Considering the computational complexity and fronthaul capacity requirements of network-wide centralized optimization for Cell-free (CF) massive multiple input multiple output (MIMO) networks, we focus on user-centric (UC) networks wherein each user is served by a subset of access points (APs) rather than all the APs. We study a proportional-fair resource allocation (RA) problem, including slot resource allocation and precoding design in UC networks over consecutive time-slots. We formulate the proportional-fair (PF) resource allocation problem as a series of weighted sum-rate maximization problems and develop a two-stage heuristic RA scheme to solve the problem. The scheme adopts a user grouping process to decompose resource allocation problem into intra-group orthogonal resource allocation sub-problems. A modularity-based user grouping algorithm upon a constructed weighted digraph is proposed. Then, relying on the grouping results, a parallel distributed PFRA algorithm consisting of user selection process and a Signal to Leakage plus Noise Ratio (SLNR)-based precoding design is proposed to fulfil intra-group resource allocation. Rather than global channel state information (CSI) collected from the whole network, local CSI obtained cooperatively within each AP subset is utilized in the proposed resource allocation scheme. Numerical results confirm that the proposed RA scheme outperforms in throughput while maintaining comparable fairness among users.

The newly emerging federated learning (FL) framework offers a new way to train machine learning models in a privacy-preserving manner. However, traditional FL algorithms are based on an event-triggered aggregation, which suffers from stragglers and communication overhead issues. To address these issues, in this paper, we present a time-triggered FL algorithm (TT-Fed) over wireless networks, which is a generalized form of classic synchronous and asynchronous FL. Taking the constrained resource and unreliable nature of wireless communication into account, we jointly study the user selection and bandwidth optimization problem to minimize the FL training loss. To solve this joint optimization problem, we provide a thorough convergence analysis for TT-Fed. Based on the obtained analytical convergence upper bound, the optimization problem is decomposed into tractable sub-problems with respect to each global aggregation round, and finally solved by our proposed online search algorithm. Simulation results show that compared to asynchronous FL (FedAsync) and FL with asynchronous user tiers (FedAT) benchmarks, our proposed TT-Fed algorithm improves the converged test accuracy by up to 12.5% and 5%, respectively, under highly imbalanced and non-IID data, while substantially reducing the communication overhead.

Applying integrated sensing and communication (ISAC) to a cell-free massive multiple-input-multiple-output (CF mMIMO) architecture has attracted increasing attention. This approach equips CF mMIMO networks with sensing capabilities and resolves the problem of unreliable service at cell edges in conventional cellular networks. However, existing studies on cell-free ISAC (CF-ISAC) systems have focused on the application of traditional integrated signals. To address this limitation, this study explores the employment of the orthogonal time frequency space (OTFS) signal as a representative of innovative signals in the CF-ISAC system, and the system’s overall performance is optimized and evaluated. A universal downlink spectral efficiency (SE) expression is derived regarding multiantenna access points (APs) and optional sensing beams. To streamline the analysis and optimization of the CF-ISAC system with the OTFS signal, we introduce a widely applicable approximation on the achievable SE. Based on this, an AP mode selection algorithm is developed to dynamically adapt to network requirements, and a power allocation algorithm is proposed to maximize the minimum communication signal-to-interference-plus-noise ratio (SINR) of users while ensuring a specified sensing SINR value. The results demonstrate the tightness of the proposed approximation and the efficiency of the proposed algorithms. Finally, the superiority of using the OTFS signals is verified by a 13-fold expansion of the SE performance gap over the application of orthogonal frequency division multiplexing signals. These findings could guide the future deployment of the CF-ISAC systems, particularly in the field of millimeter waves with a large bandwidth.

