The electrocaloric effect (ECE), i.e., the conversion of electric energy into heat, is of great importance for application in new generation cooling or heating devices that would be friendlier to the environment. Here, utilizing direct measurements of the ECE change of the temperature ΔT via a high resolution calorimeter, we study the ECE as a function of the magnitude of the electric-field step E in the vicinity of the critical point in several bulk relaxor ferroelectric ceramic systems. Relatively large ΔT of ∼2 to 3 K were obtained at modest fields of 90 kV/cm, even in the case of ceramic materials. The effective responsivity ΔT/E as a function of the electric field shows a characteristic peak near the critical point, which demonstrates the importance of proximity to the critical point for the enhancement of the electrocaloric effect. Experimental results are in good agreement with the theoretical calculations based on the spherical random-bond random-field model.
The electrocaloric effect (ECE), i.e., the conversion of the electric into the thermal energy has recently become of great importance for development of a new generation of cooling technologies. Here, we explore utilization of [Pb(Mg1∕3Nb2∕3)O3]0.9[PbTiO3]0.1 (PMN-10PT) relaxor ceramics as active elements of the heat regenerator in an ECE cooling device. We show that the PMN-10PT relaxor ceramic exhibits a relatively large electrocaloric change of temperature ΔTEC > 1 K at room temperature. The experimental testing of the cooling device demonstrates the efficient regeneration and establishment of the temperature span between the hot and the cold sides of the regenerator, exceeding several times the ΔTEC within a single PMN-10PT ceramic plate.
1 December 2014 in Journal of the European Ceramic Society
The giant electrocaloric (EC) effect is of great importance for application in cooling or heating devices of new generation, which would be friendlier for environment. Recent predictions of the existence of the giant EC effect in polymeric and inorganic ferroelectric relaxors are based solely on the indirect measurements of the electric polarization and not on a direct measurement of the EC effect itself. Here a method and analysis of direct measurements of the giant EC effect in various soft and solid ferroelectric materials in the form of thick and thin films is presented. The field dependence of the EC effect is shown for PbMg1/3Nb2/3O3 (PMN) ceramics and P(VDF-TrFE) (68/32 mol%) copolymers.