Densely populated areas with large incoming populations have difficulty achieving high separate collection rates of municipal solid waste. The manuscript analyzes the link between biowaste collection and circular economy requirements as a fulfilment of the recycling rates and using biogas as a sustainable energy source. Three biowaste collection scenarios and three technical scenarios for its treatment are considered. The first scenario assumes only composting for biowaste treatment, the next includes also anaerobic digestion. In the years 2020–2050, the separate biowaste collection level will increase, depending on the scenario, from 26.9 kg/inh. up to 148.1kg/inh. By 2030, the quantity of biogas generated from biowaste can grow to almost 9 million m³/year, enabling the production of renewable energy at annual levels of almost 17 GWh and 69 TJ. Using the third scenario, the quantity of biogas generated grows more than twice (in 2035). If the capture rate of biowaste increases from 15% to 20% and then to 25%, the quantity of biogas generated grows by, respectively, 65% and more than 100%. Unfortunately, none of the scenarios enables the required municipal solid waste recycling rates in 2030 (60%) and 2035 (65%), which demonstrates the significant need to develop more effective separate collection systems, including biowaste. Methodology applied in the paper can be used for other cities and regions trying to meet circular economy demands.

Reducing the phenomenon of food waste and effective management of already wasted food in the form of post-consumer waste, included in the source-separated organic fraction of municipal solid waste (SS-OFMSW) from households and catering facilities, are some of the key challenges of the circular economy (CE), in particular in highly urbanized areas. The basis for the effective use of this waste is the knowledge of its physical and chemical properties. The main objective of the paper is to identify the key technological and organizational parameters for selective collection determining the characteristics of the SS-OFMSW and, consequently, the optimal path for its management. This paper presents the results of qualitative research of SS-OFMSW generated in the capital of Poland—Warsaw—coming from three sources: multi- and single-family housing and catering facilities. The collection efficiency of this waste was determined in the form of quality in container rate (QCR = 92–97%) and variability in terms of impurities and admixtures present in it (CV = 56–87%). High variability indicates that the system of selective waste collection in Warsaw is immature, which may hinder undertaking activities in the field of waste management planning. The study confirmed the suitability of the tested SS-OFMSW for organic recycling, especially using anaerobic digestion (AD), to which it is predisposed by water content, C/N, and biomethane potential (BMP). All tested food waste is characterized by a high yield of biogas in the range of 384–426 m³/Mg VS and an average share of methane in biogas at the level of 52–61%. Fertilizer properties, moisture, and its gas potential show little variability (CV ≤ 16%), which means that these data can be treated as stable data. The obtained results indicate the optimal direction for the collection and processing of SS-OFMSW based on post-consumer food waste in urbanized areas.

In a Medical Waste Management System (MWMS), logistic issues have a significant importance due to medical waste characteristics that have an influence on transport restrictions, storage possibilities and safety reasons. This paper focuses on logistic determinants in a MWMS, taking into account existing legal requirements, organizational factors and economic aspects (on the example of Poland). Problems associated with effective logistics are essential for the quality and safety of a MWMS and these issues seem to be still undervalued. In Poland, there is approximately 40 thousand waste generators and each year they produce on average 45 thousand tons of medical waste, of which more than 90% is classified as infectious. The biggest flow comes from hospitals and large health care units; other sources are private medical practices, research units, hospices and pharmacies. All units generating medical waste must comply with strict requirements for the collection, storage and disposal, particularly with regard to infectious waste. In view of the above, organizational structure should include goals and constraints of MWMS in order to implement them in real-world conditions The framework for sustainable operation of a MWMS is efficient logistics of waste and balance in the link between waste generation units and treatment facilities

This study aimed to assess the efficiency of removal of volatile organic compounds (VOCs) from process gases from a food industry plant in East Poland, producing high-quality animal (goose, duck, and pig) and vegetable fats, using a two-stage method which is a combination of biological purification and membrane-separation. The research, conducted on the semi-technical scale, compared the effects of traditional and two-stage biofiltration carried out under the same process conditions. The concentrations of VOCs in process gases were measured by means of a multi-gas detector. Additionally the temperature and humidity of gases were determined by a thermoanemometer under filter bed, following the EU and Polish National Standard Methods Two different types of filling materials (the mix of stumpwood chips and bark, and the mix of stumpwood chips, bark, and compost) and two types of membranes (three-layer semi-permeable membrane fabrics were used, with differences in air permeability and water tightness) were analyzed. During all processes basic operational parameters, the biofilters were controlled, including surface load, volumetric load, duration of gas contact with the filling layer, flow rate, and pressure drops (in the biofilter and on the membrane). The analyzed gases were characterized by very high variability of VOC concentrations (ranging from 350 ppb to 11,170 ppb). The effectiveness of VOC removal (RE_voc) was calculated by comparing the analytical results of raw and purified gases. The effectiveness of VOC removal with the application of traditional biofiltration during the experiment varied between 82% to 97% and was related to different parameters of the filling materials (mainly specific surface and moisture), reaching lower value for the mix of stumpwood chips and bark filling. The obtained results showed that the application of membrane improved the efficiency of biofiltration in all the analysed cases from 7% to 9%. The highest effectiveness was obtained using the filter bed in the form of stumpwood chips, bark, and compost in connection with the more permeable membrane. It was maintained between 96% to 99%, reaching an average value of 98%. The selection of the membrane should be determined by its permeability and the values of flow resistance.

This article outlines problems related to the location of facilities designed to treat the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion (AD) facilities are investigated as a treatment option, while taking into account the aspects of renewable energy generation. This research has been spurred on by the relationship between waste management, energy generation issues and spatial planning procedures. The analysis is focused on urban and semi-urban areas of medium and large cities. One of the most difficult issues associated with siting of waste processing plants is its integration with local infrastructures, avoiding conflicts and negative environmental impacts at the same time. This research aims to analyse possible locations for AD plants fuelled by OFMSW in Poland. Based on the experience gained from other countries and lessons learnt from the analysis of existing facilities in Europe, conditions for the location of this type of waste treatment plants have been defined, with the focus on economic, environmental and social issues. Most likely, the results of the multicriteria decision analysis for siting of municipal solid waste AD plants (M-BIST tool) could be transferred to other countries, especially those with a comparable GDP level and a similar framework for a waste management system.