An optical transmission system using Fiber Bragg Grating (FBG) and Erbium Doped Fiber Amplifier (EDFA) with new proposed model has been analyzed to overcome chromatic dispersion and attenuation phenomena. To evaluate the transmission system performance of the received signals, a simple model of one channel transmission has been developed in the first step. Also, optical fiber length and attenuation coefficient parameters have been investigated in detail to deal with the optimized corresponding parameter values. Results show that the performance of the optimized design parameters is very efficient in terms of output power (dBm), noise figure (dB), gain (dB), and Q-Factor. The model of one channel developed previously has been adapted to a complex model of four optical channels multiplexing with different wavelengths. FBG and EDFA have been also added to WDM technology system to enhance the chromatic dispersion and the signal attenuation. Results show that the new model is more efficient in terms of Q-Factor and eye diagrams.

This paper presents a detailed study of N-channels Wavelength Division Multiplexing (WDM) Optical transmission system using Radio over Fiber (RoF) technology. The study was applied to optical long-haul networks to overcome the nonlinearity effects, chromatic dispersion, and signal loss. For this purpose, Fiber Bragg Grating (FBG) has been implemented in 4-channels, 8-channels, and 16 channels WDM transmission system network at 10 Gb/s to compensate the dispersion and the nonlinear distortion. The use of erbium-doped fiber amplifiers (EDFA) has been also investigated to improve the quality of the transmission system. In Digital RoF, the impact analysis of modulation types such as Differential Phase-Shift Keying (DPSK) and Quadrature Amplitude Modulation (QAM) is also introduced. Constellation diagrams, received optical power, types of modulation, fiber dispersion, channel spacing variation, and laser power were considered to validate the study with the existing studies. All results achieve good reliability performance and prove the efficiency of the presented model.

In this paper, a new optical transmission model was investigated and developed in order to improve the performance of Wavelength Division Multiplexing optical transmission systems. For this purpose, an efficient theoretical method combining a Fiber Bragg Grating (FBG) and Erbium Doped Fiber Amplifier (EDFA) was implemented. Enhancements on the transmitted signal amplitudes with important compensation of the chromatic dispersions and large reduction on the nonlinear effects were obtained. The reflectivity peak, the full width at half maximum bandwidth, and the side lobe level have been studied in depth to demonstrate the efficiency of the proposed method. To apply the new method, we considered a complicated system of 16-channel wavelengths, where the split-step fourier method was used to solve the nonlinear Schrödinger equations, and the transfer matrix method was applied to describe the coupled mode equations. The wavelengths corresponding to different values of reflectivity peaks calculated previously in the FBG outputs section were injected as EDFA inputs to determine the output power and the gain of the new transmission system. All results are analyzed using Matlab program.