Kamlesh Pandey

Dr. Kamlesh Pandey

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications


1 March 2021 in Water Resources
Verified
Journal Article
Closed access
PDF file
AAAmiya Abhash
Amiya Abhash
KPKamlesh Pandey
Kamlesh Pandey
Piano Key Weirs (PKW) is a free-flowing weir, and an improvement over the labyrinth weir family. PKW has higher discharge for the same head as compared to other types of weirs. They tend to reduce the upstream submergence in reservoirs or other flow systems and can be effectively used for flood risk mitigation. CFD studies have been carried out earlier but mostly for H/P (Total head to height ratio) greater than 0.1. The present paper investigates the use and validation of Computational Fluid Dynamics (CFD) for modeling Open Channel flows over common hydraulic structures such as PKW for small discharges with the entire range of head to height ratio h/P from 0.035 to 0.1, where h is not the total head upstream of PKW but the head measured at the crest of PKW. The numerical results have been validated with experimental results. Since the discharge is minimal surface tension force has been incorporated in the numerical model. The numerical model is a half PKW unit model with the same geometrical parameters as the experimental setup from Literature. The results show that CFD simulations can reproduce flow depths near PKW with reasonably good accuracy. The present paper compares the head obtained from CFD with that of empirical formula in the Literature but with head measured at the crest of PKW. Investigation of water surface profile and velocity profile near the upstream of PKW has also been carried out.

21 May 2020 in Ish Journal of Hydraulic Engineering
Verified
Journal Article
Closed access
AAAmiya Abhash
Amiya Abhash
KPKamlesh Pandey
Kamlesh Pandey
Dams fall in ‘installations containing dangerous forces’ because of their massive impact on the environment and civilian life and property as per International humanitarian law. As such, it becomes vital for hydraulic engineers to refurbish various solutions for dam rehabilitation. This paper presents a review of a new type of weir installation called Piano Key Weir (PKW), which is becoming popular around the world for its higher spillway capacity both for existing and new dam spillway installations. This paper reviews the geometry along with structural integrity, discharging capacity, economic aspects, aeration requirements, sediment transport and erosion aspects of Piano Key Weir (PKW) as compared with other traditional spillway structures and alternatives from literature. The comparison with other alternatives shows PKW to be an excellent alternative for dam risk mitigation owing to its high spillway capabilities and economy, along with its use in both existing and new hydraulic structures.

1 November 2020 in Journal of Hydrologic Engineering
Verified
Journal Article
Closed access
PDF file
KPKeshav Pathak
Keshav Pathak
KPKamlesh Pandey
Kamlesh Pandey
VSV. P. Singh
V. P. Singh
A multitude of studies have derived one-dimensional velocity distributions, assuming open channels to be rectangular, and have extended their applications to rivers, canals, and other open channels. A cumulative distribution function (CDF) of velocity distribution is proposed based on a channel’s cross-sectional geometry. This paper derives a one-dimensional velocity distribution for wide rigid trapezoidal channels using the maximization of Shannon entropy and proposed CDF. Two new parameters, geometric parameter (a ), and linear weightage factor (k ), are introduced and the dependency of CDF on these two parameters is discussed. These two parameters take into account the cross-sectional geometry of the section and the location of flow velocity measured along the depth, respectively, and, hence, their contributions to velocity distribution, which were not considered when formulating Chiu velocity distribution. The proposed velocity distribution has been found to work significantly well, especially in the middle zone of channel depth, when compared to Chiu’s velocity distribution. This has been verified using experimental as well as river field data (assuming the river’s cross-section channel to be trapezoidal). The paper also explains the limitation of Chiu’s velocity distribution when applied to obtain the average flow velocity in trapezoidal channels. Further, the shear stress distribution (in vertical direction along the depth of channel perpendicular to flow direction) is also derived by entropy maximization based on channel geometry, and the relation of shear stress at the channel bed with bed width and cross-sectional area is established. Finally, the CDF formulation is also proposed for velocity distribution in exponential channels based on channel geometry.

31 March 2020 in Journal of Hydrology
Verified
Journal Article
Closed access
KPKamlesh Pandey
Kamlesh Pandey
AAAmiya Abhash
Amiya Abhash
RTRavi Prakash Tripathi
Ravi Prakash Tripathi