Li-li Li

Dr. Li-li Li


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
YZYang Zhou
Yang Zhou
XDXinlian Duan
Xinlian Duan
Tao ChenTao Chen
Tao Chen
BYBo Yan
Bo Yan
LLLi-li Li
Li-li Li
The leaching residue of the lead–zinc sulfide tailing (LRT) is the only residue generated from the tailing leaching recovery process; it is a typical hazardous material for its high heavy-metal contents and high acidity. Due to the large output of LRT, and because its main components are Ca, Si, and Al, the preparation of building construction materials with LRT was studied. The results showed that when the LRT addition is less than 47%, with the ordinary Portland cement (OPC) and fly ash (FA) added and the curing conditions appropriate, the strength values of the tested specimens meet the M15 Class of the autoclaved lime sand brick standard (GB/T 16753-1997). The carbonization coefficient and drying shrinkage of the specimen were 0.79 and smaller than 0.42, respectively. As the SEM, TG, and XRD analysis have shown, the LRT can chemically react with additives to form stable minerals. The heavy metal contents that were leached out well met the limits in GB5085.3-2007. Based on the high addition of the LRT, the good strength and lower heavy metals were leached out of the prepared test specimen, and the tailing could be reused completely with the leaching recovery and the LRT reuse process. LRT can be used to replace OPC, allowing more sustainable concrete production and improved ecological properties of LRT.

17 June 2015 in Remote Sensing
Verified
Journal Article
Open access
PDF file
LLLi-li Li
Li-li Li
JYJingxue Yang
Jingxue Yang
Yunpeng WangYunpeng Wang
Yunpeng Wang
Satellite remote sensing offers an effective approach to estimate indicators of air quality on a large scale. It is critically significant for air quality monitoring in areas experiencing rapid urbanization and consequently severe air pollution, like the Pearl River Delta (PRD) in China. This paper starts with examining ground observations of particulate matter (PM) and the relationship between PM10 (particles smaller than 10 μm) and aerosol optical thickness (AOT) by analyzing observations on the sampling sites in the PRD. A linear regression (R2 = 0.51) is carried out using MODIS-derived 500 m-resolution AOT and PM10 concentration from monitoring stations. Data of atmospheric boundary layer (ABL) height and relative humidity are used to make vertical and humidity corrections on AOT. Results after correction show higher correlations (R2 = 0.55) between extinction coefficient and PM10. However, coarse spatial resolution of meteorological data affects the smoothness of retrieved maps, which suggests high-resolution and accurate meteorological data are critical to increase retrieval accuracy of PM. Finally, the model provides the spatial distribution maps of instantaneous and yearly average PM10 over the PRD. It is proved that observed PM10 is more relevant to yearly mean AOT than instantaneous values.

20 October 2021 in Processes
Verified
Journal Article
Open access
PDF file
YZYang Zhou
Yang Zhou
LLLi-li Li
Li-li Li
Cadmium (Cd) and lead (Pb) carry a high heavy-metal-toxic risk for both animals and plants in soil. In this study, iron-based biochar (T-BC) was prepared by co-pyrolysis using wastes of iron tailings and biomass with urea as the functioning agents. Field-emission scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and toxicity-characteristic leaching procedure (TCLP) methods were employed to analyze the physicochemical characteristics of T-BC. Additionally, a pot trial was conducted to examine the effects of T-BC on the physiological characteristics of pak choi (Brassica campestris L.), the availability of heavy metals, and enzyme activities in the soils. The results show that toxic metals have been volatilized by the roasting process and immobilized within T-BC via the formation of stable metal-compounds during the co-pyrolysis process, which satisfies the requirements of a soil passivator. Incubation experiments showed that the DTPA-extractable Cd and Pb in contaminated soils decreased with an increasing amendment rate. Moreover, in the pot experiments, by adding 1% (w/w) T-BC into soils, the soils benefited from its large adsorption, complex precipitation, and immobilization capacity. Approximately 36% Cd and 29% Pb concentrations of edible parts in pak choi were reduced. The amendment proved promising for the stabilization of Cd and Pb in contaminated soils, while providing a strategy for solving the residual waste of tailings and biomass.

