. Here, the team presents a generalizable strategy to realize radial scalability by applying a synchronous-twisting method (STM) for synthesizing a coaxial-extensible configuration (CEC). As examples, aqueous fiber-shaped Zn-MnO 2 batteries and MoS 2 -MnO 2 supercapacitors with a diameter of ~500 μm and a length of 100 cm were made. Because of the radial scalability, uniform current distribution, and stable binding force in CEC, the devices not only have high energy densities (~316 Wh liter −1 for Zn-MnO 2 batteries and ~107 Wh liter −1 for MoS 2 -MnO 2 supercapacitors) but also maintain a stable operational state in textiles when external bending and tensile forces were applied. The fabricating method together with the radial scalability of the devices provides a reference for future fiber-shaped energy storage devices.
25 January 2018 in Journal of the Electrochemical Society
This work presents numerical simulations, with validation considering analytical expressions and experimental results, of mass-transfer in electrochemical reactors under laminar and turbulent flows in ducts of rectangular and tubular shape. Sudden expansion at the reactor inlet and segmented electrodes are also analyzed. Computational fluid dynamics (CFD) simulations were performed solving the laminar or RANS equations with the Shear Stress Transport (SST) k-ω turbulence model using the open source code OpenFOAM in steady-state. For mass-transfer simulations, the averaged diffusion-convection equation was implemented and solved. A good agreement between mass-transfer simulations with experimental data and analytical results were attained for both laminar and turbulent flow. Discussions about the segmented electrode technique in order to obtain local mass-transfer data in laminar and turbulent flow are also performed.
The MnO 4− /MnO 42− redox couple has a positive redox potential, high electrochemical reversibility and high solubility, up to 3.62 M at room temperature.
1 July 2019 in International Journal of Heat and Mass Transfer