We consider the disposal of spent nuclear fuel and high-level radioactive waste in horizontal holes drilled into deep, low-permeable geologic formations using directional drilling technology. Residual decay heat emanating from these waste forms leads to temperature increases within the drillhole and the surrounding host rock. The spacing of waste canisters and the configuration of the various barrier components within the horizontal drillhole can be designed such that the maximum temperatures remain below limits that are set for each element of the engineered and natural repository system. We present design calculations that examine the thermal evolution around heat-generating waste for a wide range of material properties and disposal configurations. Moreover, we evaluate alternative layouts of a monitoring system to be part of an in situ heater test that helps determine the thermal properties of the as-built repository system. A data-worth analysis is performed to ensure that sufficient information will be collected during the heater test so that subsequent model predictions of the thermal evolution around horizontal deposition holes will reliably estimate the maximum temperatures in the drillhole. The simulations demonstrate that the proposed drillhole disposal strategy can be flexibly designed to ensure dissipation of the heat generated by decaying nuclear waste. Moreover, an in situ heater test can provide the relevant data needed to develop a reliable prediction model of repository performance under as-built conditions.
Spent nuclear fuel and high-level radioactive waste can be disposed in deep horizontal drillholes in sedimentary, metamorphic or igneous rocks. Horizontal drillhole disposal has safety, operational and economic benefits: the repository is deep in the brine-saturated zone far below aquifers in a reducing environment of formations that can be shown to have been isolated from the surface for exceedingly long times; its depth provides safety against inadvertent intrusion, earthquakes and near-surface perturbations; it can be placed close to the reactors and interim storage facilities, minimizing transportation; disposal costs per ton of waste can be kept substantially lower than for mined repositories by its smaller size, reduced infrastructure needs and staged implementation; and, if desired, the waste could be retrieved using “fishing” technology. In the proposed disposal concept, corrosion-resistant canisters containing unmodified fuel assemblies from commercial reactors would be placed end-to-end in up to 50 cm diameter horizontal drillholes, a configuration that reduces mechanical stresses and keeps the temperatures below the boiling point of the brine. Other high-level wastes, such as capsules containing 137Cs and 90Sr, can be disposed in small-diameter horizontal drillholes. We provide an overview of this novel disposal concept and its technology, discuss some of its safety aspects and compare it to mined repositories and the deep vertical borehole disposal concept.
The disposal of spent nuclear fuel and other high-level radioactive waste in deep horizontal drillholes is an innovative system. Canisters of highly corrosion-resistant nickel-chromium-molybdenum (Ni-Cr-Mo) alloys are specified for the disposal of this nuclear waste. The canisters are emplaced along a steel casing in a horizontal drillhole that is one to three kilometers deep into or below a low-permeability geologic formation. The drillhole is in fully saturated rock with anoxic and reducing pore waters. A time-interval analysis method was used to track the evolution of the environment and to analyze corrosion performance of a representative engineered barrier system (EBS) configuration. In this analysis, the canisters remained perforation-free for tens of thousands of years. The amounts of hydrogen and metal oxides formed as by-products of the metal corrosion process were determined. These by-products are of interest, because both hydrogen and metal oxides can affect the chemical composition of the environment and the transport and sorption behavior of radionuclides and other species. Beneficial attributes that contribute to the extraordinarily long life of the canisters were identified. Several inherent characteristics of the horizontal drillhole disposal system reduced the complexities and uncertainties of the analysis.
Isolation of spent nuclear fuel assemblies in deep vertical boreholes is analyzed. The main safety features of the borehole concept are related to the repository’s great depth, implying (a) long migration distances and correspondingly long travel times, allowing radionuclides to decay, (b) separation of the repository from the dynamic hydrological cycle near the land surface, (c) stable geological and hydrogeological conditions, and (d) a geochemically reducing environment. An integrated simulation model of the engineered and natural barrier systems has been developed to examine multiple scenarios of the release of radionuclides from the waste canisters, the transport through a fractured porous host rock, and the extraction of potentially contaminated drinking water from an aquifer. These generic simulations include thermal effects from both the natural geothermal gradient and the heat-generating waste, the influence of topography on regional groundwater flow, moderated by salinity stratification at depth, and the role of borehole sealing. The impact of these processes on the transport of select radionuclides is studied, which include long-lived, soluble, sorbing or highly mobile isotopes along with a decay chain of safety-relevant actinide metals. The generic analyses suggest that a deep vertical borehole repository has the potential to be a safe option for the disposal of certain waste streams, with the depth itself and the stable hydrogeological environment encountered in the emplacement zone providing inherent long-term isolation, which allows for reduced reliance on a complex engineered barrier system.
The depth and layout of a horizontal borehole repository has the potential to offer strong isolation of nuclear waste from the surface. However, the isolation may be compromised by the borehole used to access the repository, as it could provide a direct fast-flow path transporting radionuclides from the disposal section to the accessible environment. Thus, backfilling the disposal section and sealing the access hole are considered essential engineered safety components. To analyze the importance of plugging the open space between canisters and sealing the access hole, we numerically calculate non-isothermal fluid flow and radionuclide transport through the borehole and the surrounding geosphere for a variety of scenarios, which include backfill materials with different sealing properties and configurations that potentially induce strong driving forces along both the horizontal and vertical sections of the borehole. The simulations indicate that the dose contribution of radionuclides released through the access hole is small, even if the backfill material is of poor quality or has deteriorated, and even if considerable horizontal and vertical pressure gradients are imposed by assuming the underlying formation is overpressured and that the disposal section is intersected by faults activated during a seismic event. The modeling also reveals that the low influence of backfill integrity on repository performance partly arises from the very high length-to-diameter ratio of the borehole, which favors the radial diffusion of radionuclides—as well as pressure dissipation and associated advective transport—into the surrounding formation rather than axial transport along the borehole. The integrated modeling approach also exposes the importance of accounting for the connections and feedback mechanisms among the various subcomponents of the repository system.
The post-closure performance of a generic horizontal drillhole repository for the disposal of spent nuclear fuel (SNF) is quantitatively evaluated using a physics-based numerical model that accounts for coupled thermal-hydrological flow and radionuclide transport processes. The model incorporates most subcomponents of the repository system, from individual waste canisters to the geological far field. The main performance metric is the maximum annual dose to an individual drinking potentially contaminated water taken from a well located above the center of the repository. Safety is evaluated for a wide range of conditions and alternative system evolutions, using deterministic simulations, sensitivity analyses, and a sampling-based uncertainty propagation analysis. These analyses show that the estimated maximum annual dose is low (on the order of 10−4 mSv yr−1, which is 1000 times smaller than a typical dose standard), and that the conclusions drawn from this dose estimate remain valid even if considerable changes are made to key assumptions and property values. The depth of the repository and the attributes of its configuration provide the main safety function of isolation from the accessible environment. Long-term confinement of radionuclides in the waste matrix and slow, diffusion-dominated transport leading to long migration times allow for radioactive decay to occur within the repository system. These preliminary calculations suggest that SNF can be safely disposed in an appropriately sited and carefully constructed and sealed horizontal drillhole repository.