Leaf area is an important plant canopy structure parameter with important ecological significance. Light detection and ranging technology (LiDAR) with the application of a terrestrial laser scanner (TLS) is an appealing method for accurately estimating leaf area; however, the actual utility of this scanner depends largely on the efficacy of point cloud data (PCD) analysis. In this paper, we present a novel method for quantifying total leaf area within each tree canopy from PCD. Firstly, the shape, normal vector distribution and structure tensor of PCD features were combined with the semi-supervised support vector machine (SVM) method to separate various tree organs, i.e., branches and leaves. In addition, the moving least squares (MLS) method was adopted to remove ghost points caused by the shaking of leaves in the wind during the scanning process. Secondly, each target tree was scanned using two patterns, i.e., one scan and three scans around the canopy, to reduce the occlusion effect. Specific layer subdivision strategies according to the acquisition ranges of the scanners were designed to separate the canopy into several layers. Thirdly, 10% of the PCD was randomly chosen as an analytic dataset (ADS). For the ADS, an innovative triangulation algorithm with an assembly threshold was designed to transform these discrete scanning points into leaf surfaces and estimate the fractions of each foliage surface covered by the laser pulses. Then, a novel ratio of the point number to leaf area in each layer was defined and combined with the total number of scanned points to retrieve the total area of the leaves in the canopy. The quantified total leaf area of each tree was validated using laborious measurements with a LAI-2200 Plant Canopy Analyser and an LI-3000C Portable Area Meter. The results showed that the individual tree leaf area was accurately reproduced using our method from three registered scans, with a relative deviation of less than 10%. Nevertheless, estimations from only one scan resulted in a deviation of >25% in the retrieved individual tree leaf area due to the occlusion effect. Indeed, this study provides a novel connection between leaf area estimates and scanning sensor configuration and supplies an interesting method for estimating leaf area based on PCD.

This study aims at searching for characteristic parameters of tree trunks to establish a volume model and dynamic analysis of volume based on terrestrial laser scanning (TLS). We collected three phases of data over 5 years from an artificial Liriodendron chinense forest. The upper diameters of the tree stump and tree height data were obtained by using the multi-station scanning method. A novel hierarchical TLS point cloud feature named the height cumulative percentage (Hz%) was designed. The shape of the upper tree trunk extracted by the point cloud was equivalent to that of the analytical tree with inflection points at 25% and 50% of the height, and the dynamic volume change of the model, which was established by hierarchical features, was highly related to the volume change of the actual point cloud extraction. The obtained results reflected the fact that the Hz% value provided by multi-station scanning was closely related to the characteristic stumpage parameters and could be used to invert the dynamic forest structure. The volume model established based on point cloud hierarchical parameters in this study could be used to monitor the dynamic changes of forest volume and to provide a new reference for applying TLS point clouds for the dynamic monitoring of forest resources.