This study examined the effect of five chemically different recycling agents on the long-term performance and moisture sensitivity of modified aged asphalt binder. A control base binder was made from 35% virgin binder and 65% binder exposed to extended laboratory aging. Samples of this control base binder were modified by a recycling agent in one of five categories: paraffinic oil, aromatic extracts, naphthenic oil, triglycerides/fatty acids, and tall oil. Then these modified binders and the control base binder were evaluated under each of four different conditions: no aging, standard aging, extended aging, and severe aging. The resistance to cracking at low and mid-range temperatures was determined using a bending beam rheometer and a dynamic shear rheometer. In addition, the Wilhelmy plate test was performed on the unaged binders to estimate the binders’ resistance to moisture damage. The results indicated that the samples modified with recycling agents that contain carbonyl, hydroxyl, and sulfonyl groups did not comply with the low-temperature cracking criterion ( -value) after the extended aging process. Samples modified with recycling agents containing paraffinic and naphthenic oils, which have a high saturate content, showed the weakest long-term performance, while the performance of the aromatic extract recycling agent was superior, even after the extended aging process. The Wilhelmy plate test showed that recycling agents based on triglycerides/fatty acids or tall oil decreased both the cohesive and adhesive strengths of the samples more than other recycling agents, which might be related to the presence of a hydroxyl group in their structures.
1 May 2020 in Journal of Materials in Civil Engineering
Modification of aged binders by the use of recycling agents is significantly influenced by the chemical compositions of these agents. Despite the widespread use of recycling agents, the effect of their chemical properties on the modification process of aged binders cannot be fully found by referencing the reported studies. Recently, the National Center for Asphalt Technology (NCAT) categorized the recycling agents in five main groups. This paper addresses the chemical characteristics of recycling agents in each group by employing saturate, aromatic, resin, and asphaltene (SARA) analysis, Fourier-transform infrared spectroscopy (FT-IR), and elemental analysis. The test results and analyses revealed that the aromatic extracts were similar in chemical composition and bond with virgin unmodified binders. In addition, the results showed that the chemical nature of triglycerides/fatty acids and tall oils might increase the moisture susceptibility and accelerate the degradation of the asphalt binder. The SARA analysis indicated that the compatibility between paraffinic and naphthenic oils with the binder might be a concern; however, the level of oxygen content was low, and these agents did not contain chemical bonds sensitive to moisture and aging.
1 September 2018 in Journal of Materials in Civil Engineering
This study examined the effects of softening additives on the moisture susceptibility of recycled bituminous materials using chemical, mechanical, and imaging laboratory investigation methods. Two chemically different rejuvenators, one petroleum-tech (aromatic extracts) and one green-tech (tall oil), and an amine-based warm mix additive were selected as such softening additives. For chemical investigation, the two rejuvenators were examined using saturates-aromatics-resins-asphaltenes (SARA) analysis, Fourier-transform infrared (FT-IR) spectroscopy, thermogravimetric analysis coupled with FT-IR (TGA-IR), and nuclear magnetic resonance (NMR). Mechanically, a semicircular bending (SCB) fracture test was conducted to evaluate the moisture damage resistance of the recycled bituminous mixtures treated with the different rejuvenators and the warm mix additive. Laser scanning microscopy (LSM) was also used to acquire noncontact microscale topographical images to evaluate the effect of lower temperatures on aggregate-matrix interaction in the production of mixtures with the warm mix additive. The test-analysis results were then investigated to identify relationships between different features (i.e., chemical, mechanical, and topographical) of the mixtures associated with the different rejuvenators and the warm mix additive. Although additional data and investigations are still necessary to reach more definite conclusions, it appears that specific chemical functional groups in the rejuvenating agents are associated with the rejuvenated mixtures’ moisture sensitivity, and the lower production temperatures used in warm mixtures may lead to a somewhat more porous region between the aggregates and the matrix phase of recycled-rejuvenated bituminous mixtures.