Using the immersion lensing technique, the resolution of a conventional spherical lens can be improved by a factor of 1/n over its value in air (n, the refractive index of the immersion medium). Depending on the relative position between an object and a lens, either a real or a virtual image is formed. Here we report a new physical phenomenon experimentally observed in the microscale lens imaging. We find that when a microscale spherical lens is semi-immersed in a medium, the resolution of the lens is improved as it can intercept more fine details of the object. However, the microscale lens has two image channels for the fine and coarse details and two images corresponding to the two components can be formed simultaneously. Our findings will advance the understanding of the super-resolution imaging mechanisms in microscale lenses.

A passive radiative cooling method has a significant influence on thermal management applications because it can cool without any energy input. This work both experimentally and theoretically demonstrates a multilayer thin film structure with high solar reflectance, which can be applied to passive daytime radiative cooling. The combination of physical vapor deposition and spin-coating prepared the samples, which were also characterized experimentally by spectrometers. On-site measured results show that the emitter can effectively achieve daytime radiative cooling, and the cooling performance can be further improved with the increase of the ambient air temperature. When the emitter is exposed to direct solar radiation (AM1.5) of about 880 W/m² on a rooftop under dry air conditions, it can achieve an average temperature reduction of about 12.6 °C from the ambient air temperature with nonradiative heat transfer (11 a.m.–1 p.m.). Theoretical simulations reveal that the emitter can still have a certain cooling performance in the presence of significant nonradiative heat exchange and nonideal atmospheric conditions. The influence of ambient air temperature on the cooling performance of the emitter is also theoretically analyzed.

Microscale lenses are mostly used as near-sighted lenses. The far-field imaging properties of a microscale spherical lens, where the lens is spatially separated from the object, are experimentally studied. Our experimental results show that, for a blu-ray disc (an object) whose spacing is 300 nm, the lens can magnify the stripe patterns of the disc when the lens is spatially separated from the object. In the experimentally tested range (0–14 μm), all the magnified images are virtual images. When the distance is increased from 0 to 14 μm the magnification decreases from $1.47\times$ to $1.20\times$ and the field of view increases from 3.8 to 12.2 μm. The image magnification cannot be described by standard geometrical optics.

The imaging properties of BaTiO₃ glass (BTG) microspheres in the diameter range of 5–50 µm which are fully immersed in a polydimethylsiloxane layer are experimentally studied. Our experimental results show that for both Blu-ray disc samples and the single-layer hexagonally close-packed microsphere array samples, with the increase of the diameter of BTG microspheres, the range of focal image positions (RFIP) increases linearly. When the diameter of BTG microspheres increases from 5 to 50 μm, the RFIP changes from 4 to 25 μm. For the microsphere array samples, Talbot effect is observed, and both the position of Talbot images and the Talbot distance depend on the diameter of BTG microspheres. Numerical simulations indicate that the length of the photonic nanojet changes from 2.9 to 7.1 μm when the BTG microsphere size increases from 5 to 50 μm, and the calculated RFIP is between 6 and 24 μm. The calculated RFIPs match well with the experimental ones. Our researches reveal that the RFIP depends on the length of the photonic nanojet of the BTG microsphere.

Microsphere-assisted imaging is an extraordinary simple technology that can obtain optical super-resolution under white-light illumination. Here, we introduce a method to improve the resolution of a microsphere lens by increasing its numerical aperture. In our proposed structure, BaTiO₃ glass (BTG) microsphere lenses are semi-immersed in a S1805 layer with a refractive index of 1.65, and then, the semi-immersed microspheres are fully embedded in an elastomer with an index of 1.4. We experimentally demonstrate that this structure, in combination with a conventional optical microscope, can clearly resolve a two-dimensional 200-nm-diameter hexagonally close-packed (hcp) silica microsphere array. On the contrary, the widely used structure where BTG microsphere lenses are fully immersed in a liquid or elastomer cannot even resolve a 250-nm-diameter hcp silica microsphere array. The improvement in resolution through the proposed structure is due to an increase in the effective numerical aperture by semi-immersing BTG microsphere lenses in a high-refractive-index S1805 layer. Our results will inform on the design of microsphere-based high-resolution imaging systems.