Metal halide perovskites have shown outstanding optoelectronic and nonlinear optical properties; yet, to realize wafer-scale high-performance perovskite-integrated photonics, the materials also need to have excellent ambient stability and compatibility with nanofabrication processes. In this work, we introduce Dion-Jacobson (D-J) phase perovskites for photonic device applications. By combining self-assembled monolayer-assisted film growth with thermal pressing, we obtain a series of compact and extremely smooth D-J phase perovskite thin films that exhibit excellent stability during electron-beam lithography, solvent development, and rinse. Combining spectroscopic and morphological characterizations, we further demonstrate how organic spacers can be used to fine-tune the photophysical properties and processability of the perovskite films. The distributed-feedback lasers based on the D-J phase perovskites exhibit a low lasing threshold (5.5 μJ cm −2 pumped with nanosecond laser), record high Q factor (up to 30,000), and excellent stability, with an unencapsulated device demonstrating a T90 beyond 60 hours in ambient conditions (50% relative humidity).
We propose a high-sensitive Sagnac-interferometer biosensor based on theVernier effect (VE) with a high-birefringence microfiber. The sensitivity enhancement is achieved by utilizing two cascaded Sagnac interferometers. One of the two interference loops consists of a panda polarization-maintaining fiber as a filter, whilst the other is comprised of high-birefringent microfiber coated Graphene oxide (GO) as a sensing channel. We theoretically analyzed the sensitivity of the sensor and verified it with experiments. The results of the simulation show that the refractive index sensitivity is more than five times that of the fiber sensor based on a single Sagnac loop. The sensitivity of the refractive index in the experiments can reach 2429 nm/refractive index unit (RIU), which is basically in accordance with the simulation. We also use electrostatic adsorption to coat GO on the surface of the sensing channel. GO is employed to adsorb bovine serum albumin (BSA) molecules to achieve the desired detection results, which has good biocompatibility and large specific surface area. The sensitivity to detect BSA can reach 9.097 nm/(mg×mL−1).
In this paper, we proposed a novel D-shaped microstructure fiber sensor based on lossy mode resonance (LMR). TiO2/HfO2 bilayer film is coated on the exposed-core portion of photonic crystal fiber (PCF) as a sensing channel. The asymmetrical LMR region generates strong birefringence, which leads to the separation of X polarization and Y polarization. This structure excites a stronger evanescent field than the conventional D-shaped fiber, thereby greatly improving the sensor sensitivity. Additionally, the metallic oxide bilayer can further enhance the sensor’s performance. We numerically investigated the influence of the number of air holes removed in PCF on the sensor performance and the proportion of TiO2 to HfO2 in theory for the first time. The results show that an ultra-high sensitivity of 140,000 nm/RIU is obtained, which is an order of magnitude higher than that of surface plasmon resonance sensors with a similar waveguide structure and LMR sensor coated film. This achievement means that LMR-based sensing systems are more sensitive than many sensors in real-time and distributed measurements, which will play an extremely important guiding role in the structural design of microstructure fiber sensors in the future.
We design and theoretically model a highly sensitive pressure sensor based on lossy mode resonance with a microstructure fiber. The microstructure fiber sensor is manufactured with an exposed-core photonics crystal fiber, on which a TiO2/HfO2/rubber polymer trilayer is coated. Using the sensitive film as a sensing channel avoids filling the air holes with liquid. Strong birefringence with x-polarized and y-polarized peaks is generated because of the asymmetric sensing region. The y-polarization has a higher coupling efficiency and the sensitivity of the y-polarized peak is higher than that of the x-polarization. An extremely high refractive index (RI) sensitivity 67 000 nm/RIU is obtained in the sensing range of 1.33–1.39. The TiO2/HfO2 bilayer film dramatically increases the pressure sensitivity of the sensor to a peak of 5.0μm/MPa, which is 2.5 times more sensitive than previously reported lossy mode resonance (LMR) sensors. In addition, the performance of the sensor is optimized by adjusting the type and thickness of the film. This paper provides a reference for developing a microstructure pressure sensor based on lossy mode resonance.
Nanoimprint lithography (NIL) offers a scalable route to high-resolution patterning of perovskite photonic devices; however, the performance potential of NIL-patterned perovskite photonic structures remains largely unrealized because of limited understanding of perovskite thermomechanical behavior during imprinting. Here, we provide a mechanistic framework elucidating the coupled thermomechanical processes governing NIL in quasi–two-dimensional Dion-Jacobson perovskites. We show that imprinting in the cubic phase uniquely enables the simultaneous enhancement of viscoelastic deformability and mechanical hardness, facilitating high-fidelity pattern transfer while preserving structural integrity. We further uncover a spacer-dependent mechanical-optical trade-off: Flexible spacers promote plastic flow and surface planarization, yielding higher- Q resonances, whereas rigid spacers enhance crystallinity during Ostwald ripening–driven recrystallization, reducing lasing thresholds. Leveraging these insights, we demonstrate bound-state-in-the-continuum perovskite lasers achieving a record-high Q factor (up to 36,000) and low lasing thresholds (down to 5 microjoules per square centimeter) in separately optimized devices, while sustaining stable single-mode emission for over 151 hours under ambient conditions.