Slide-ring (SR) gels cross-linked by ring molecules are characterized by softness (low Young’s modulus), elasticity (low hysteresis loss), and toughness (large fracture energy). In this article, the mechanical and fracture properties of SR gels are reviewed to clarify the physical understanding of the relationship between the molecular-level sliding dynamics of the slide-ring cross-links and macroscopic properties of SR gels. The low Young’s modulus and large fracture energy of SR gels are expressed by simple equations as a function of the degree of sliding movement. The dynamic fracture behaviors of SR gels gives us the time scale of the sliding dynamics of the cross-links, which is at the micro-sec scale. The fast sliding motion of the cross-links leads to the elasticity of the SR gels. The SR concept can be applied to solvent-free elastomers and composite materials.
Macro- and micro-deformation properties of sintered copper die-attach material were evaluated. The macro-deformation properties are the properties, including the contribution of voids, and the micro-deformation properties are the properties, excluding the contribution of voids. Macro-deformation properties were evaluated by tensile tests at room temperature along with finite-element analysis (FEA). The specimens for these tests were made by sintering copper-oxide nano particles in the form of paste in a hydrogen atmosphere under low and high pressures. The micro-deformation properties were estimated by tensile test and FEA using a model that reproduces the micro-porous structure obtained from processing focused-ion beam scanning electron microscope data. The micro-stress/strain curve estimated for sintered copper was found to lie above the sintered silver and below the bulk copper. The porosity dependency of the macro-deformation properties of sintered copper was calculated using FEA models and the estimated micro-deformation property. The results obtained show that the macro-deformation properties of sintered copper are higher than those of sintered silver with similar porosity. This suggests that sintered copper die-attach material requires a lower sintering pressure than for sintered silver to achieve the same strength.