Thin film organic lasers represent a new generation of inexpensive, mechanically flexible devices for spectroscopy, optical communications and sensing. For this purpose, it is desired to develop highly efficient, stable, wavelength-tunable and solution-processable organic laser materials. Here we report that carbon-bridged oligo(p-phenylenevinylene)s serve as optimal materials combining all these properties simultaneously at the level required for applications by demonstrating amplified spontaneous emission and distributed feedback laser devices. A series of six compounds, with the repeating unit from 1 to 6, doped into polystyrene films undergo amplified spontaneous emission from 385 to 585 nm with remarkably low threshold and high net gain coefficients, as well as high photostability. The fabricated lasers show narrow linewidth (105 pump pulses for oligomers with three to six repeating units) and wavelength tunability across the visible spectrum (408–591 nm).
The chemical synthesis of nanographene molecules constitutes the bottom-up approach toward graphene, simultaneously providing rational chemical design, structure-property control and exploitation of their semiconducting and luminescence properties. Here, we report nanographene-based lasers from three zigzag-edged polycyclic aromatics. The devices consist of a passive polymer film hosting the nanographenes and a top-layer polymeric distributed feedback resonator. Both the active material and the laser resonator are processed from solution, key for the purpose of obtaining low-cost devices with mechanical flexibility. The prepared lasers show narrow linewidth ( < 0.13 nm) emission at different spectral regions covering a large segment of the visible spectrum, and up to the vicinity of the near-infrared. They show outstandingly long operational lifetimes (above 105 pump pulses) and very low thresholds. These results represent a significant step forward in the field of graphene and broaden its versatility in low-cost devices implying light emission, such as lasers.
27 November 2012 in Journal of Materials Chemistry C
The aim of this work was to improve the laser performance, in terms of threshold and operational lifetime, of lasers based on polymer films doped with perylenediimide (PDI) derivatives as active media. For such purpose, we first investigated the amplified spontaneous emission (ASE) properties of perylene orange (PDI-O), when doped into polystyrene (PS) films. Lower ASE thresholds and larger photostabilities than those of similar films containing another PDI derivative (PDI-C6), recently reported in the literature, have been measured. Results have been interpreted in terms of the photoluminescence efficiency of the films, which depends on the type of molecular arrangement, inferred with the help of nuclear magnetic resonance experiments. We also show that PS films have a better ASE performance, i.e. lower thresholds and larger photostabilities, than those based on poly(methyl methacrylate), which was recently highlighted as one of the best matrixes for PDI-O. Finally, a one-dimensional second-order distributed feedback laser using PS doped with PDI-O was fabricated and characterized. This device has shown a threshold significantly lower (by around one order of magnitude) than that of a similar laser based on PDI-C6-doped PS.