During the last quarter of 2019, the beaches, mangroves, and estuaries of Northeast Brazil received an unprecedented volume of crude oil from the sea, which became the worst environmental disaster ever to reach the Brazilian coast. The oil, having reached the shores completely unnoticed, left both society and government agents completely clueless on (i) where the oil was coming from; (ii) how much oil was still in the ocean to reach the shorelines; and (iii) which beaches were going to be affected next! By exploring remote sensing data and ocean numerical modeling, along with oil dispersion chemistry on sea water, this study investigates the possible origin and path of the spill and whether it could have been detected from space. The oil dispersion modeling simulations performed for this investigation revealed a possible region and timing of the oil spill, also indicating the likelihood of it being advected toward the shoreline under the ocean surface.
Satellite synthetic aperture radar (SAR) images are recognized as one of the most efficient tools for day/night, all weather and large area monitoring of ships at sea. However, false alarms discrimination is still one key problem on SAR ship detection. While many discrimination techniques have been proposed for the treatment of false alarms, not enough emphasis has been targeted to explore how obtained false alarms are related to the changing ocean environmental conditions. To this end, we combined a large set of Sentinel-1 SAR images with ocean surface wind and wave data into one dataset. SAR images were separated into three distinct groups according to wave age (WA) conditions present during image acquisition: young wind sea, old wind sea, and swell. A constant false alarm rate (CFAR) ship detection algorithm was implemented based on the generalized gamma distribution (GΓD). Kolmogorov–Smirnov distance was used to analyze the distribution goodness-of-fit among distinct ocean environments. A backscattering analysis of different sizes of ship targets and sea clutter was further performed using the OpenSARShip and automatic identification system (AIS) datasets to assess its separability. We derived a discrimination threshold adjustment based on WA conditions and showed its efficacy to drastically reduce false alarms. To our present knowledge, the use of WA as part of the CFAR and for the adjustment of the threshold of detection is a novelty which could be tested and evaluated for different SAR sensors.
22 May 2015 in IEEE Journal of Oceanic Engineering
In this paper, target at sea detection is addressed using hybrid-polarity (HP) synthetic aperture radar (SAR) architecture. Wave polarimetry concepts are used to define HP features that are used to observe targets at sea. The sensitivity of HP features to both targets and the surrounding environment is analyzed through a novel objective norm, namely the Relative Sensitivity for Polarimetric Features (RSPolF) index. Detection performance is evaluated by the novel Dependency of Sea state and Target (DoST) surface characteristics metric, and by the well-known Figure of Merit (FoM). Experiments undertaken on HP measurements emulated from Radarsat-2 and ALOS-PALSAR full-polarimetric actual SAR data demonstrate the effectiveness of the proposed HP approach and the different sensitivity of HP features to targets and background sea characteristics. Following those results, a ranking of the HP features performance is proposed which mainly highlights that HP features complement each other in the detection process. Finally, a constant false alarm rate (CFAR) approach is proposed to exploit two HP features for target detection in an unsupervised way.
Maritime surveillance has become increasingly relevant due to the growth of shipping, illegal fishing, and the need to monitor remote oceanic regions. Synthetic Aperture Radar (SAR) imagery supports this task under day-and-night and almost all-weather conditions. However, automatic ship detection in heterogeneous ocean environments still faces challenges, especially regarding computational cost. This study develops and compares approaches for detecting vessels in SAR imagery using radar backscatter statistics () to identify and characterize maritime targets. The OpenSARShip 2.0 dataset, which provides ship samples with AIS-based validation and reliable estimates by type and size, was combined with maritime physical parameters such as wave age (from ERA5 reanalysis). The objective is to combine fast processing, robustness to sea variability, and inference capability regarding target size for operational applications. Four algorithms were evaluated: Rapid Thresholding (RT), based on OpenSARShip values by ship length; Adjusted Rapid Thresholding (ART), with clutter-adapted thresholds; CFAR GD, based on Gamma pdf modeling of ocean clutter; and a Hybrid Strategy combining RT with CFAR GD. Results showed that CFAR GD achieved the highest recall (87.4%) but at high computational cost, while the Hybrid Strategy (HS) offered comparable performance (Recall: 86.6%; F1-score: 74.8%) with 18× faster execution time. RT and ART were faster but less sensitive. These findings highlight the HS as an efficient compromise, supporting scalable, near-real-time vessel detection systems.
Extensive Brazilian coast and a growing up maritime vessel traffic lead to research better ancillary methods to control ship's flow. Orbital SAR imagery is an important tool, especially due to its ability to work day and night and clouds coverage doesn't interfere often. At present study, some well-known ship detection concepts are investigated, applying them to TerraSAR-X (TSX) ScanSAR images (16 m resolution), in VV and HH polarization. Statistical parameters are estimated and trough Kolmogorov-Smirnov test K-distribution fit to TSX images is checked. Algorithm detection based on Constant False Alarm Rate (CFAR) concept is applied and its performance is verified. Incidence angle, CFAR's windows size and Probability of False Alarm (PFA) influence are further analysed. Finaly, we discuss some operational issues about near-real-time image delivery and the delay impact on a surveillance system or on an urgency request.