New medium Mn steels for forged components, in combination with a new heat treatment, are presented. This new annealing process implies air-cooling after forging and austenite reversion tempering (AC + ART). This leads to energy saving compared to other heat treatments, like quenching and tempering (Q + T) or quenching and partitioning (Q + P). Furthermore, the temperature control of AC + ART is easy, which increases the applicability to forged products with large diameters. Laboratory melts distinguished by Ti, B, Mo contents have been casted and consecutively forged into semi-finished products. Mechanical properties and microstructure have been characterized for the AC and the AC + ART states. The as forged-state shows YS from 900 MPa to 1000 MPa, UTS from 1350 MPa to 1500 MPa and impact toughness from 15 J to 25 J. Through the formation of nanostructured retained metastable austenite an increase in impact toughness was achieved with values from 80 J to 100 J dependent on the chemical composition.
The transformation behavior and the mechanical properties of three laboratory produced steels are presented. To investigate the influence of copper contamination, the reference alloy 42CrMo4 is modified and alloyed with 0.5 and 1.0 wt% copper, respectively. The transformation behavior is investigated through dilatometry that yields continuous cooling transformation diagrams, while the mechanical properties are investigated by hardness measurements as well as Charpy‐V‐notch impact and tensile tests. Accompanying microstructure investigations by means of light optical, scanning electron, and transmissions electron microscopy and thermodynamic simulations (CALPHAD) are performed. It is demonstrated that copper contamination that will be unavoidable when increasing the overall steel recycling fraction may contain the potential for increasing the hardness as well the strength of standard high strength steels, although it is considered to be very detrimental during steel production. Together with reduced environmental footprints and production costs due to the utilization of lower grade scrap with more Cu‐contamination, the development of alternative processing routes for Cu‐contamination‐tolerant high strength steels is pursued.
The air‐hardening ductile forging steels belong to the third generation of advanced high‐strength steels and achieve their final, martensitic microstructure simply by air cooling from the forging heat. The present conference paper reviews the 15 years of development, different alloying strategies, and metallurgical throwbacks like manganese embrittlement. Furthermore, the most recent results concerning microstructure, mechanical properties, and cyclic material behavior obtained from an industrial trial melt are discussed together with the implications of these results on the carbon footprint (CF) and their impact on the resource efficiency of forged steel components. It is demonstrated that the CF of a steel product needs to be discussed on different levels, as the material‐, process‐, and product‐level contributions need to be considered. Furthermore, a case is made for new high‐strength steels in the context of circular economy, as increase fatigue resistance enables lightweighting potentials.
The mechanical properties after tempering and intercritical annealing of medium manganese steels with 4wt.‐% Mn for forging applications are presented. After forging with subsequent air cooling, heat treatments were performed, specifically tempering from 250∘C and 450∘C and intercritical annealing between 600∘C and 675∘C. Tensile properties, Charpy V‐notch impact toughness and hardness were determined and compared with microstructural features characterized by metallography and synchrotron measurements, leading to the classification of six different heat treatment stages for medium manganese steels. Furthermore, the effects of different alloying additions (boron 0.00160.0057wt.‐%, molybdenum 0.2wt.‐%, and aluminium 0.5wt.‐%) are discussed with respect to the mechanical properties. It is shown that boron increases the impact toughness more effectively in the tempering regime, while the molybdenum alloyed samples exhibit higher toughness after intercritical annealing. Most of the materials and heat treatment states follow the inverse relationship between toughness and strength, while the aluminium alloyed samples show a superior toughness after tempering.
The development of air‐hardening martensitic forging (LHD: luft härtend duktil) steels offers high material performance with a short and simple process route. In this study, five alloys (L1–L5), based on the existing LHD alloy concept but with different contents of aluminum, titanium, boron, and molybdenum, are cast at laboratory scale. The casted blocks are hot forged into semifinished products and cooled in air (uncontrolled). The tensile properties, the Charpy V‐notch impact energy, the cyclic material behavior, and the fatigue strength of the alloys L1–L5 are opposed to each other. Furthermore, the material properties are compared with the standard quench and tempered (Q+T) steel 42CrMo4 (reference material) and ranked against previously developed forging steels. The tensile properties and Charpy V‐notch impact energy are comparable with those of the reference material, whereas the new alloy concepts show a significantly higher cyclic yield strength and fatigue strength.