On May 2018 the world’s first dual-frequency Global Navigation Satellite System (GNSS) smartphone produced by Xiaomi equipped with a Broadcom BCM47755 chip was launched. It is able to receive L1/E1/ and L5/E5 signals from GPS, Galileo, Beidou, and GLONASS (GLObal NAvigation Satellite System) satellites. The main aim of this work is to achieve the phone’s position by using multi-constellation, dual frequency pseudorange and carrier phase raw data collected from the smartphone. Furthermore, the availability of dual frequency raw data allows to assess the multipath performance of the device. The smartphone’s performance is compared with that of a geodetic receiver. The experiments were conducted in two different scenarios to test the smartphone under different multipath conditions. Smartphone measurements showed a lower C/N0 and higher multipath compared with those of the geodetic receiver. This produced negative effects on single-point positioning as showed by high root mean square error (RMS). The best positioning accuracy for single point was obtained with the E5 measurements with a DRMS (horizontal root mean square error) of 4.57 m. For E1/L1 frequency, the 2DRMS was 5.36 m. However, the Xiaomi Mi 8, thanks to the absence of the duty cycle, provided carrier phase measurements used for a static single frequency relative positioning with an achieved 2DRMS of 1.02 and 1.95 m in low and high multipath sites, respectively.
GNSS has become ubiquitous in high-precision applications, although the cost of high-end GNSS receivers remains a major obstacle for many applications. Recent advances in GNSS receiver technology have led to the development of low-cost GNSS receivers, making high-precision positioning available to a wider range of users. One such technique for achieving high-precision positioning is Precise Point Positioning-Real Time Kinematic (PPP-RTK). It is a GNSS processing technique that combines the PPP and RTK approaches to provide high-precision positioning in real time without the need for a base station. In this work, we aim to assess the performance of the low-cost u-blox ZED-F9P GNSS module in PPP-RTK mode using the low-cost u-blox ANN-MB antenna. The experiment was designed to investigate both the time it takes the receiver to resolve the phase ambiguity and to determine the positioning accuracies achievable. Results showed that the u-blox ZED-F9P GNSS module could achieve centimeter-level positioning accuracy in about 60 s in PPP-RTK mode. These results make the PPP-RTK technique a good candidate to fulfill the demand for mass-market accurate and robust navigation since uses satellite-based corrections to provide accurate positioning information without the need for a local base station or network. Furthermore, due to its rapid acquisition capabilities and accurate data georeferencing, the technique has the potential to serve as a valuable method to improve the accuracy of the three-S techniques (GIS, remote sensing, and GPS/GNSS).
The integration of Global Navigation Satellite Systems (GNSS) with Inertial Navigation Systems (INS) has been very actively researched for many years due to the complementary nature of the two systems. In particular, during the last few years the integration with micro-electromechanical system (MEMS) inertial measurement units (IMUs) has been investigated. In fact, recent advances in MEMS technology have made possible the development of a new generation of low cost inertial sensors characterized by small size and light weight, which represents an attractive option for mass-market applications such as vehicular and pedestrian navigation. However, whereas there has been much interest in the integration of GPS with a MEMS-based INS, few research studies have been conducted on expanding this application to the revitalized GLONASS system. This paper looks at the benefits of adding GLONASS to existing GPS/INS(MEMS) systems using loose and tight integration strategies. The relative benefits of various constraints are also assessed. Results show that when satellite visibility is poor (approximately 50% solution availability) the benefits of GLONASS are only seen with tight integration algorithms. For more benign environments, a loosely coupled GPS/GLONASS/INS system offers performance comparable to that of a tightly coupled GPS/INS system, but with reduced complexity and development time.
