We present a MUSIC-based Direction of Arrival (DOA) estimation strategy using small antenna arrays, via employing deep learning for reconstructing the signals of a virtual large antenna array. Not only does the proposed strategy deliver significantly better performance than simply plugging the incoming signals into MUSIC, but surprisingly, the performance is also better than directly using an actual large antenna array with MUSIC for high angle ranges and low test SNR values. We further analyze the best choice for the training SNR as a function of the test SNR, and observe dramatic changes in the behavior of this function for different angle ranges.

The development of computer based systems expands the usage of computer based application in human life. It can be observed that illegal activities such as unauthorized data access, data theft, data modification and various other intrusion activities are rapidly growing during last decade. Hence, deployment and continuous improvement of Intrusion Detection Systems (IDS) are of paramount importance. Training, testing and evaluation of IDS with real network traffic is significant challenge, so most of IDS evaluation is based on intrusion datasets. Therefore, analysis of intrusion datasets are of paramount importance. In this paper, we evaluated Aegean Wi-Fi Intrusion Dataset (AWID) with different machine learning techniques. Feature reduction techniques such as Information Gain (IG) and Chi-Squared statistics (CH) were applied to evaluate dataset performance with feature reduction. Results of experiments show that feature reduction can lead to better analysis in terms of accuracy, processing time and complexity. It was observed that, the maximum increment of classification accuracy with feature reduction from 110 to 41 is 2.4%.

A variety of applications and forwarding protocols have been proposed for opportunistic networks (OppNets) in the literature. However, the methodology of evaluation, testing and comparing these forwarding protocols are not standardized yet, which leads to large levels of ambiguity in performance evaluation studies. Performance results depend largely on the evaluation environment, and on the used parameters and models. More comparability in evaluation scenarios and methodologies would largely improve also the availability of protocols and the repeatability of studies, and thus would accelerate the development of this research topic. In this survey paper, we focus our attention on how various OppNets data forwarding protocols are evaluated rather than what they actually achieve. We explore the models, parameters and the evaluation environments and make observations about their scalability, realism and comparability. Finally, we deduce some best practices on how to achieve the largest impact of future evaluation studies of OppNets data dissemination/forwarding protocols.

We address the detection of material defects, which are inside a layered material structure using compressive sensing-based multiple-input and multiple-output (MIMO) wireless radar. Here, strong clutter due to the reflection of the layered structure’s surface often makes the detection of the defects challenging. Thus, sophisticated signal separation methods are required for improved defect detection. In many scenarios, the number of defects that we are interested in is limited, and the signaling response of the layered structure can be modeled as a low-rank structure. Therefore, we propose joint rank and sparsity minimization for defect detection. In particular, we propose a non-convex approach based on the iteratively reweighted nuclear and ${\ell }_1$-norm (a double-reweighted approach) to obtain a higher accuracy compared to the conventional nuclear norm and ${\ell }_1$-norm minimization. To this end, an iterative algorithm is designed to estimate the low-rank and sparse contributions. Further, we propose deep learning-based parameter tuning of the algorithm (i.e., algorithm unfolding) to improve the accuracy and the speed of convergence of the algorithm. Our numerical results show that the proposed approach outperforms the conventional approaches in terms of mean squared errors of the recovered low-rank and sparse components and the speed of convergence.

Estimating parameters and properties of various materials without causing damage to the material under test (MUT) is important in many applications. Thus, in this letter, we address MUT's parameter estimation by wireless sensing. Here, the precision of the estimation depends on the accurate estimation of the properties of the reflected signal from the MUT (e.g., number of reflections, their amplitudes, and time delays). For a layered MUT, there are multiple reflections, and due to the limited bandwidth at the receiver, these reflections superimpose with each other. Since the number of reflections coming from the MUT is limited, we utilize sparse signal processing (SSP) to decompose the reflected signal. In SSP, a so called dictionary is required to obtain a sparse representation of the signal. Here, instead of a fixed dictionary, an iterative dictionary-update technique is proposed to improve the estimation of the reflected signal. To validate the proposed method, a vector network analyzer (VNA)-based measurement setup is used. It turns out that the estimated dielectric constants of the MUTs are in close agreement with those reported in literature. Further, the proposed approach outperforms the state-of-the-art model-based curve-fitting approach in thickness estimation.

Self-localization based on passive RFID-based has many potential applications. One of the main challenges it faces is the suppression of the reflected signals from unwanted objects (i.e., clutter). Typically, the clutter echoes are much stronger than the backscattered signals of the passive tag landmarks used in such scenarios. Therefore, successful tag detection can be very challenging. We consider two types of tags, namely low-Q and high-Q tags. The high-Q tag features a sparse frequency response, whereas the low-Q tag presents a broad frequency response. Further, the clutter usually showcases a short-lived response. In this work, we propose an iterative algorithm based on a low-rank plus sparse recovery approach (RPCA) to mitigate clutter and retrieve the landmark response. In addition to that, we compare the proposed approach with the well-known time-gating technique. It turns out that RPCA outperforms significantly time-gating for low-Q tags, achieving clutter suppression and tag identification when clutter encroaches on the time-gating window span, whereas it also increases the backscattered power at resonance by approximately 12 dB at 80 cm for high-Q tags. Altogether, RPCA seems a promising approach to improve the identification of passive indoor self-localization tag landmarks.