Department of Food Engineering, Faculty of Chemical and Metallurgical Engineering, Davutpasa Campus, Yildiz Technical University, Istanbul 34349, Turkey
Dr. salih karasu
Department of Food Engineering, Faculty of Chemical and Metallurgical Engineering, Davutpasa Campus, Yildiz Technical University, Istanbul 34349, Turkey
Oils and fats are widely used in the food formulations in order to improve nutritional and some quality characteristics of food products. Solid fats produced from oils by hydrogenization, interesterification, and fractionation processes are widely used in different foodstuffs for these aims. In recent years, consumer awareness of relation between diet and health has increased which can cause worry about solid fat including products in terms of their high saturated fatty acid and trans fatty acid contents. Therefore, different attempts have been carried out to find alternative ways to produce solid fat with low saturated fatty acid content. One of the promising ways is using oleogels, structuring oils with oleogelators. In this review, history, raw materials and production methods of the oleogels and their functions in oleogel quality were mentioned. Moreover, studies related with oleogel usage in different products were summarized and positive and negative aspects of oleogel were also mentioned. Considering the results of the related studies, it can be concluded that oleogels can be used in the formulation of bakery products, breakfast spreads, margarines, chocolates and chocolate-derived products and some of the meat products.
This study aimed to investigate the effect of different drying methods, namely ultrasound-assisted vacuum drying (USV), vacuum drying (VD), and freeze-drying (FD), on the drying kinetics and some quality parameters of dried minced meat. In this study, USV was for the first time applied to the drying of minced meat. The USV and VD methods were conducted at 25 °C, 35 °C, and 45 °C. The different drying methods and temperatures significantly affected the drying time (p < 0.05). The USV method showed lower drying times at all temperatures. The rehydration values of the freeze-dried minced meat samples were higher than those obtained by the USV and VD techniques. The samples prepared using USV showed higher rehydration values than the vacuum dried samples for all temperatures. The effects of the different drying techniques and drying conditions on the microstructural properties of the minced meat samples were investigated using scanning electron microscope (SEM). The USV method resulted in higher porosity and a more open structure than the VD method. Total color differences (ΔE) for VD, USV, and FD were 8.27–20.81, 9.58–16.42, and 9.38, respectively, and were significantly affected by the drying methods and temperatures (p < 0.05). Higher drying temperature increased the ΔE value. Peroxide values (PV) significantly increased after the drying process, and samples treated with USV showed lower PV values than the VD treated samples. This study suggests that USV could be used as an alternative drying method for minced meat drying due to lower drying times and higher quality parameters.
This study aimed to evaluate the influence of sourdough fermentation on the estimated glycemic index (eGI), in vitro starch digestibility, and textural and sensory properties of eight experimentally prepared sourdough breads. Wheat and whole wheat flour bread samples were produced under different fermentation conditions (25 °C and 30 °C) and fermentation methods (type-1 and type-2). In type-1 fermentation, sourdough was obtained via spontaneous fermentation. Indigenous strains (Lactobacillus brevis ELB99, Lactiplantibacillus plantarum ELB75, and Saccharomyces cerevisiae TGM55) were used for type-2 fermentation. Fermentation type and temperature significantly affected eGI, the hydrolysis index (HI), the starch fraction, and the textural properties of the samples (p < 0.05). The resistant starch (RS) content increased after fermentation, while rapidly digestible starch (RDS), HI, and eGI decreased. RS values were significantly higher in type-2 than in type-1 at the same temperature for both flour types (p < 0.05). At 25 °C, RS values were higher in both fermentation types. In the white flour samples, eGI values were in the range of 60.8–78.94 and 62.10–78.94 for type-1 and type-2, respectively. The effect of fermentation type on eGI was insignificant (p < 0.05). In the whole flour samples, fermentation type and temperature significantly affected eGI (p < 0.05). The greatest eGI decreases were in whole wheat sourdough bread at 30 °C using type-2 (29.74%). The 30 °C and type-2 samples showed lower hardness and higher specific volume. This study suggests that fermentation type and temperature could affect the eGI and the textural and sensory properties of sourdough bread, and these factors should be considered during bread production. The findings also support the consumption of wheat and whole wheat breads produced by type-2 fermentation due to higher RS and slowly digestible starch (SDS) and lower RDS and eGI values.