This paper addresses the problem of finding the optimal configuration (number, locations and sizes) of energy storage systems (ESS) in a radial low voltage distribution network with the aim of preventing over- and undervoltages. A heuristic strategy based on voltage sensitivity analysis is proposed to select the most effective locations in the network where to install a given number of ESS, while circumventing the combinatorial nature of the problem. For fixed ESS locations, the multiperiod optimal power flow framework is adopted to formulate the sizing problem, for whose solution convex relaxations based on semidefinite programming are exploited. Uncertainties in the storage sizing decision problem due to stochastic generation and demand, are accounted for by carrying out the optimal sizing over different realizations of the demand and generation profiles, and then taking a worst-case approach to select the ESS sizes. The final choice of the most suitable ESS configuration is done by minimizing a total cost, which takes into account the number of storage devices, their total installed capacity and average network losses. The proposed algorithm is extensively tested on 200 randomly generated radial networks, and successfully applied to a real Italian low voltage network and a modified version of the IEEE 34-bus test feeder.
Human motion models are finding an increasing number of novel applications in many different fields, such as building design, computer graphics and robot motion planning. The Social Force Model is one of the most popular alternatives to describe the motion of pedestrians. By resorting to a physical analogy, individuals are assimilated to point-wise particles subject to social forces which drive their dynamics. Such a model implicitly assumes that humans move isotropically. On the contrary, empirical evidence shows that people do have a preferred direction of motion, walking forward most of the time. Lateral motions are observed only in specific circumstances, such as when navigating in overcrowded environments or avoiding unexpected obstacles. In this paper, the Headed Social Force Model is introduced in order to improve the realism of the trajectories generated by the classical Social Force Model. The key feature of the proposed approach is the inclusion of the pedestrians’ heading into the dynamic model used to describe the motion of each individual. The force and torque representing the model inputs are computed as suitable functions of the force terms resulting from the traditional Social Force Model. Moreover, a new force contribution is introduced in order to model the behavior of people walking together as a single group. The proposed model features high versatility, being able to reproduce both the unicycle-like trajectories typical of people moving in open spaces and the point-wise motion patterns occurring in high density scenarios. Extensive numerical simulations show an increased regularity of the resulting trajectories and confirm a general improvement of the model realism.
The performance of two nonlinear estimators is compared for the localization of a spacecraft. It is assumed that range measurements are not available (as in deep space missions), and the localization problem is tackled on the basis of angles-only measurements. A dynamic model of the spacecraft accounting for several perturbing effects, such as Earth and Moon gravitational field asymmetry and errors associated with the Moon ephemerides, is employed. The measurement process is based on elevation and azimuth of Moon and Earth with respect to the spacecraft reference system. Position and velocity of the spacecraft are estimated using both the extended Kalman filter (EKF) and the unscented Kalman filter (UKF). The behavior of the filters is compared on two sample missions: Earth-to-Moon transfer and geostationary orbit raising.
This paper presents an algorithm for solving the simultaneous localization and map building (SLAM) problem, a key issue for autonomous navigation in unknown environments. The considered scenario is that of a mobile robot using range scans, provided by a 2D laser rangefinder, to update a map of the environment and simultaneously estimate its position and orientation within the map. The environment representation is based on linear features whose parameters are extracted from range scans, while the corresponding covariance matrices are computed from the statistical properties of the raw data. Simultaneous update of robot pose and linear feature estimates is performed via extended Kalman filtering. Experimental tests performed within a real-world indoor environment demonstrate the effectiveness of the proposed SLAM technique.