Subsurface fluid injection is a well-established technology that is often used for enhanced oil recovery from oil fields. The injection process can often cause deformation due to changes in pore pressure, which can be measured using interferometric synthetic aperture radar (InSAR). In this study, the Karamay oil field in Xinjiang served as an example and an attempt was made to detect subsurface fluid injection-induced ground surface deformation. First, possible deformation was assessed across the entire Karamay oil field during 2006–2010 by stacking multiple interferometric pairs. Then, the spatiotemporal evolution of deformation around well Hei103 was studied using the small baseline subset (SBAS) algorithm. The results suggest that localized deformation at the Karamay oil field was related to oil production. Additionally, subsurface fluid injection caused obvious surface uplift around the Hei103 well region.
On 20 April 2013, a moment magnitude (Mw) 6.6 earthquake occurred in the Lushan region of southwestern China and caused more than 190 fatalities. In this study, we use geodetic data from nearly 30 continuously operating global positioning system (GPS) stations, two periods of leveling data, and interferometric synthetic aperture radar (InSAR) observations to image the coseismic deformation of the Lushan earthquake. By using the Helmert variance component estimation method, a joint inversion is performed to estimate source parameters by using these GPS, leveling, and InSAR data sets. The results indicate that the 2013 Lushan earthquake occurred on a blind thrust fault. The event was dominated by thrust faulting with a minor left-lateral strike–slip component. The dip angle of the seismogenic fault was approximately 45.0°, and the fault strike was 208°, which is similar to the strike of the southern Longmenshan fault. Our finite fault model reveals that the peak slip of 0.71 m occurred at a depth of ~12 km, with substantial slip at depths of 6–20 km. The estimated magnitude was approximately Mw 6.6, consistent with seismological results. Furthermore, the calculated static Coulomb stress changes indicate that the 2013 Lushan earthquake may have been statically triggered by the 2008 Wenchuan earthquake.
Because of the constant northward movement of the Indian plate and blockage of the Eurasian continent, the Qinghai–Tibet Plateau has been extruded by north–south compressive stresses since its formation. This has caused the plateau to escape eastward to form a large-scale east–west strike-slip fault and a north–south extensional tectonic system. The Karakorum–Jiali fault, a boundary fault between the Qiangtang and Lhasa terranes, plays an important role in the regional tectonic evolution of the Qinghai–Tibet Plateau. The Gyaring Co fault, in the middle of the Karakoram–Jiali fault zone, is a prominent tectonic component. There have been cases of strong earthquakes of magnitude 7 or greater in this fault, providing a strong earthquake occurrence background. However, current seismic activity is weak. Regional geodetic observation stations are sparsely distributed; thus, the slip rate of the Gyaring Co fault remains unknown. Based on interferometric synthetic aperture radar (InSAR) technology, we acquired current high-spatial resolution crustal deformation characteristics of the Gyaring Co fault zone. The InSAR-derived deformation features were highly consistent with Global Positioning System observational results, and the accuracy of the InSAR deformation fields was within 2 mm/y. According to InSAR results, the Gyaring Co fault controlled the regional crustal deformation pattern, and the difference in far-field deformation on both sides of the fault was 3–5 mm/y (parallel to the fault). The inversion results of the back-slip dislocation model indicated that the slip rate of the Gyaring Co fault was 3–6 mm/y, and the locking depth was ~20 km. A number of v-shaped conjugate strike-slip faults, formed along the Bangong–Nujiang suture zone in the central and southern parts of the -Tibet Plateau, played an important role in regional tectonic evolution. V-shaped conjugate shear fault systems include the Gyaring Co and Doma–Nima faults, and the future seismic risk cannot be ignored.
This study uses the least squares collocation method to fuse the leveling vertical deformation velocity in the Sichuan–Yunnan region with the GNSS observations of this region from 320 stations in the China Crustal Movement Observation Network (CMONOC) and the China Continental Tectonic Environment Monitoring Network (CMTEMN) from 1999 to 2017. Such fusion is to improve the accuracy of the vertical deformation rates in large spatial scales. The fused vertical deformation results show that: (1) the fused deformation field has a uniform spatial distribution, and shows detailed change characteristics of key regions; (2) the current vertical crustal motion in this region is featured by the contemporaneous occurrence of crustal compression, shortening and uplift and basin extensional subsidence; (3) most areas in this region experience uplifts, as the lateral push of the Qinghai–Tibet Plateau was blocked by the Sichuan Basin. The areas on the northwest side of the Longmenshan fault and the Lijiang-Xiaojinhe fault are dominated by uplifts, with the velocity of 1.5 mm/a–5.5 mm/a, and the region on the southeast side has slight uplifts, with the velocity of 1.0 mm/a–1.5 mm/a; (4) many areas have high gradient vertical deformation, especially the region close to the Wenshan fault and on the two sides of the Yarlung Zangbo fault that has the value of 3.0–4.0 × 10−8/a, deserving further attention to be paid to the long-term earthquake hazards.