Metal chalcogenides based on the C–M–M–C (C = chalcogen, M = metal) structure possess several attractive properties that can be utilized in both electrical and optical devices. We have shown that specular, large area films of γ-InSe and Sb2Se3 can be grown via atomic layer deposition (ALD) at relatively low temperatures. Optical (absorption, Raman), crystalline (X-ray diffraction), and composition (XPS) properties of these films have been measured and compared to those reported for exfoliated films and have been found to be similar. Heterostructures composed of a layer of γ-InSe (intrinsically n-type) followed by a layer of Sb2Se3 (intrinsically p-type) that display diode characteristics were also grown.
Single-crystal SiGe nanowires were synthesized via the vapour-liquid-solid (VLS) growth mechanism using disilane and germane as precursor gases. We have investigated the effect of temperature, pressure, and the inlet gas ratio on the growth and stoichiometry of Si(x)Ge(1-x) nanowires. The nanowires were characterized using scanning and transmission electron microscopies and energy dispersive x-ray analysis. It was found that nanowires with a Si:Ge ratio of about 1 had smooth surfaces, whereas departure from this ratio led to rough surfaces. Electrical properties were then investigated by fabricating back-gated field effect transistors (using a focused ion beam system) where single SiGe nanowires served as the conduction channels. Gated conduction was observed although resistance in the undoped devices was high.
We have employed first-principles density-functional calculations to study the electronic characteristics of covalently functionalized graphene by metal-bis-arene chemistry. It is shown that functionalization with M-bis-arene (M = Ti, V, Cr, Mn, Fe) molecules leads to an opening in the bandgap of graphene (up to 0.81 eV for the Cr derivative), and as a result, transforms it from a semimetal to a semiconductor. The bandgap induced by attachment of a metal atom topped by a benzene ring is attributed to modification of π-conjugation and depends on the concentration of functionalizing molecules. This approach offers a means of tailoring the band structure of graphene and potentially its applications for future electronic devices.
Fabrication of green light emitting ZnS:Tb thin film electroluminescent devices using atomic layer epitaxy is described. In this investigation, particular emphasis is placed on the effect of Tb doping profiles and concentrations on the emission characteristics. It is shown that rapid thermal anneal of these devices has a significant effect on their emission lifetimes.