The planar monopole antenna is shown to provide extremely wideband impedance characteristics. Recently, many techniques to tailor and optimize the impedance bandwidth of these antennas have been investigated. These include the use of bevels, slots and shorting posts. These antennas are becoming popular, and have been proposed for modern and future wideband wireless applications. The radiation performance is also shown to be acceptable over a wide frequency range.
16 July 2001 in Microwave and Optical Technology Letters
This article reviews the state of the art in broadband antennas for emerging UWB applications and addresses the important issues of the broadband antenna design for UWB applications. First, a variety of planar monopoles with finite ground planes are reviewed. Next, the roll antennas with enhanced radiation performance are outlined. After that, the planar antennas printed on PCBs are described. A directional antipodal Vivaldi antenna is also presented for UWB applications. Last, a UWB antenna for wearable applications is exemplified
5 March 2008 in IEEE Transactions on Antennas and Propagation
A new design of a dual-frequency dual circularly-polarized slot antenna is presented. The dual-frequency is achieved using a single-layer microstrip-fed configuration coupled to a modified annular-slot antenna. The dual sense circular-polarization is obtained by four unequal linear slots which augment the annular slot. Experimental results show the proposed antenna has good circular polarization characteristics for both right-hand circular polarization (RHCP) and left-hand circular polarization (LHCP). The 10 dB return loss impedance bandwidths for the lower (RHCP) and higher (LHCP) bands are 26.7% and 11.3%, respectively. The 3 dB axial-ratio bandwidths are 6.1% and 6.0% with respect to 1.5 GHz (RHCP) and 2.6 GHz (LHCP), respectively.
9 July 2007 in IEEE Transactions on Antennas and Propagation
A novel probe-fed single-layer annular-ring patch antenna for dual-frequency circular polarization is evaluated numerically and experimentally verified. The proposed antenna consists of a small circular patch surrounded by two concentric annular-rings, which is loaded by an unequal lateral cross-slot ground plane. The circularly-polarized frequency ratio of the two resonant modes is tunable to a small value, suitable for wireless communications systems. The patch size of the proposed antenna is reduced by about 53% compared to the conventional circular patch at a given frequency. The radiation characteristics of the novel antenna are also presented.
29 April 2010 in IEEE Antennas and Wireless Propagation Letters
A reconfigurable microstrip antenna is proposed for low-cost adaptive beam-switching applications. A small patch-slot ring structure is used as the radiating element where an asymmetrical arrangement of p-i-n diodes is employed to switch the pattern in four directions. The antenna provides pattern switching of 65° and 45° in its fundamental mode for the elevation and azimuth planes, respectively. By maintaining the resonant frequency and beamwidth as relatively constant, beam switching is realized using a single feed point.