Power conversion efficiencies (PCEs) of state-of-the-art polymer solar cells (PSCs) have been promoted to over 9%. However, halogenated solvents like chlorobenzene (CB), o-dichlorobenzene (DCB), 1,8-diiodooctane (DIO) or their mixtures are still predominately used in the fabrication of these high performance PSCs. With the rapid progress in PCEs, removing the halogenated solvents from the fabrication processes of PSCs becomes an urgent task for the practical utilization of PSC technology. In this study, a halogen-free solvent system consisting of o-xylene (XY) and N-methylpyrrolidone (NMP) was successfully applied in the fabrication of the PSCs based on a variety of highly efficient polymers including PBDT-TS1 and other eight types of photovoltaic polymers. Notably, utilizing an XY–2% NMP mixture as a processing solvent, the PBDT-TS1/PC71BM-based PSC realized a PCE of 9.47%, which has been the highest value in halogen-free solvent processed PSCs until now. The photovoltaic properties and nanoscale morphology clearly indicated that the halogen-free solvent system featuring the XY–NMP mixture can replace the role of the widely utilized halogenated solvents in fabricating environmentally friendly PSCs with high efficiency.
1 June 2021 in Photodiagnosis and Photodynamic Therapy
Interfacial buffer layers often attribute the improved device performance in organic optoelectronic device. Herein, a water-soluble hydrochloric acid doped polyanilines (HAPAN) were utilized as p-type electrode buffer layer in highly efficient polymer solar cells (PSC) based on PBDTTT-EFT and several representative polymers. The PBDTTT-EFT-based conventional PSC featuring ultrathin HAPAN (1.3[emsp14]nm) delivered high PCE approximately 9%, which is one of the highest values among conventional PSC devices. Moreover, ultrathin HAPAN also exhibited wide applicability in a variety of efficient photovoltaic polymers including PBDTTT-C-T, PTB7, PBDTBDD, PBTTDPP-T, PDPP3T and P3HT. The excellent performances were originated from the high transparency, small film roughness and suitable work function.
9 September 2015 in Journal of Materials Chemistry C
Dopant-free poly[(4,8-bis-(2-ethylhexyloxy)-benzo[1,2-b;4,5-b′]dithiophene)-2,6-diyl-alt-(4-(2-ethylhexanoyl)-thieno[3,4-b] thiophene)-2,6-diyl] (PBDTTT-C) polymer is used as hole transporting material (HTM) in electron transporting material (ETM) free planar perovskite solar cells (PSCs). The devices with a PBDTTT-C HTM show higher power conversion efficiency (PCE = 9.95%) than the devices with a P3HT HTM (PCE = 6.17%) with enhanced short circuit current density (Jsc), open circuit voltage (Voc) and fill factor (FF) in a simple device configuration (ITO/CH3NH3PbI3/PBDTTT-C/MoO3/Ag), due to the suitable energy level, better carrier mobility and lower interfacial charge recombination.
11 August 2015 in Journal of Materials Chemistry C
In this contribution, a novel cathode interlayer material (NDIO) based on naphthalene diimide was successfully prepared by a facile two-step reaction from commercially available compounds. NDIO exhibited excellent water solubility, high transparency in the visible light region, and well-matched molecular energy levels. By incorporating this novel water processed cathode interlayer, a high power conversion efficiency of 9.51% was recorded in PBDT-TS1/PC71BM-based polymer photovoltaic cells (PPCs), and the value is nearly 2-fold the device efficiency of PPCs without the cathode interlayer. More importantly, the insertion of the NDIO interlayer promotes the device efficiency of polymer/polymer photovoltaic cells based on PBDTTT-EFT/N2200 from 3.23% up to 5.77%. The successful applications in both polymer/PCBM and polymer/polymer blend-based inverted PPCs make NDIO a promising cathode interlayer for realizing aqueous processed polymer photovoltaic cells with high performance.