The use of electroactive polyaniline (PANI) as an electrode material for a symmetric supercapacitor has been reported. The material was synthesized via interfacial polymerization, using ammonium per sulfate, dodecylbenzene sulfonic acid (DBSA), and gasoline, respectively, in the oxidant, dopant, and novel organic phase, and was subsequently employed as an electrode material to design a binder-free symmetric capacitor. As properties of PANI rely on the method of synthesis as well as reaction parameters, the present combination of reactants, at pre-optimized conditions, in the interfacial polymerization, led to the formation of PANI exhibiting a high specific capacitance (712 Fg−1 at 0.5 Ag−1), a good rate capability (86% capacitance retention at 10 Ag−1), a very low solution resistance (Rs = 0.61 Ω), and a potential drop (IR = 0.01917 V). The device exhibited a high energy density of 28 Whkg−1, at a power density of 0.28 kWkg−1, and retained as high as 15.1 Whkg−1, at a high power density of 4.5 kWkg−1. Moreover, it showed an excellent cycling stability and retained 98.5% of coulombic efficiency after 5000 charge discharge cycles, without showing any signs of degradation of polymer.
Buildings account for a large portion of global energy consumption, driving the need for smart windows that can dynamically regulate solar heat. Two-dimensional (2D) thermochromic perovskites offer promising stability, but their practical application is limited by high transition temperatures and modest solar modulation ability. Here, we employ halide engineering via systematic Br/Cl doping in the 2D perovskite Tha2MAPbI4 (TMPI) to decouple and optimize these key properties. A systematic Br/Cl doping was conducted in TMPI and established a detailed composition-property database. It is found that optimal Cl doping (I: Cl=4:1) enhances the solar modulation ability (Δτsol) to 27.7%, while Br doping effectively lowers the transition temperature to near 40 °C. Spectroscopic analyses correlate these improvements with doping-induced bandgap widening and structural changes. Most importantly, first-principles calculations reveal that enhanced water adsorption energy on doped perovskite surfaces governs the reduced transition temperature and faster response kinetics. A real-world model house demonstration confirms the superior cooling performance of the optimized smart window. This work provides not only high-performance material candidates but also a fundamental mechanistic framework for developing energy-efficient, responsive smart windows.