Jiansheng Yang

Dr. Jiansheng Yang


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2022 in Measurement Science Review
Verified
Journal Article
Open access
PDF file
HYHao Yang
Hao Yang
YFYuwen Fu
Yuwen Fu
JYJiansheng Yang
Jiansheng Yang
Flame combustion diagnostics is a technique that uses different methods to diagnose the flame combustion process and study its physical and chemical basis. As one of the most important parameters of the combustion process, the flame equivalence ratio has a significant influence on the entire flame combustion, especially on the combustion efficiency and the emission of pollutants. Therefore, the measurement of the flame equivalence ratio has a huge impact on efficient combustion and environment protection. In view of this, several effective measuring methods were proposed, which were based on the different characteristics of flames radicals such as spectral properties. With the rapid growth of machine learning, more and more scholars applied it in the combustion diagnostics due to the excellent ability to fit parameters. This paper presents a review of various measuring techniques of hydrocarbon flame equivalent ratio and the applications of machine learning in combustion diagnostics, finally making a brief comparison between different measuring methods.

1 February 2023 in Measurement Science Review
Verified
Journal Article
Open access
PDF file
HYHao Yang
Hao Yang
YLYufeng Lai
Yufeng Lai
XLXuanqi Liu
Xuanqi Liu
HJHoushi Jiang
Houshi Jiang
JYJiansheng Yang
Jiansheng Yang
Equivalence ratio (Φ) is one of the most important parameters in combustion diagnostics. In previous studies, flame color characteristics have been widely applied to model the Φ of premixed hydrocarbon flames. The flame spatial characteristics also change with the varying Φ. In this paper, a high-speed color camera was employed to capture the premixed propane flame images under different Φ conditions (Φ = 0.93 to 1.53). Then, the relationship between the spatial characteristics and the Φ variation was investigated. The area and height of propane premixed flames perform a strong sensitive response to the Φ variation. Based on the research above, the Φ measurement models were constructed using color and spatial characteristics. A comparison was made between the color characteristics (Color-Φ) model and the color-spatial characteristics (Multi-dimensional-Φ) model. Both models were applied to a set of color images of a premixed propane flame, and the result indicates that the Multi-dimensional-Φ model performs with higher accuracy.

11 September 2021
Verified
Book Chapter
Open access
PDF file
YWYifei Wang
Yifei Wang
YWYisen Wang
Yisen Wang
JYJiansheng Yang
Jiansheng Yang
ZLZhouchen Lin
Zhouchen Lin
Recently, sampling methods have been successfully applied to enhance the sample quality of Generative Adversarial Networks (GANs). However, in practice, they typically have poor sample efficiency because of the independent proposal sampling from the generator. In this work, we propose REP-GAN, a novel sampling method that allows general dependent proposals by REParameterizing the Markov chains into the latent space of the generator. Theoretically, we show that our reparameterized proposal admits a closed-form Metropolis-Hastings acceptance ratio. Empirically, extensive experiments on synthetic and real datasets demonstrate that our REP-GAN largely improves the sample efficiency and obtains better sample quality simultaneously.

25 October 2024 in Sensors
Verified
Journal Article
Open access
PDF file
LZLukai Zheng
Lukai Zheng
TYTiantian Yang
Tiantian Yang
WLWenjia Liu
Wenjia Liu
YLYufeng Lai
Yufeng Lai
JYJiansheng Yang
Jiansheng Yang
This paper addresses the inherent limitations in traditional color modeling techniques for measuring the flame equivalence ratio (Φ), particularly focusing on the subjectivity involved in threshold settings and the challenges posed by uneven 2D color distribution. To overcome these issues, this study introduces an attention-based convolutional neural network (ACN) model, a novel approach that transcends the conventional reliance on B/G color features (Tf). The ACN model leverages adaptive feature extraction, augmented by a spatial attention mechanism, to more effectively analyze flame images. By amplifying key features, autonomously minimizing background noise, and standardizing variations in color distribution, the ACN model in this experiment achieved a prediction accuracy of 99%, with a 76% reduction in error rate compared to the original model, significantly improving the accuracy and objectivity of flame Φ measurement. This method marks a substantial development in the precision and reliability of flame analysis.

30 January 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
GCGuowei Chen
Guowei Chen
CCChenguang Cai
Chenguang Cai
Ming YangMing Yang
Ming Yang
DWDeguang Wang
Deguang Wang
CLChengbin Liang
Chengbin Liang
JYJiansheng Yang
Jiansheng Yang
The key dynamic parameters measurement of bridge structures is essential to their health monitoring and has been highly valued. However, the commonly used accelerometeror linear variable displacement transducer (LVDT)-based measurement methods have inevitably appeared the issues such as: measurement inconvenience, poor real-time performance, high cost, and low accuracy. In this study, a new monocular vision-based key dynamic parameters measurement method used for typical bridge structures health monitoring is proposed, which is capable of improving the performance with a commercial camera. This method combines the reliable camera calibration with a simple ring mark and improved sub-pixel Zernike moment edge extraction with linear ramp grayscale model to accurately measure the key dynamic parameters. The laboratorial comparison experiments with the current accelerometer-based method at different working conditions to measure the acceleration, frequency, and deflection at the mid-span of a self-built bridge model were performed. The maximum relative deviations of the acceleration amplitude, frequency and deflection measured in the mid-span between the accelerometer-based and proposed methods were 0.52%, 1.35% and 2.51%, respectively. Additionally, the comparison experiments on a practical bridge were also accomplished, and the results demonstrated the proposed method can obtain a considerable measurement performance.

14 April 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
HYHao Yang
Hao Yang
YLYufeng Lai
Yufeng Lai
XLXuanqi Liu
Xuanqi Liu
MDMatthew Davies
Matthew Davies
JWJon Willlmott
Jon Willlmott
JYJiansheng Yang
Jiansheng Yang
A simulation methodology was proposed to reconstruct color images under different camera spectral sensitivity functions ( CSSFs ) by integrating the hyperspectral images. Based on this proposed simulation method, the effects of different CSSFs , Bayer patterns, and demosaicing algorithms on color-modeled CH * and C2 * measurement have been investigated. Firstly, initial full-color images were reconstructed under the CIE 1931 XYZ matching function ( CMF ). Then, the Bayer pattern encoded images were obtained from the initial reconstructed images by removing the pixel values according to different Bayer patterns. Next, three different conventional demosaicing algorithms were employed to calculate the full interpolated color images, and last, the effects of demosaicing algorithms on color-modeled CH * and C2 * measurement were analyzed. It was found that the effects of Bayer patterns and demosaicing algorithms on color-modeled global equivalence ratio (Φ) measurement were limited, whereas the most significant impact is CSSF . Therefore, an improved color-modeled Φ measurement model was also proposed using a color correction algorithm under CMF , which may provide a quick, efficient, and generalized method for color-modeled Φ measurement.