A numerical simulation was used to compare the characteristics of flows past two cylinders in tandem versus side-by-side arrangements. Numerical experiments were performed at various Reynolds numbers and with different distances between the two cylinders. Diverse characteristics of flow, such as drag force, vortex shedding, and pressure distributions were investigated here. In tandem arrangement, at a certain distance, the drag coefficients of both cylinders change abruptly. However, at other distances, the drag coefficients vary somewhat linearly with the distance between cylinders. In side-by-side deployment, when the distance is more than three times the cylinders’ diameter, the higher Reynolds number has a smaller drag coefficient (as in the case of a single cylinder). At points where the flow pattern, drag, and pressure coefficients change significantly, the critical spatial ratios between the two cylinders were determined at different Reynolds numbers. In addition to the study of such changes in flow characteristics, the effect of flow pattern on the pressure field and drag force coefficients, as well as their relationship, was also investigated.
1 September 2016 in KSCE Journal of Civil Engineering
The flow around a single circular cylinder with splitter plate was investigated using Computational Fluid Dynamics. The present study investigated the effects of varying splitter plate length and the Reynolds numbers on flow characteristic, such as vortex shedding, drag force, lift force, separation point, pressure, and friction coefficients of the cylinder. It was revealed that the vortex shedding behind cylinder is completely suppressed when the splitter plate length is longer than the critical value, which is proportional to the Reynolds number. The variation of drag and lift coefficients with respect to splitter length can be classified into two patterns of a monotonic decrease and a general decrease but with small increase. We found that the first pattern occurs at Reynolds number ≤ 180 and higher Reynolds number gives the second pattern. When the splitter plate length is similar to the diameter of the cylinder, the vortex frequency, drag, and lift coefficients reach local minimum depending on the Reynolds number. A functional relationship between drag coefficient, length of splitter plate, and Reynolds number was determined.