mmWave radio, although instrumental for achieving the required 5G capacity KPIs, necessitates the need for a very large number of access points, which places an immense strain on the current network infrastructure. In this article, we try to identify the major challenges that inhibit the design of the Next Generation Fronthaul Interface in two upcoming distinctively highly dense environments: in Urban 5G deployments in metropolitan areas, and in ultra-dense Hotspot scenarios. Second, we propose a novel centralized and converged analog Fiber-Wireless Fronthaul architecture, specifically designed to facilitate mmWave access in the above scenarios. The proposed architecture leverages optical transceivers, optical add/drop multiplexers and optical beamforming integrated photonics towards a Digital Signal Processing analog fronthaul. The functional administration of the fronthaul infrastructure is achieved by means of a packetized Medium Transparent Dynamic Bandwidth Allocation protocol. Preliminary results show that the protocol can facilitate Gb/s-enabled data transport while abiding to the 5G low-latency KPIs in various network traffic conditions.

The upcoming fifth generation (5G) of mobile communications urge software defined networks (SDN) and network function virtualization (NFV) to join forces with the multi-access edge computing (MEC) cause. Thus, reduced latency and increased capacity at the edge of the network can be achieved, to satisfy the requirements of the internet of things (IoT) ecosystem. If not properly orchestrated, the flexibility of the virtual network functions (VNFs) incorporation, in terms of deployment and lifecycle management, may cause serious issues in the NFV scheme. As the service level agreements (SLAs) of the 5G applications compete in an environment with traffic variations and VNF placement options with diverse computing or networking resources, an online placement approach is needed. In this paper, we discuss the VNF lifecycle management challenges that arise from such heterogeneous architecture, in terms of VNF onboarding and scheduling. In particular, we enhance the intelligence of the NFV orchestrator (NFVO) by providing i) a latency-based embedding mechanism, where the VNFs are initially allocated to the appropriate tier, and ii) an online scheduling algorithm, where the VNFs are instantiated, scaled, migrated and destroyed based on the actual traffic. Finally, we design and implement a MEC-enabled 5G platform to evaluate our proposed mechanisms in real-life scenarios. The experimental results demonstrate that our proposed scheme maximizes the number of served users in the system by taking advantage of the online allocation of edge and core resources, without violating the application SLAs.

In this paper, we propose a switch on/off algorithm for Base Stations (BSs), which exploits the knowledge of the distance between the User Equipments (UEs) and their associated BS. Our novel approach hopes to provide an improvement to the problem of energy consumption. The major concern lies on reducing the energy consumption of the telecommunication networks by optimizing the power utilization without sacrificing the offered Quality of Service (QoS). Our proposed scheme achieves a significant power saving, based on switching off the Base Stations that are underutilized during low traffic periods (especially during night) in the LTE-Advanced.

Harvesting energy in the human environment has been identified as an effective way to charge the body sensor nodes in wireless body area networks (WBANs). In such networks, the capability of the nodes to detect events is of vital importance and complements the stringent quality of service (QoS) demands in terms of delay, throughput, and packet loss. However, the scarce energy collected by human motions, along with the strict requirements of vital health signals in terms of QoS, raises important challenges for WBANs and stresses the need for new integrated QoS-aware energy management schemes. In this paper, we propose a joint power-QoS (PEH-QoS) control scheme, composed of three modules that interact in order to make optimal use of energy and achieve the best possible QoS. The proposed scheme ensures that a sensor node is able to detect the medical events and transmit the respective data packets efficiently. Extensive simulations, conducted for different human activities (i.e., relaxing, walking, running, and cycling), have shown that the application of PEH-QoS in a medical node increases the detection efficiency, the throughput, and the energy efficiency of the system.

In the new era of connectivity, marked by the explosive number of wireless electronic devices and the need for smart and pervasive applications, Machine-to-Machine (M2M) communications are an emerging technology that enables the seamless device interconnection without the need of human interaction. The use of M2M technology can bring to life a wide range of mHealth applications, with considerable benefits for both patients and healthcare providers. Many technological challenges have to be met, however, to ensure the widespread adoption of mHealth solutions in the future. In this context, we aim to provide a comprehensive survey on M2M systems for mHealth applications from a wireless communication perspective. An end-to-end holistic approach is adopted, focusing on different communication aspects of the M2M architecture. Hence, we first provide a systematic review ofWireless Body Area Networks (WBANs), which constitute the enabling technology at the patient’s side, and then discuss end-to-end solutions that involve the design and implementation of practical mHealth applications. We close the survey by identifying challenges and open research issues, thus paving the way for future research opportunities.

Network infrastructure sharing and base station switching off mechanisms have been recently introduced as promising solutions toward energy and cost reduction in cellular networks. Although these techniques are usually studied independently, their combination offers new alternatives to MNOs for serving their users and could potentially provide them with additional benefits. In this article we introduce the concept of intra-cell roaming-based infrastructure sharing, where the MNOs may switch off their BSs and roam their traffic to active BSs operated by other MNOs in the same cell. Motivated by the coexistence of multiple operators in the same area, we present possible network deployments and architectures in current and future cellular scenarios, discussing their particular characteristics. In addition, we propose an innovative distributed game theoretic BS switching off scheme, employing an integrated cost function that takes into account all the different cases for a given operator to serve its own traffic (i.e. through active BSs of neighboring cells or exploiting intra-cell roaming-based infrastructure sharing). Finally, we demonstrate some indicative simulation results in realistic scenarios to quantify the potential energy and financial benefits that our proposed scheme offers to the MNOs in multi-operator environments, providing them with the necessary incentives to participate in the infrastructure sharing.