28 June 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
LLLi-li Li
Li-li Li
ZMZhihui Mao
Zhihui Mao
JDJianjun Du
Jianjun Du
Tao ChenTao Chen
Tao Chen
LCLu Cheng
Lu Cheng
XWXiaocui Wen
Xiaocui Wen
COVID-19 control measures had a significant social and economic impact in Guangdong Province, and provided a unique opportunity to assess the impact of human activities on air quality. Based on the monitoring data of PM2.5, PM10, NO2, and O3 concentrations from 101 air quality monitoring stations in Guangdong Province from October 2019 to April 2020, the PSCF (potential source contribution factor) analysis and LSTM (long short-term memory) neural network were applied to explore the impact of epidemic control measures on air quality in Guangdong Province. Results showed that during the lockdown, the average concentration of PM2.5, PM10, NO2, and O3 decreased by 37.84%, 51.56%, 58.82%, and 24.00%, respectively. The ranges of potential sources of pollutants were reduced, indicating that air quality in Guangdong Province improved significantly. The Pearl River Delta, characterized by a high population density, recorded the highest NO2 concentration values throughout the whole study period. Due to the lockdown, the areas with the highest concentrations of O3, PM2.5, and PM10 changed from the Pearl River Delta to the eastern and western Guangdong. Moreover, LSTM simulation results showed that the average concentration of PM2.5, PM10, NO2, and O3 decreased by 46.34%, 54.56%, 70.63%, and 26.76%, respectively, which was caused by human-made impacts. These findings reveal the remarkable impact of human activities on air quality and provide effective theoretical support for the prevention and control of air pollution in Guangdong Province.

10 December 2018 in Water
Verified
Journal Article
Open access
PDF file
MWMinghui Wang
Minghui Wang
Tao ChenTao Chen
Tao Chen
BYBo Yan
Bo Yan
LLLi-li Li
Li-li Li
TCTao Chen
Tao Chen
Xianming XiaoXianming Xiao
Xianming Xiao
The adsorption of Cu (II) onto two typical types of pyrolytic sludge was investigated in this study. The examined conditions include pH, adsorption time, and temperature, as well as the dosage of adsorbents. Results show that the adsorbents removed the Cu (II) effectively. The adsorbent made from pyrolyzed paper mill sludge (CuMS) exhibited exceptional performance, with a removal efficiency of around 100%. Moreover, the adsorption of Cu (II) onto CuMS was not affected by pH in the range of 3–9. The kinetic data showed better conformation with the pseudo-second-order kinetic model, and the adsorption processes of the CuMS fit well to the Langmuir isotherm model. The adsorption capacity reached 4.90 mg·g−1 under appropriate conditions. Microscopic analysis and FT-IR analysis revealed that the adsorbent with porous structure and high monosilicate content was beneficial to Cu (II) adsorption. Thus, the CuMS is a potentially promising candidate for retaining Cu (II) in aqueous environments.

27 October 2019 in Advances in Polymer Technology
Verified
Journal Article
Open access
Tao ChenTao Chen
Tao Chen
BYBo Yan
Bo Yan
LLLi-li Li
Li-li Li
ZYZi-Ang Yan
Zi-Ang Yan
JWJun Wang
Jun Wang
Xianming XiaoXianming Xiao
Xianming Xiao
The separation and enrichment can be targeted to enrich in fly ash and reduce the cost of leaching and recovering of fly ash. Regarding their different properties, the single-component separation was used to obtain uncompleted burned carbon, glass microbeads, minerals, and other characteristic components from the ash. Also, the mineral composition of each component was analyzed by electron microscopy. The metal minerals were mainly concentrated in the mineral components. Besides, the electron probe microanalysis shows that the Pt content in the minerals of fly ash was significantly correlated with the metal contents of Ni and Cu. After the obtainment of the characteristics of fly ash metal enrichment, the heavy minerals with Cu, Ni, Pt, Pd, and other target metal elements were enriched by gravity separation and flotation. The enrichment coefficients of Cu, Ni, Pt, and Pd were 1.45, 1.33, 1.90, and 1.60, respectively, and the recovery rates were 77%, 81%, 97%, and 88%, respectively. Since the yield of heavy minerals obtained by separation was 62.24%, it indicated the physical separation method could significantly reduce the cost of leaching and recovering of fly ash metal resources.