Tyler N. Tallman

Tyler N. Tallman


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2020 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
TTTyler N. Tallman
Tyler N. Tallman
DSDanny J Smyl
Danny J Smyl
Much recent work has been devoted to utilizing changes in either the inherent or imparted electrical conductivity of self-sensing materials as an indicator of damage, deformation or strain, pressure, or general condition (e.g. moisture content, UV exposure, pH, etc). The scope of self-sensing materials is quite large and includes polymeric composites, cementitious and ceramic materials, specialized fabrics, and sensing skins or paints applied to materials which otherwise cannot be made to be self-sensing. Beyond just utilizing conductivity changes for mere detection, spatial localization and artifact shaping is highly desirable. For this, electrical impedance tomography (EIT) has received much attention (also referred to as electrical resistance tomography, ERT). Because of the diversity of materials which exhibit conductivity-based self-sensing, EIT has broad, far-reaching potential in areas such as structural health monitoring (SHM) and nondestructive evaluation (NDE), human-to-robot interactions and interfacing, and even biomedical implants, prosthetic devices, and human health monitoring via wearable sensor technology. Historically, EIT was developed for biomedical imaging and geophysical prospection—vast literature exists in these areas. However, new applications of EIT in conjunction with stimulus-responsive conductivity in engineered materials poses new challenges and new opportunities not seen in biomedical and geophysical applications. Therefore, a comprehensive review of EIT as it has been applied for damage, deformation or strain, pressure, and condition monitoring is herein presented in order to provide the reader with a perspective of results to date, best practices, and a road map for future development of this exciting technology.

11 April 2022 in Composites Science and Technology
Verified
Journal Article
Closed access
MSMonica Sannamani
Monica Sannamani
JGJinling Gao
Jinling Gao
WCWeinong W. Chen
Weinong W. Chen
TTTyler N. Tallman
Tyler N. Tallman

17 March 2016 in Structural Health Monitoring
Verified
Journal Article
Closed access
TTTyler N. Tallman
Tyler N. Tallman
KWK. W. Wang
K. W. Wang
Tomographic methods such as electrical impedance tomography have tremendous potential for electrical conductivity-based structural health monitoring, damage identification, strain sensing, and environmental/corrosion sensing as evidenced by a growing body of literature employing electrical impedance tomography. However, electrical impedance tomography also has important limitations preventing its widespread acceptance such as requiring burdensome computational resources not available to on-board structural health monitoring and often difficult to obtain initial estimates of conductivity distributions. We herein overcome these limitations by developing a novel electrical impedance tomography reconstruction algorithm with substantially abated computational requirements and independent of initial estimates. This method is predicated on the difference between two sets of observed voltages being due to a difference in resistivity that is constrained to be a summation of two-dimensional sine waves. This method is first explored analytically and then demonstrated experimentally on three different materials. This approach is an important advancement to the state of the art because it overcomes critical limitations of electrical impedance tomography thereby substantially facilitating the viability of electrical impedance tomography for real structural health monitoring applications.

13 January 2020 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
PDF file
TTTyler N. Tallman
Tyler N. Tallman
HHHashim Hassan
Hashim Hassan
Carbon nanofiller–modified polymers have been the subject of intense study for years due to their potential use in diverse and far-reaching applications. The effect of nanofiller network parameters on macroscale direct current electrical transport has been thoroughly elucidated by extensive nano-to-microscale modeling. As a result, we now have great insight into how the conductive and piezoresistive properties of nanocomposites can be tailored through judicious control of the underlying nanofiller network. It is also well-known that carbon nanofiller–modified polymers possess frequency-dependent alternating current electrical properties. Even though work has been done to understand the alternating current properties of nanocomposites via experimental characterization and through the development of macroscale equivalent circuit models, much less has been done to understand how macroscale alternating current conductivity depends on microscale effects such as nanofiller alignment and aspect ratio. This is an important knowledge gap because, like direct current conductivity, the underlying nanofiller network ultimately gives rise to macroscale alternating current transport in these materials. To this end, we herein present an alternating current microscale percolation model for carbon filler–based polymer nanocomposites. After calibration against experimental complex impedance data from randomly ordered carbon nanofiber–modified epoxy, this model is used to explore the effect of carbon nanofiber alignment and aspect ratio on alternating current conductivity. These simulations show that alternating current conductivity generally increases with increasing alignment and with aspect ratio; however, the competing effects of alternating current and direct current percolation give rise to substantial variation in alternating current conductivity at low frequencies and with poor percolation. The methodology presented in this article provides a modeling tool by which nanocomposites with highly optimized alternating current properties can be developed through careful control and tailoring of nanofiller network properties for the realization of exotic, next-generation material functionality.

13 July 2020 in Smart Materials and Structures
Verified
Journal Article
Closed access
HGH Ghaednia
H Ghaednia
COC E Owens
C E Owens
RRR Roberts
R Roberts
TTTyler N. Tallman
Tyler N. Tallman
AHA J Hart
A J Hart
KVK M Varadarajan
K M Varadarajan
Aseptic loosening, or loss of implant fixation, is a common complication following total joint replacement. Revision surgeries cost the healthcare system over $8 billion annually in the United States. Despite the prevalence of aseptic loosening, timely and accurate detection remains a challenge because traditional imaging modalities, such as plain radiographs, struggle to reliably detect the early stages of implant loosening. Motivated by this challenge, we present a novel approach for in vivo monitoring and failure detection of cemented joint replacements. Poly(methyl methacrylate) (PMMA) bone cement is modified with low volume fractions of chopped carbon fiber (CF) to impart piezoresistive-based self-sensing. Electrical impedance tomography (EIT) is then used to detect and monitor load-induced deformation and fracture of CF/PMMA in a phantom tank. We therefore show that EIT indeed is able to detect loading force on a prosthetic surrogate, distinguish between increasing load magnitudes, detect failure of implant fixation, and even distinguish between cement cracking and cement de-bonding without direct contact to the surrogate. Because EIT is a low-cost, physiologically benign, and potentially real-time imaging modality, the feasibility study herein presented could positively impact orthopedic researchers by providing, via in vivo monitoring, insight into the factors that initiate aseptic loosening.

3 March 2021 in IEEE Signal Processing Letters
Verified
Journal Article
Open access
DSDanny Smyl
Danny Smyl
TTTyler N. Tallman
Tyler N. Tallman
DLDong Liu
Dong Liu
AHAndreas Hauptmann
Andreas Hauptmann
Solving complex optimization problems in engineering and the physical sciences requires repetitive computation of multi-dimensional function derivatives, which commonly require computationally-demanding numerical differentiation such as perturbation techniques. In particular, Gauss-Newton methods are used for nonlinear inverse problems that require iterative updates to be computed from the Jacobian and allow for flexible incorporation of prior knowledge. Computationally more efficient alternatives are Quasi-Newton methods, where the repeated computation of the Jacobian is replaced by an approximate update, but unfortunately are often too restrictive for highly ill-posed problems. To overcome this limitation, we present a highly efficient data-driven Quasi-Newton method applicable to nonlinear inverse problems, by using the singular value decomposition and learning a mapping from model outputs to the singular values to compute the updated Jacobian. Enabling time-critical applications and allowing for flexible incorporation of prior knowledge necessary to solve ill-posed problems. We present results for the highly non-linear inverse problem of electrical impedance tomography with experimental data.