We report high-energy, high-efficiency second harmonic generation in a near-infrared all-solid-state burst-mode picosecond laser at a repetition rate of 1 kHz with four pulses per burst using a type-I noncritical phase-matching lithium triborate crystal. The pulses in each burst have the same time delay ( ${\sim}1~\text{ns}$ ), the same pulse duration ( ${\sim}100~\text{ps}$ ) and different relative amplitudes that can be adjusted separately. A mode-locked beam from a semiconductor saturable absorber mirror is pulse-stretched, split into seed pulses and injected into a Nd:YAG regenerative amplifier. After the beam is reshaped by aspheric lenses, a two-stage master oscillator power amplifier and 4f imaging systems are applied to obtain a high power of ${\sim}100~\text{W}$ . The 532 nm green laser has a maximum conversion efficiency of 68%, an average power of up to 50 W and a beam quality factor $M^{2}$ of 3.5.
This paper presents an 8 mJ 355 nm 1 kHz burst-mode picosecond laser system, where the energy of each subpulse in the burst mode is 2 mJ. Under optimal operational conditions, a noncritical phase-matched LiB 3 O 5 (LBO) crystal and a type-II angle- and phase-matched LBO crystal are used as the second- and third-harmonic generation crystals, respectively. The largest conversion efficiency from 1064 nm to 355 nm was 38%, and the highest output power at 355 nm was 8 W; further, the beam quality was measured as and .