The present work investigated the degradation of a dyeing factory effluent by advanced oxidative process under UV irradiation. TiO2 and ZnO were used as catalysts and the influence of different concentrations of H2O2 added to the system was studied. The catalysts were characterized in terms of crystal structure (X-ray diffraction), textural properties (Brunauer–Emmett–Teller area and pore volume) and point of zero charge, which indicated the semiconductors had a positively charged surface in an acidic medium. After 8 h of irradiation at pH 3.0 and catalyst concentration of 0.0625 g L−1, the effect of H2O2 was evaluated by means of kinetic efficiency (rate constants), absorbance reduction (at 284, 621 e 669 nm), total organic carbon reduction and mineralization (in terms of the formation of ions such as and ). Adding H2O2 to the photocatalytic system significantly increased pollutants’ removal, highlighting tests with 1.0 × 10−2 mol L−1, showing higher absorbance reduction and rate constants at 621 and 669 nm for TiO2 and best mineralization rates for ZnO. Ecotoxicity bioassays using Artemia salina L confirmed the treatment efficacy, with effluent lethal concentration (LC50) increasing from 65.68% (in natura) to over 100% after photocatalysis treatment.
The aim of this study was to assess the efficiency of mucilage extracted from the fruit of Dillenia indica at benefiting coagulation for the treatment of textile effluent. The mucilage extraction was carried out in water at room temperature with optimization of factors of pH, concentration of coagulant FeCl3.6H2O, and concentration of mucilage solution through the planning of the star-type central compound. We were able to analyze the synergistic effects between the FeCl3.6H2O mucilage concentrations in which the process of coagulation\flocculation (CF) for the removal of the chemical oxygen demand (COD) is more significant at a low chemical coagulant concentration (8.00 mg L−1) and a higher natural coagulant concentration (NC) (15.00 mg L−1) demonstrating the potential of this mucilage to treat textile effluents with a COD removal of 67.66%%, 96.86% of turbidity removal and reduced 91,12% of apparent color. The characterization of the mucilage of Dillenia indica was done through Fourier Transform Infrared Spectroscopy (FTIR) and Nuclear Magnetic Resonance of 13C in the solid state (13C NMR), where the signals obtained indicate the presence of polysaccharides, which are responsible for accentuating the CF process.
26 May 2012 in Environmental Monitoring and Assessment
Este trabalho teve como objetivo reduzir o volume de água e quantidade de corantes gastos durante o processo industrial de tingimento de malhas de algodão através da reutilização dos corantes e sal que são normalmente descartados dissolvidos como efluente após o processo. Depois de quantificados os corantes, a solução final tinha seu volume e concentração de corantes ajustados aos parâmetros iniciais e um novo banho de tingimento foi realizado. Os tecidos foram submetidos a métodos estatísticos de análise sensorial para comprovar quantos banhos sucessivos poderiam ser realizados mantendo-se a qualidade do tingimento (relativa à cor). Para malhas tingidas com apenas um corante, foram realizados cinco banhos de tingimento, mantendo a qualidade em relação à cor por quatro banhos consecutivos. A malha tingida com a mistura binária permitiu a realização de quatro banhos sem diferenças significativas entre as amostras obtidas.