The growing significance of superalloys like Hastelloy X, particularly in critical engineering sectors such as aerospace, chemical processing, and selective biomedical equipment (e.g., surgical instruments and medical tooling), underscores the need for advancements in their manufacturing processes. In today’s era of advanced manufacturing, it is crucial to develop machining systems that are both environmentally sustainable and cost-effective. To bridge the existing gap between economic, technological, and sustainability aspects in the machining of Hastelloy X, the present research aims to shed light on this critical interplay. Experimental investigations were conducted to evaluate the performance of various cooling techniques, including dry machining, minimum quantity lubrication (MQL), and cryogenic cooling using liquid nitrogen (LN₂) and carbon dioxide (CO₂). The results revealed that cryogenic cooling with LN₂ demonstrated superior performance across technological, sustainability, and economic metrics, outperforming other methods. Specifically, LN₂ cooling during the turning of Hastelloy X led to a reduction in tool wear and surface roughness by 21.11% and 25%, respectively, over dry machining conditions. These findings highlight the potential of advanced lubrication and cooling techniques to enhance sustainable manufacturing practices, reducing resource consumption while improving machining performance, particularly for industries involving difficult-to-machine superalloys.
Emission and combustion parameters of common rail direct injection combustion engine with different proportions of exhaust gas recirculation rate and long-carbon-chain alcohol blends on performance are the main motive of this research. To lessen the dependency on diesel fuel and reduce harmful emissions, 1-hexanol is used, as it has better fuel properties than small-carbon-chain alcohol, and it can be blended with diesel. In common rail direct injection combustion engine, research was conducted, in which fuel blends (1-hexanol-diesel) were variant, i.e., (10%, 20%, 30%) by volume whereas engine speed was fixed at 1500 rpm by varying the load at 25% step from 25-100%. Blends were examined with various exhaust gas recirculation rates (10% and 20%) to see what impact they have on engine properties. It was observed that the higher the proportion of 1-Hexanol, the lower the engine performance. The research revealed that for the blend D70H30, around 8.24% rise in brake specific fuel consumption, slight rise in hydrocarbon, 2.80% reduction in brake thermal efficiency, and 16.70% reduction in nitrogen oxides (NOx) emission. With 1-heaxnol-diesel blends, the engine is noted to function effortlessly, so as a substitute to the diesel upto 30% of the 1-hexanol can be used while increasing the total cost of implementation. Increase in hexanol and EGR percentage shown negative impact on the brake thermal efficiency, HC and CO emission however, NOx and CO2 emissions were found to be decreased.
14 December 2021 in Journal of Energy Resources Technology