Cell-free massive multiple-input--multiple-output (MIMO) (CF-mMIMO) is a distributed massive MIMO network architecture, which leads to a better ability to resist shadow fading than centralized massive MIMO. When network slicing is applied to CF-mMIMO networks in order to serve multiple tenants, the deployment flexibility of CF-mMIMO networks could be further improved. Nevertheless, how to effectively allocate resources in network slicing based CF-mMIMO networks is still a challenging problem to be tackled. In this article, we present a novel resource allocation scheme for network slicing based multi-tenant CF-mMIMO networks to maximize the infrastructure operator’s revenue while maintaining the quality of network services. Specifically, the resource allocation scheme is first formulated as an optimization problem, which is NP-hard and nonconvex. Then, the problem is decomposed into two subproblems. For the first subproblem, we propose a joint user clustering and power control coefficient allocation algorithm, which not only maintains fairness among users but also improves the access rate of CF-mMIMO networks. For the second subproblem, the interior-point method is adopted. In our article, extensive simulations are carried out to prove the effectiveness of the proposed resource allocation scheme. Our experimental results indicate that the proposed scheme leads to a lower outage probability and a higher infrastructure provider’s revenue than existing approaches.

Cell-free (CF) massive multiple-input multiple-output (mMIMO) is a promising technology to enhance the spectrum efficiency in future wireless systems by leveraging distributed access points (APs) to jointly serve the users over the same time-frequency resource. However, for uplink communications under orthogonal frequency division multiplexing (OFDM), the signals received at different APs from different users are generally asynchronous, due to the varying distances between the APs and users. In this paper, we study the performance of CF mMIMO-OFDM wireless system under asynchronous signal reception in terms of uplink channel estimation and achievable spectral efficiency. In particular, we devise the minimum mean square error (MMSE) channel estimation under asynchronous reception and reveal how the phase shift, inter-symbol interference, and inter-carrier interference introduced by asynchronous reception destroy the orthogonality between different pilot sequences at the APs. In addition, given the imperfect channel state information caused by pilot contamination and asynchronous reception, we obtain closed-form expressions for the uplink achievable rate for both centralized and distributed operations. We show that for both operations, the uplink achievable rates under asynchronous reception are much smaller than those under synchronous reception due to the phase shift caused by asynchronous reception. Last, numerical results demonstrate that under asynchronous reception, the maximum sum-rate loss with MMSE and maximum ratio (MR) combining in centralized and distributed operations reach 29.5%, 4%, 45.4% and 8%, respectively. This indicates that while MMSE combining is much more sensitive to asynchronous reception than MR combining, it still achieves a higher achievable rate.

The pinching-antenna system (PASS) reconstructs wireless channels through pinching beamforming, i.e., optimizing the activated locations of pinching antennas (PAs) along the waveguide. The aim of this article is to investigate the joint design of baseband beamforming and pinching beamforming. A low-complexity element-wise sequential optimization framework is proposed to address the sum-rate maximization problem in PASS-enabled downlink and uplink channels. i) For the downlink scenario, maximum ratio transmission (MRT), zero-forcing (ZF), and minimum mean square error (MMSE) beamforming schemes are employed as baseband beamformers. For each beamformer, a closed-form expression for the downlink sum-rate is derived as a single-variable function with respect to the pinching beamformer. Based on this, a sequential optimization method is proposed, where the positions of the PAs are updated element-wise using a low-complexity one-dimensional search. ii) For the uplink scenario, signal detection is performed using maximum ratio combining (MRC), ZF, and MMSE combiners. A closed-form sum-rate expression is derived for each linear combiner, and a similar element-wise design is applied to optimize the pinching beamforming. Numerical results are provided to validate the effectiveness of the proposed method and demonstrate that: (i) For all considered linear beamformers, the proposed PASS architecture outperforms conventional fixed-antenna systems in terms of sum-rate performance; (ii) in both downlink and uplink channels, ZF achieves performance close to that of MMSE and significantly outperforms MRT or MRC; and (iii) the proposed element-wise design eliminates the need for alternating updates between the baseband and pinching beamformers, thereby ensuring low computational complexity.