Toshiharu Kazama

Prof. Toshiharu Kazama


Research Focus & Metrics

Academic Career Length

30Years (1997-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2001 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Closed access
TKToshiharu Kazama
Toshiharu Kazama
PEP Ehret
P Ehret
CTC. M. Taylor
C. M. Taylor
The assumptions of a quadratic temperature profile and mean viscosity across the film, which are frequently used in the analysis of thermal elastohydrodynamic lubrication (EHL), are examined and discussed. Two different approaches for solving the thermal EHL problem are compared for line contact conditions, namely (a) a one-dimensional model based upon both the assumption of a quadratic temperature profile and the adoption of the mean physical properties across the film and (b) a two-dimensional model which includes changes in temperature and physical properties of a lubricant across the film and which takes into account the conditions of reverse flow and heat convection across the film occurring at the inlet region. A multi-grid algorithm is implemented to solve these two conditions. The temperature profile and the general solutions in the conjunction obtained in both approaches are compared. For the one-dimensional model, results reveal that temperature peaks just prior to the inlet of the conjunction. This feature is not apparent in the two-dimensional model and results in lower values in film thickness and larger frictional coefficients than in the two-dimensional model. In the high-pressure region, both equations yield almost the same mean temperature.

1 January 2008 in Proceedings of the JFPS International Symposium on Fluid Power
Verified
Journal Article
Closed access
TKToshiharu Kazama
Toshiharu Kazama
TTTadamasa Tsuruno
Tadamasa Tsuruno
HSHayato Sasaki
Hayato Sasaki

1 January 2010 in Journal of Mechanical Science and Technology
Verified
Journal Article
Closed access
PDF file
TKToshiharu Kazama
Toshiharu Kazama
HSHayato Sasaki
Hayato Sasaki
YNYukihito Narita
Yukihito Narita

8 May 2018 in Materials Performance and Characterization
Verified
Journal Article
Closed access
TKToshiharu Kazama
Toshiharu Kazama
Hydraulic components, such as valves, pumps, and actuators, include many narrow passages in the form of nozzles, orifices, and gaps. Cavitation can occur when jets flow from high to low pressure through such sections, making it unavoidable for jets containing cavitation bubbles to impinge on the inner walls of hydraulic components. This report summarizes a series of experiments involving erosion tests, flow visualization, and pressure measurements with hydraulic oils and municipal water. For the erosion tests, the ASTM G134, Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet, method of jet cavitation erosion is used to evaluate the eroded mass loss and the specimen’s surface damage. The experimental apparatus consists of a stainless steel cylindrical chamber, a high-pressure hydraulic pump, and auxiliary hydraulic components. The main test parameters are the standoff distance, cavitation number, nozzle outlet geometry, specimen surface shape, and liquid type. The specimen mass is measured, and the eroded surfaces are recorded at specific intervals. For the visualization tests, an acrylic chamber and a digital video camera are used. Video frames are extracted as pictures and are processed by superposition. For the pressure measurements, pressure-sensitive films are used to estimate the pressure distributions on the impinged surfaces. The films are bonded on the specimen surface beforehand, exposed to the cavitating jets for a short period, and then analyzed using an image analysis system. Overall, by comparing the mass loss, surface damage, visualization pictures, and pressure mapping, the effects of the experimental parameters on the erosion characteristics are examined. Moreover, design approaches that are applicable to both oil and water-hydraulic components are proposed in order to reduce erosion by cavitating jets.

1 February 2004 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Closed access
TKToshiharu Kazama
Toshiharu Kazama
The assumptions of both a Couette flow dominance and a quadratic temperature profile across the film are commonly used in the analysis of thermal non-Newtonian elastohydrodynamic lubrication. In such calculations, the conduction across the film and the energy dissipation are assumed to be the main phenomena in the prediction of temperature rise. Consequently the gradients of the physical properties across the film as well as the reverse flow and the heat convection in all directions are assumed to have no or little impact on the general characteristics of the temperature profiles and therefore can be neglected. The objective of this paper is to assess the quality of these approximations. A comparison between both the simplified and the complete non-Newtonian thermal approach is made for the line contact problem. The complete solution is based upon the resolution of a two-dimensional energy equation, which is fully coupled with the non-Newtonian Reynolds equation. The analysis reveals some local discrepancies between both the simplified and the complete solutions. These differences are clearly visible at the inlet of the contact where a bump in the temperature profiles disappears in the simplified approach. The results also show a significant difference in the levels of temperature predicted within the high-pressure region between the simplified and complete approach. In regard to the friction coefficient, the simplified calculation forecasts a lower coefficient than that obtained with the complete formulation.

13 March 2012 in Advances in Tribology
Verified
Journal Article
Open access
PDF file
TKToshiharu Kazama
Toshiharu Kazama
YNYukihito Narita
Yukihito Narita
The mixed and fluid film lubrication characteristics of plain journal bearings with shape changed by wear are numerically examined. A mixed lubrication model that employs both of the asperity-contact mechanism proposed by Greenwood and Williamson and the average flow model proposed by Patir and Cheng includes the effects of adsorbed film and elastic deformation is applied. Considering roughness interaction, the effects of the dent depth and operating conditions on the loci of the journal center, the asperity-contact and hydrodynamic fluid pressures, friction, and leakage are discussed. The following conclusions are drawn. In the mixed lubrication regime, the dent of the bearing noticeably influences the contact and fluid pressures. For smaller dents, the contact pressure and frictional coefficient reduce. In mixed and fluid film lubrication regimes, the pressure and coefficient increase for larger dents. Furthermore, as the dent increases and the Sommerfeld number decreases, the flow rate continuously increases.