Nanoscale surface morphology of plant fibers has important implications for the interfacial bonding in fiber-polymer composites. In this study, we investigated and quantified the effect of plasma-surface modification on ramie plant fibers as a potential tool for simple and efficient surface modification. The extensive investigation of the effects of plasma treatment of the fiber surface nano-morphology and its effect on the fiber-polymer interface was performed by Low-Voltages Scanning Electron Microscopy (LV-SEM), infrared spectroscopy (FT-IR) analysis, fiber-resin angle measurements and mechanical (tensile) testing. The LV-SEM imaging of uncoated plasma treated fibers reveals nanostructures such as microfibrils and elementary fibrils and their importance for fiber mechanical properties, fiber wettability, and fiber-polymer matrix interlocking which all peak at short plasma treatment times. Thus, such treatment can be an effective in modifying the fiber surface characteristics and fiber-polymer matrix interlocking favorably for composite applications.

Polymeric and plastic materials currently have numerous positive impacts due to their unique properties that make them important for various engineering applications. However, sustainability is a vital factor that should be considered, because of environmental issues. Eggshells (ES) are an important way to reduce the impact of nondegradable materials when applied to reinforce different types of polymer matrices, whether natural or synthetic polymers. Therefore, this study is an attempt to explore the potential application of waste eggshell fillers for the first time as a natural reinforcement in polyamide 12 (PA) composites. PA was loaded with three different ratios (3, 5, and 10 wt. %) of eggshell powder. Morphological studies of the PA powder, ES powder, and their composites were carried out by scanning electron microscopy (SEM). Furthermore, differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy were performed to study the thermal and chemical properties of the raw materials and the produced composites. The results indicate ES fillers’ potential usage as a reinforcement material to develop the thermal and chemical properties of the PA polymer matrix composites, thereby reducing costs and minimizing the environmental pollution caused by waste eggshells and petroleum-based polymers.

Phenolics are widely used for over a century in different industries due to their chemical resistance and thermomechanical properties. However, the presence of voids in phenolic resins has negative effects on the mechanical properties and a conventional approach is to avoid these by utilizing very long cure cycles. Our alternative approach investigates the tailoring of void size and distribution to achieve a better balance between processing time and mechanical properties. Therefore, we produced phenolic resin with a void‐free microstructure by a long cure cycle as a reference. To alter the void size and distributions, we utilized different catalysts and a short cure cycle to obtain phenolic resins and test their flexural properties with respect to the reference. We investigated the fracture surfaces of all materials by SEM, FTIR and compared results to finite element modeling that confirmed the effects of different void size and distributions on the mechanical properties. © 2019 The Authors. Journal of Applied Polymer Science published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48249.

Natural fiber–reinforced polymer composites offer many advantages over conventional composite materials, such as availability, low cost, inexpensive, lightweight, and high specific mechanical properties. However, the applications of these materials are still limited due to the challenges in achieving a good interface between the fibers and matrix. This is highly influenced by the fiber surface characteristics and the polymer matrix properties. Therefore, in this study, the surface characteristics of ramie fibers were modified using low-pressure plasma treatment in order to improve their interface to the phenolic resin. Furthermore, the effects of using two different curing cycles (acid cure and thermal cure) on the properties of short ramie fiber-phenolic composites were also investigated. A new method for making mats of random short ramie fibers was developed and used for the fabrication of composites containing plasma-treated fibers. The flexural properties of all composites were tested and the obtained fracture surfaces were investigated using LV-SEM. The results indicate that both plasma treatment and cure cycle conditions influence the fiber–matrix interface and consequently the flexural properties of the composites.