Jesús Galán López

Dr. Jesús Galán López

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 July 2024 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
JOJhon Ochoa-Avendaño
Jhon Ochoa-Avendaño
KSK. Sedighiani
K. Sedighiani
JLJesús Galán López
Jesús Galán López
CBC. Bos
C. Bos
LKLeo Kestens
Leo Kestens

16 September 2020 in Crystals
Verified
Journal Article
Open access
PDF file
JLJesús Galán López
Jesús Galán López
Javier HidalgoJavier Hidalgo
Javier Hidalgo
Crystal plasticity models attempt to reproduce the complex deformation processes of polycrystalline metals based on a virtual representation of the real microstructure. When choosing this representation, a compromise must be made between level of detail at the local level and statistical significance of the aggregate properties, also taking into account the computational cost of each solution. In this work, the correlation between crystallographic orientation and grain size is considered in the definition of virtual microstructures for the simulation of the mechanical behavior of AISI 420 stainless steel (consisting of a ferrite matrix with large carbide precipitates), in order to improve the accuracy of the solution without increasing model complexity or computation time. Both full-field (DAMASK) and mean-field models (Visco Plastic Self Consistent (VPSC)) are used together in combination with experimental results to study the validity of the assumptions done in each of the models.

1 February 2021 in Journal of Applied Crystallography
Verified
Journal Article
Open access
PDF file
JLJesús Galán López
Jesús Galán López
LKLeo Kestens
Leo Kestens
Two of the microstructural parameters most influential in the properties of polycrystalline materials are grain size and crystallographic texture. Although both properties have been extensively studied and there are a wide range of analysis tools available, they are generally considered independently, without taking into account the possible correlations between them. However, there are reasons to assume that grain size and orientation are correlated microstructural state variables, as they are the result of single microstructural formation mechanisms occurring during material processing. In this work, the grain size distribution and orientation distribution functions are combined in a single multivariate grain size orientation distribution function (GSODF). In addition to the derivation of the function, several examples of practical applications to low carbon steels are presented, in which it is shown how the GSODF can be used in the analysis of 2D and 3D electron backscatter diffraction data, as well as in the generation of representative volume elements for full-field models and as input in simulations using mean-field methods.

12 January 2020 in Metals
Verified
Journal Article
Open access
PDF file
BSBehnam Shakerifard
Behnam Shakerifard
JLJesús Galán López
Jesús Galán López
LKLeo Kestens
Leo Kestens
The third generation of advanced high strength steels shows promising properties for automotive applications. The macroscopic mechanical response of this generation can be further improved by a better understanding of failure mechanisms on the microstructural level and micro-mechanical behavior under various loading conditions. In the current study, the microstructure of a multiphase low silicon bainitic steel is characterized with a scanning electron microscope (SEM) equipped with an electron backscatter diffraction detector. A uniaxial tensile test is carried out on the bainitic steel with martensite and carbides as second phase constituents. An extensive image processing on SEM micrographs is conducted in order to quantify the void evolution during plastic deformation. Later, a new post-mortem electron backscatter diffraction-based method is introduced to address the correlation between crystallographic orientation and damage initiation. In this multiphase steel, particular crystallographic orientation components were observed to be highly susceptible to micro-void formation. It is shown that stress concentration around voids is rather relaxed by void growth than local plasticity. Therefore, this post-mortem method can be used as a validation tool together with a crystal plasticity-based hardening model in order to predict the susceptible crystallographic orientations to damage nucleation.

30 June 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJesús Galán López
Jesús Galán López
BSBehnam Shakerifard
Behnam Shakerifard
JOJhon Ochoa-Avendaño
Jhon Ochoa-Avendaño
LKLeo Kestens
Leo Kestens
This work presents an advanced crystal plasticity model for the simulation of the mechanical behavior of multiphase advanced high-strength steels. The model is based on the Visco-Plastic Self-Consistent (VPSC) model and uses information about the material’s crystallographic texture and grain morphology together with a grain constitutive law. The law used here, based on the work of Pantleon, considers how dislocations are created and annihilated, as well as how they interact with obstacles such as grain boundaries and inclusions (carbides). Additionally, strain rate sensitivity is implemented using a phenomenological expression derived from literature data that does not require any fitting parameter. The model is applied to the study of two bainitic steels obtained by applying different heat treatments. After fitting the required parameters using tensile experiments in different directions at quasi-static and high strain rates, formability properties are determined using the model for the performance of virtual experiments: uniaxial tests are used to determine r-values and stress levels and biaxial tests are used for the calculation of yield surfaces and forming limit curves.

24 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
MVMartina Vittorietti
Martina Vittorietti
Javier HidalgoJavier Hidalgo
Javier Hidalgo
JLJesús Galán López
Jesús Galán López
Jilt SietsmaJilt Sietsma
Jilt Sietsma
GJGeurt Jongbloed
Geurt Jongbloed
This study proposes a new approach to determine phenomenological or physical relations between microstructure features and the mechanical behavior of metals bridging advanced statistics and materials science in a study of the effect of hard precipitates on the hardening of metal alloys. Synthetic microstructures were created using multi-level Voronoi diagrams in order to control microstructure variability and then were used as samples for virtual tensile tests in a full-field crystal plasticity solver. A data-driven model based on Functional Principal Component Analysis (FPCA) was confronted with the classical Voce law for the description of uniaxial tensile curves of synthetic AISI 420 steel microstructures consisting of a ferritic matrix and increasing volume fractions of M23C6 carbides. The parameters of the two models were interpreted in terms of carbide volume fractions and texture using linear mixed-effects models.