In this paper, the free-vibration behavior of viscoelastic nano-scaled beams is studied via the finite element (FE) method by implementing the principle of total potential energy and nonlocal integral theory. The formulations are derived based on the Kelvin–Voigt viscoelastic model and Euler–Bernoulli beam theory considering the nonlocal integral theory. The eigenvalue problem of the free vibration is extracted by employing the variational relations. To the best of the authors knowledge it is the first time that the viscoelastic characteristics are implemented in the nonlocal integral FE method to study mechanical behavior of nano-scaled beams. Various boundary conditions can be properly modeled by the current method. Numerical results are compared with literature in order to validate the proposed approach. Then, the effects of nonlocal parameter, viscoelastic parameter, geometrical parameters and different boundary conditions on the complex natural frequencies of the nano-scaled Euler– Bernoulli beams are studied.
6 May 2020 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
A regional, turbofan-powered, 72-passenger, transport aircraft with very high aspect ratio truss-braced wings is developed with an affordable methodology from an existing 52 passenger, conventional twin-turboprop aircraft. At first, the ration behind the selection of the truss-braced wing configuration is discussed. Next, the methodologies for the sizing, weight, aerodynamics, performance, and cost analysis are presented and validated against existing regional aircraft. The variant configurations and their design features are then discussed. Finally, sensitivity analysis is carried out to investigate the effects of the wing aspect ratio and engine bypass ratio on the aircraft weight, aerodynamics, and cost. It has been found that the penalties associated with the wing weight will prevent the acceptable realization of the high aspect ratio wing benefits, but when it is combined with the very high bypass ratio engines, a 17% reduction in the mission fuel weight is achieved. In contrast, the cost analysis has revealed that the application of higher aspect ratio wings in the truss-braced wing configuration may increase the development and maintenance costs. Consequently, with aspect ratios higher than 24, eventually, these costs may outperform the associated fuel cost reductions.
1 December 2005 in International Journal of Mechanical Sciences