Resonant power conversion leads to advantages such as soft switching and high frequency operation, however, analysis and design of a resonant converter require an efficient methodology. In general, conventional methodologies use a design-oriented architecture, which requires previously specifications and iterative circuit-level simulations. This procedure is the simplest; notwithstanding, it can be time-consuming and inaccurate for more complex systems, as resonant converters. This paper proposes a result-oriented architecture that is independent of specifications, in other words, real circuit parameters are waived in exchange for generalized results. A normalization procedure is proposed by using an equivalence transformation to modeling the system with a state vector composed by terms as the square roots of the stored energy in the reactive components. The system is represented in a dimensionless state-space model, in which the terms of the state-space matrices are composed by resonant parameters, such as, normalized resonant frequencies and quality factor, thereby, the system is independent of circuit parameters, like as, inductances, capacitances and resistances. The sixth order hybrid Ćuk converter is used to derivate the equations. Simulation results and an implementation of a 500 kHz hybrid buck converter is shown to compare theoretical, simulation and experimental results.
18 August 2021 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Contactless energy transfer systems are mainly divided into acoustic, inductive, capacitive, and optical, in which main applications are related to biomedical, wireless chargers, and sensors in metal enclosures. When solids are used as transfer media, ultrasound transducers based on piezoelectricity can be used for through-wall power transfer, which can be named as an electro-mechanical-acoustic contactless energy transfer system. This work presents a state-space model derived from a multiphysics network that includes all the multiphysical power conversion without separating the stages and including the real physical elements, like as the piezoelectric parameters and the geometry of the transfer media. The model is compared to the experimental response of the system and evaluated for different scenarios regarding transducers types and solid transfer media. An error analysis has shown that the maximum quadratic error between theoretical and experimental responses is 3.7%.
25 June 2019 in Journal of Microelectromechanical Systems
Electronic devices in automotive area have been used on large scale and a control unit is mandatory for greater engine efficiency. By performing the spark advance and injection timing correctly in internal-combustion engines, an engine control unit improves drivability and helps to reduce fuel consumption. This paper presents an automotive engine control unit development considering the architecture of tasks. Flowcharts for the algorithms are proposed. The results can be used for an electronic control unit firmware development, also, experimental results using a microcontroller and a JimStim board are presented to validate the theoretical approach.
This paper introduces the exact solution of the Class-E WPT resonant inverter. Dominantly, the DC-AC inverters for WPT systems are analyzed by assuming a sinusoid waveform for the output variables. However, by allowing waveform light distortions, the magnetic element values can be reduced; which is provided by the proposed method. It is shown that the circuit waveforms are composed of sine, cosine and exponential terms. The obtained solutions are used to design a 500 kHz Class-E WPT resonant inverter which operates with ZVS. The design is experimentally verified and 74 % efficiency with 9.7 W output power is achieved.
This paper deals with a circuit modeling approach based on a normalization procedure in order to represent the system considering resonant parameters instead of real circuit parameters. The main advantages are the attainment of generalized solutions that do not depend on specifications, which allows the design of the converter without resorting to circuit level simulations. In this work, the fundamentals and the mathematical formulation of the normalized analysis are described. Furthermore, a multi-stage Class D-E DC-DC resonant converter is analyzed without simplifying assumptions used in other methodologies, such as, high loaded quality factor and fundamental component approximation. Experimental results are shown to verify the theoretical approach.