Xuefei Yang

Dr. Xuefei Yang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 May 2020 in Water
Verified
Journal Article
Open access
PDF file
XYXuefei Yang
Xuefei Yang
VLVictor Lopez-Grimau
Victor Lopez-Grimau
MVMercedes Vilaseca
Mercedes Vilaseca
MCMartí Crespi
Martí Crespi
In this study, three different biological methods—a conventional activated sludge (CAS) system, membrane bioreactor (MBR), and moving bed biofilm reactor (MBBR)—were investigated to treat textile wastewater from a local industry. The results showed that technically, MBR was the most efficient technology, of which the chemical oxygen demand (COD), total suspended solids (TSS), and color removal efficiency were 91%, 99.4%, and 80%, respectively, with a hydraulic retention time (HRT) of 1.3 days. MBBR, on the other hand, had a similar COD removal performance compared with CAS (82% vs. 83%) with halved HRT (1 day vs. 2 days) and 73% of TSS removed, while CAS had 66%. Economically, MBBR was a more attractive option for an industrial-scale plant since it saved 68.4% of the capital expenditures (CAPEX) and had the same operational expenditures (OPEX) as MBR. The MBBR system also had lower environmental impacts compared with CAS and MBR processes in the life cycle assessment (LCA) study, since it reduced the consumption of electricity and decolorizing agent with respect to CAS. According to the results of economic and LCA analyses, the water treated by the MBBR system was reused to make new dyeings because water reuse in the textile industry, which is a large water consumer, could achieve environmental and economic benefits. The quality of new dyed fabrics was within the acceptable limits of the textile industry.

1 February 2019 in Science of The Total Environment
Verified
Journal Article
Closed access
ÒAÒscar Aznar-Alemany
Òscar Aznar-Alemany
XYXuefei Yang
Xuefei Yang
MAMariana B. Alonso
Mariana B. Alonso
ECErli Schneider COSTA
Erli Schneider COSTA
JTJoão Paulo M. Torres
João Paulo M. Torres
EEEthel Eljarrat
Ethel Eljarrat

19 November 2021 in Membranes
Verified
Journal Article
Open access
PDF file
XYXuefei Yang
Xuefei Yang
VLVictor Lopez-Grimau
Victor Lopez-Grimau
A hybrid Moving Bed Biofilm Reactor—Membrane Bioreactor (MBBR-MBR) was developed for the treatment of wastewater from a Spanish textile company. Compared with conventional activated sludge (CAS) treatment, the feasibility of this hybrid system to reduce economic and environmental impact on an industrial scale was conducted. The results showed that, technically, the removal efficiency of COD, TSS and color reached 93%, 99% and 85%, respectively. The newly dyed fabrics performed with the treated wastewater were qualified under the standards of the textile industry. Economically, the values of Capital Expenditure (CAPEX) calculated for the hybrid MBBR-MBR system are profitable because of the reduction in Operational Expenditure (OPEX) when compared with CAS treatment, due to the lower effluent discharge tax thanks to the higher quality of the effluent and the decolorizing agent saved. The result of Net Present Value (NPV) and the Internal Rate of Return (IRR) of 18% suggested that MBBR-MBR is financially applicable for implantation into the industrial scale. The MBBR-MBR treatment also showed lower environmental impacts than the CAS process in the life cycle assessment (LCA) study, especially in the category of climate change, thanks to the avoidance of using extra decolorizing agent, a synthetic product based on a triamine.

28 March 2021 in Coloration Technology
Verified
Journal Article
Closed access
PDF file
XYXuefei Yang
Xuefei Yang
VLVictor Lopez-Grimau
Victor Lopez-Grimau
MVMercedes Vilaseca
Mercedes Vilaseca
MCMartí Crespi
Martí Crespi
JRJudit Ribera‐Pi
Judit Ribera‐Pi
XMXavier Martínez‐Lladó
Xavier Martínez‐Lladó

1 January 2018 in Desalination and Water Treatment
Verified
Journal Article
Open access
XYXuefei Yang
Xuefei Yang
MCMartí Crespi
Martí Crespi
VLVictor Lopez-Grimau
Victor Lopez-Grimau

15 September 2026 in Water Science & Technology
Verified
Journal Article
Open access
HRHabib Ur Rehman
Habib Ur Rehman
KMKamran Manzoor
Kamran Manzoor
Sher Jamal KhanSher Jamal Khan
Sher Jamal Khan
MAMuhammad Arshad
Muhammad Arshad
XYXuefei Yang
Xuefei Yang
Graphical abstract summarizing the An-MDBR treatment concept for pulp and paper wastewater. The image shows wastewater entering an anaerobic CSTR, followed by membrane distillation using a PTFE membrane, producing treated water and biogas. A temperature comparison section presents 35, 45, and 55°C operating conditions with flux, COD removal, fouling, contact angle, and wetting behavior. The graphic highlights 45°C as the optimal condition and shows membrane characterization methods including FTIR, Raman, XRD, and contact angle analysis. This study investigates the performance of a lab-scale anaerobic membrane distillation bioreactor (An-MDBR) for treating synthetic pulp and paper (P&P) wastewater under mesophilic (35–45 °C) and thermophilic (55 °C) conditions. The An-MDBR integrates an anaerobic continuous stirred tank reactor (CSTR) with a submerged membrane distillation (MD) module in a side-stream configuration. Wastewater with chemical oxygen demand (COD) of 1,300 ± 130 mg/L was treated to evaluate COD removal, biogas production, membrane fouling, and operational stability. Daily COD removal of 23.1 g/day (76–84% from CSTR) was observed at a flow rate of 21.6 mL/day, yielding specific methane (CH4) production of 0.89–1.42 mL CH4/g COD removed. Optimal performance occurred at 45 °C, balancing flux stability (17 LMH), high organic removal, and methane-rich biogas (50.5% CH4; 1.2 ± 0.1 mL CH4/g COD). Biomass parameters (VFA/alkalinity 0.7) indicated stable microbial activity, with near-complete removal of PO43−, >90% SO42−, and approximately 40% total Kjeldahl nitrogen (TKN). Membrane fouling, dominated by organic deposition and high temperature-induced inorganic scaling confirmed by Fourier Transform Infrared Spectroscopy, Raman, and X-ray diffraction analyses, caused progressive hydrophobicity loss, with contact angle decreasing from 111.6° (pristine) to 10.3° at 55 °C, leading to irreversible pore wetting and operational instability at thermophilic conditions.