A 32-bit fixed-point logarithmic arithmetic unit is proposed for the possible application to mobile three-dimensional (3-D) graphics system. The proposed logarithmic arithmetic unit performs division, reciprocal, square-root, reciprocal-square-root and square operations in two clock cycles and powering operation in four clock cycles. It can program its number range for accurate computation flexibility of 3-D graphics pipeline and eight -region piecewise linear approximation model for logarithmic and antilogarithmic conversion to reduce the operation error under 0.2%. Its test chip is implemented by 1-poly 6-metal 0.18-mum CMOS technology with 9-k gates. It operates at the maximum frequency of 231 MHz and consumes 2.18 mW at 1.8-V supply
26 February 2008 in IEEE Transactions on Computers
A unified computation method of vector and elementary functions is proposed for handheld 3D graphics systems. It unifies vector operations like vector multiply, multiply-and-add, divide, divide-by-square-root, and dot product and elementary functions like trigonometric, inverse trigonometric, hyperbolic, inverse hyperbolic, power (xy with two variables), and logarithm to an arbitrary base into a single four-way arithmetic platform. A number system called the fixed-point hybrid number system (FXP-HNS), which combines the fixed-point number system (FXP) and the logarithmic number system (LNS), is proposed for the power and area-efficient unification. Power and area-efficient logarithmic and antilogarithmic conversion schemes are also proposed for the data conversions between fixed-point and logarithmic numbers in the FXP-HNS and achieve 0.41 percent and 0.08 percent maximum conversion errors, respectively. The unified arithmetic unit based on the proposed schemes is presented with less than 6.3 percent operation error. Its fully pipelined architecture achieves single-cycle throughput with maximum four-cycle latency for all of the supported operations. Comparison results show that the proposed arithmetic unit achieves 30 percent power and 10.9 percent area reductions and runs two times faster than the previous approach.
2 May 2009 in IEEE Journal of Solid-State Circuits
A low-power and high-performance 4-way 32-bit stream processor core is developed for handheld low-power 3-D graphics systems. It contains a floating-point unified matrix, vector, and elementary function unit. By exploiting the logarithmic arithmetic and the proposed adaptive number conversion scheme, a 4-way arithmetic unit achieves a single-cycle throughput for all these operations except for the matrix-vector multiplication that takes 2 cycles per result, which were 4 cycles in conventional way. The processor featured by this functional unit and several proposed architectural schemes including embedded register index calculations, functional unit reconfiguration, and operand forwarding in logarithmic domain achieves 19.1% cycle count reduction for OpenGL transformation and lighting (TnL) operation from the latest work. The proposed stream processor core is integrated into a 3-D graphics SoC as a vertex shader to show its effectiveness. The entire SoC is fabricated into a test chip using 1-poly 6-metal 0.18 mum CMOS technology. The 17.2 mm2 chip contains 1.57 M transistors and 29 kB SRAM. The stream processor core takes 9.7 mm2 and dissipates 86.8 mW at 200 MHz operating frequency. It shows a peak performance of 141 Mvertices/s for geometry transformation (TFM) and achieves 17.5% performance improvement and 44.7% and 39.4% power and area reductions for the TFM from the latest work. For power management of the SoC, the chip is divided into the triple power domains separately controlled by dynamic voltage and frequency scaling (DVFS). With this scheme, it shows 52.4 mW power consumption at 60 fps, 50.5% power reduction from the latest work.
23 July 2007 in IEEE Journal of Solid-State Circuits
A low-power, area-efficient four-way 32-bit multifunction arithmetic unit has been developed for programmable shaders for handheld 3D graphics systems. It adopts the logarithmic number system (LNS) at the arithmetic core for the single-cycle throughput and the small-size low-power unification of various complicated arithmetic operations such as power, logarithm, trigonometric functions, vector-SIMD multiplication, division, square root and vector dot product. 24-region and 16-region piecewise linear logarithmic and antilogarithmic converters are proposed with 0.8% and 0.02% maximum conversion error, respectively. All the supported operations are implemented with less than 6.3% operation error and unified into a single arithmetic platform with maximum four-cycle latency and single-cycle throughput. A 93 K gate test chip is fabricated using one-poly five-metal 0.18-mum CMOS technology. It operates at 210 MHz with maximum power consumption of 15.3 mW at 1.8 V.
A 3D graphics processor fabricated using 0.18mum 6M CMOS contains 1.57M transistors and 29kB SRAM in a core size of 17.2mm 2 . The vertex shader utilizes a logarithmic number system for 141 Mvertices/s and the 3 power domains are controlled separately by dynamic voltage and frequency scaling for 52.4mW at 60fps.
16 September 2015 in IEEE Journal of Solid-State Circuits
A marker-less camera pose estimation engine (CPEE) with reconfigurable logarithmic SIMD processor is proposed for the view angle estimation used in mobile augmented reality (AR) applications. Compared to previous marker-based approach, marker-less camera pose estimation can overlay virtual images directly on natural world without the help of markers. However, they require 150× larger computing costs and large power consuming floating-point operations where such requirement severely restricts real-time operations and low-power implementations in mobile platform, respectively. To overcome the gap in computational costs between marker-based and marker-less method, speculative execution (SE) and reconfigurable data-arrangement layer (RDL) are proposed to reduce computing time by 17% and 27%, respectively. For low-power implementation of floating-point units, logarithmic processing element (LPE) is designed to reduce overall power consumption by 18%. The proposed marker-less CPEE is fabricated in 65 nm Logic CMOS technology, and successfully realizes real-time marker-less camera pose estimation with only 27 mW power consumption.