The results of a comprehensive experimental programme are presented for assessing the long-term microstructural modifications and evaluating the effects of microstructural rearrangement on the stress–strain behaviour of a lime-treated high-plasticity clay for road embankments. The stress–strain behaviour at different lime content and curing time was investigated by means of direct shear tests; microstructural analyses were carried out combining Scanning Electron Microscope observations and Mercury Intrusion Porosimetry tests. The results show that the stress–strain behaviour of treated clay is strongly dilatant with a high peak of strength, which increases with time and lime content. Furthermore, a hyperbolic function may be used for predicting the increase in strength at the end of the stabilisation process. Microstructural analysis shows that the treatment induces a redistribution of the porosity between macro- and micropores and an increase in matric suction, associated to a low reduction of water content and to aggregates shrinkage. This behaviour is affected by lime content and curing time since it results from the formation of the pozzolanic compounds on the surface of clay aggregates that induces both a bonding between hardened clay aggregates and an increase of their interlocking degree, with a consequent increase in the shear strength.
1 June 2018 in Geomechanics for Energy and the Environment
The paper presents the results of a characterization of kinetic characteristics of pozzolanic reaction with the aim to investigate the time-dependent modification of clay properties as a consequence of mixing with lime. Results of chemical analyses are in agreement with the increase of mechanical properties and with the observed microstructure modifications up to one year of curing time. The rate of development of pozzolanic reactions seems to be almost constant while the time required for their completion is dependent on the lime content. Pozzolanic products are responsible for the time reduction of swelling strain upon saturation as well as for the increases of yielding stress, stiffness and hydraulic conductivity. However, the data analysis proves that a significant component of settlement measured during loading may be induced by the secondary compression process (creep). These results are significant for the prediction of the long-term behaviour of the stabilized soil.
1 March 2020 in Geomechanics for Energy and the Environment