A planar waveguide laser operating in a negative branch unstable resonator is Q-switched by an acoustooptic modulator in a new configuration, providing effective, high-speed switching. The laser using a 200-mum Nd:YAG core, face pumped by 10 laser diode bars, has produced 100-W output in a good beam quality at 100-kHz pulse rate, and 4.5 mJ at lower frequency with 15-ns pulse duration.
Dual-frequency terahertz radiation from air-plasma filaments produced with two-color lasers in air has been demonstrated experimentally. When a focusing lens is tilted for a few degrees, it is shown that the laser filament evolves from a single one to two sub-filaments. Two independent terahertz sources emitted from the sub-filaments with different frequencies and polarizations are identified, where the frequency of terahertz waves from the trailing sub-filament is higher than that from the leading sub-filament.
Under the pump of a diode laser at 790 nm, self-pulsing phenomena of ~2 μm Tm3+-doped fiber lasers are investigated. Laser cavity configuration is changed by using different output-coupling mirrors. When the polished fiber-end (Fresnel reflection) is used as the output coupler, the cavity is dubbed as "bad" cavity. With this "bad" cavity, regular laser pulse trains can be obtained near threshold pump level. The pulse width and repetition rate are several micro seconds and several kilohertz, respectively. At higher pump levels, the regular pulse-train shape is broken, and some random pulses occur. At the same time, similar mode-locking phenomenon can be observed. When the output coupler is changed to a T=10% (at 2μm) mirror, regular laser pulse train still can be observed near threshold pump. However, a slight increase of pump leads to randomization of the pulse train. Similar mode-locking phenomenon was not observed with this kind of cavity. When the output coupling is decreased to T=5%, even near the pump threshold, regular pulse train can not be achieved. With increased pump powers, laser output changes from pulse state to continuous wave. Based on the experimental results, a theoretical model is proposed and the origin of self-pulsing is discussed.
24 September 2021 in IEEE Canadian Journal of Electrical and Computer Engineering
Radar-embedded communication (REC) systems use a series of radar echoes as a mask to send covert communication signals. In this article, we consider a multiapproach method to improve the reliability of the message reception process in REC systems. First, a match-after-filtering strategy is proposed to improve the overall reliability of message reception. Theoretical analysis and simulation results show that, compared with traditional receiving methods, this strategy can dramatically improve the reliability of message reception. Second, precise radar waveform extraction is necessary for communication waveform construction. To precisely extract the radar waveform at the radio frequency tag, we propose an extraction technique using array processing. Finally, in many REC systems, smooth multiple signal classification algorithms and reiterative super-resolution (RISR) algorithms are used for the direction of arrival (DOA) estimation. We develop an improved RISR algorithm, based on a least squares model, to improve DOA estimation accuracy without increasing the complexity.
This paper focuses on the waveform design for a radar-embedded communication (REC) system which can achieve covert communication while improving the spectrum utilization. In order to solve the problem that the conventional embedded communication waveforms are not orthogonal, this paper proposes the orthogonal weighted-combining (OWC) strategy and the orthogonal dominant-projection (ODP) strategy. Furthermore, the OWC strategy can be broken into two strategies: constrained weighted-combining (CWC) strategy and improved weighted-combining (IWC) strategy. Theoretical analysis and simulation results have shown that these three strategies can dramatically improve communication reliability. Moreover, the performance of the strategies mentioned above has been assessed by the low probability of intercept (LPI) metric. Comparing to the traditional strategies, the IWC strategy shows better LPI performance while the CWC strategy and ODP strategy remain unchanged. Additionally, the ODP strategy can also reduce computational complexity and response delay, which is rather important in the REC system. Any of the three strategies can be selected in accordance with the needs of the application scenario.
As a new competitive technology, radar-embedded communication (REC) can achieve the covert communication while improving the spectrum utilization. The embedded communication waveform has always been the core of REC. Traditional waveform design methods use eigen-decomposition to construct REC waveforms after converting research targets. However, the constructed REC waveforms are not orthogonal, which would reduce the communication reliability. Besides, converting targets would affect the low probability of detection (LPD) performance of REC. To solve these problems, this paper proposes a new waveform design method based on singular value decomposition (SVD). We compare the proposed method with the traditional ones in terms of communication reliability, LPD performance and robustness. Analysis and simulation results show that the SVD waveform generated by the proposed method is better than the traditional REC waveforms. We also provide a method to measure the level of similarity between SVD waveform and radar waveform. Then we can adjust the similarity to control the trade-off between reliability and concealment.