The new generation of Android smartphones is equipped with GNSS chips capable of tracking multi-frequency and multi-constellation data. In this work, we evaluate the positioning performance and analyze the quality of observations collected by three recent smartphones, namely Xiaomi Mi 8, Xiaomi Mi 9, and Huawei P30 pro that take advantage of such chips. The analysis of the GNSS observation quality implies that the commonly employed elevation-dependent function is not optimal for smartphone GNSS observation weighting and suggests an application of the -dependent one. Regarding smartphone code signals on L5 and E5a frequency bands, we found that they are characterized with noticeably lower noise as compared to E1 and L1 ones. The single point positioning results confirm an improvement in the performance when the weights are a function of the -rather than those dependent on the satellite elevation and that a smartphone positioning with E5a code observations significantly outperforms that with E1 signals. The latter is expressed by a drop of the horizontal RMS from 8.44 m to 3.17 m for Galileo E1 and E5a solutions of Xiaomi Mi 9 P30, respectively. The best positioning accuracy of multi-GNSS single-frequency (L1/E1/B1/G1) solution was obtained by Huawei P30 with a horizontal RMS of 3.24 m. Xiaomi Mi 8 and Xiaomi Mi 9 show a horizontal RMS error of 4.14 m and 4.90 m, respectively.
Terrestrial ecosystems play a crucial role in global carbon cycling by sequestering carbon from the atmosphere and storing it primarily in living biomass and soil. Monitoring terrestrial carbon stocks is essential for understanding the impacts of changes in land use on carbon sequestration. This study investigates the potential of remote sensing techniques and the Google Earth Engine to map and monitor changes in the forests of Calabria (Italy) over the past two decades. Using satellite-sourced Corine land cover datasets and the InVEST model, changes in Land Use Land Cover (LULC), and carbon concentrations are analyzed, providing insights into the carbon dynamics of the region. Furthermore, cellular automata and Markov chain techniques are used to simulate the future spatial and temporal dynamics of LULC. The results reveal notable fluctuations in LULC; specifically, settlement and bare land have expanded at the expense of forested and grassland areas. These land use and land cover changes significantly declined the overall carbon stocks in Calabria between 2000 and 2024, resulting in notable economic impacts. The region experienced periods of both decline and growth in carbon concentration, with overall losses resulting in economic impacts up to EUR 357.57 million and carbon losses equivalent to 6,558,069.68 Mg of CO emissions during periods of decline. Conversely, during periods of carbon gain, the economic benefit reached EUR 41.26 million, with sequestered carbon equivalent to 756,919.47 Mg of CO emissions. This research aims to highlight the critical role of satellite data in enhancing our understanding and development of comprehensive strategies for managing carbon stocks in terrestrial ecosystems.
In recent years, the performance of free-and-open-source software (FOSS) for image processing has significantly increased. This trend, as well as technological advancements in the unmanned aerial vehicle (UAV) industry, have opened blue skies for both researchers and surveyors. In this study, we aimed to assess the quality of the sparse point cloud obtained with a consumer UAV and a FOSS. To achieve this goal, we also process the same image dataset with a commercial software package using its results as a term of comparison. Various analyses were conducted, such as the image residuals analysis, the statistical analysis of GCPs and CPs errors, the relative accuracy assessment, and the Cloud-to-Cloud distance comparison. A support survey was conducted to measure 16 markers identified on the object. In particular, 12 of these were used as ground control points to scale the 3D model, while the remaining 4 were used as check points to assess the quality of the scaling procedure by examining the residuals. Results indicate that the sparse clouds obtained are comparable. MicMac® has mean image residuals equal to 0.770 pixels while for Metashape® is 0.735 pixels. In addition, the 3D errors on control points are similar: the mean 3D error for MicMac® is equal to 0.037 m with a standard deviation of 0.017 m, whereas for Metashape®, it is 0.031 m with a standard deviation equal to 0.015 m. The present work represents a preliminary study: a comparison between software packages is something hard to achieve, given the secrecy of the commercial software and the theoretical differences between the approaches. This case study analyzes an object with extremely complex geometry; it is placed in an urban canyon where the GNSS support can not be exploited. In addition, the scenario changes continuously due to the vehicular traffic.